vlan 20

More documents

Recommendations

Info

Port based • Each switch port intended for an end device is configured to belong to a VLAN. • Any device connecting to that port belongs to the port’s VLAN. • There are other ways of assigning VLANs but this is now the normal way. • Ports that link switches can be configured to carry traffic for all VLANs (trunking)
Types of VLAN • Data or user VLAN • Voice VLAN • Management VLAN • Native VLAN • Default VLAN
Page 1 and 2: VLANs CCNA Exploration Semester 3 C
Page 3 and 4: Some requirements of LANs • Need
Page 5 and 6: Solution using routers BUT • Rout
Page 7 and 8: VLANs • All hosts in a VLAN have
Page 9: VLAN information • VLAN informati
Page 13 and 14: Voice VLAN • Use with IP phone.
Page 15 and 16: Native VLAN • For backward compat
Page 17 and 18: Static VLAN • The normal type. Po
Page 19 and 20: Traffic between VLANs • Layer 2 s
Page 21 and 22: Trunking • Traffic for all the VL
Page 23 and 24: Frame tagging IEEE 802.1Q Dest Add
Page 25 and 26: Configure trunk port • Make a por
Page 27 and 28: Assign port to VLAN • SW1(config)
Page 29 and 30: Show commands • show vlan brief (
Page 31 and 32: Delete a VLAN • SW1(config)#no vl
Page 33 and 34: Configure trunk • SW1(config)#int
Page 35: The End

vlan 20

Create successful ePaper yourself

Delete template?

Save as template?