Gear-Spray Lubrication Systems - Graco Inc.

TYPICAL MULTIPLE INSTALLATION
Remember...
Trabon Spray Lubrication Can
Extend Gear-Life Three Ways
1
SPRAY-CONTROL VALVE PROVIDES
MOST FLEXIBILITY —
When supplied with lubricant under pressure the Spray-Control
Valve automatically allows pressurized air to enter the mixing
nozzle creating the spray pattern. This device will handle oil or
grease and can be added to existing bearing lubrication systems
where multi-purpose lubricants are used, or used for gear
lubrication only. When lubricant metering ceases, Valve shuts off
air automatically.
2
SPRAY NOZZLE TECHNIQUE IDEAL FOR
“TIMED” HEAVY-DUTY LUBRICATION OF
MILL ROLL NECKS, TABLE GEARS —
Eliminating Spray-Control Valves this method employs central
control of nozzle air by means of a timer-controlled air solenoid
valve. The same timer can be used to energize the gear-lube
pump. (If MSA or ALS Air Pump is used, pump actuation can be
controlled by the same valve that supplies air to nozzles.)
3
COMPACT, “PACKAGED” SPRAY PANELS
FOR BULL GEARS INCLUDE MSA AIR
PUMP, LUBE RESERVOIR, NOZZLES
AND METERING DISTRIBUTOR —
Custom-fabricated to fit your bull gear, Trabon spray panels may
be manually or timer-controlled. (Manual or solenoid air valve.)
Panel for 1 to 6 air-lube spray nozzle is designed to fit into cutout
section of gear guard. In addition to nozzles, “MS” or “MX”
metering assembly, MSA Pump and Reservoir panel may also be
equipped with Recorder and Air Solenoid Valve.
Typical Spray Panel
package may include
Recorder, in addition
to basic MSA Air
Pump, Reservoir,
Metering Assembly,
Spray Nozzles and Air
Pressure Regulator.
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Contact us today!
To receive product information or talk with a Graco representative,
call 800-533-9655 or visit us online at www.graco.com.
©2006-2009 Graco Inc. Form No. L20141 Rev. B 3/09 Printed in U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All written and
visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.