eAFK - Oerlikon Barmag - Oerlikon Textile

Cooling solutions
Depending on product and process, the right combination of heating and cooling components is important
for an optimized yarn production – crucial in today’s demanding markets. Oerlikon Barmag offers a variety of
cooling components that are designed to work in harmony with our heater products.
Plate
Cooling plates have been developed by Oerlikon Barmag in line with the heaters. Respectively they offer the same process
relevant features such as anti-wear nitrated surfaces, deep V profi le and special pinches for preventing yarn cool-outs.
Cooling plates are available in various lengths to allow optimal heat transfer, depending on the product.
Cooling
length
Titer range
den
10 eAFK – Oerlikon Barmag
Preferred
operational
range
Yarn
treatment
Usually in
combination
with heater
0.70 m 20 – 150 20 – 100 ++ 1.5 m DT*
2.0 m DT*
0.85 m 20 – 200 20 – 150 + 1.5 m DT*
2.0 m DT*
Typically used for
polymer/den
PA, PP, PTT
20 – 70
PA, PP, PTT
20 – 100
1.10 m 30 – 300 30 – 200 o 2.0 m DT* PET, PA, PP, PTT
30 – 200
1.75 m 30 – 300 30 – 300 - 2.0 m DT*
1.0 m HTI*
PET, PA, PP, PTT
30 – 300
Typical application
Fine yarn, micro and
multifi lament
Fine yarn, micro and
multifi lament
Average commodities
Fine yarn
commodities
2.10 m 100 – 600 150 – 600 -- 2.5 m DT* PET, PA, PP, PTT Coarse
*DT = Dowtherm
*HTI = High Temperature Insertion