vlan 20

More documents

Recommendations

Info

Management VLAN • Has the switch IP address. • Used for telnet/SSH or web access for management purposes. • Better not to use VLAN 1 for security reasons.
Native VLAN • For backward compatibility with older systems. • Relevant to trunk ports. • Trunk ports carry traffic from multiple VLANs. • VLAN is identified by a “tag” in the frame. • Native VLAN does not have a tag.
Page 1 and 2: VLANs CCNA Exploration Semester 3 C
Page 3 and 4: Some requirements of LANs • Need
Page 5 and 6: Solution using routers BUT • Rout
Page 7 and 8: VLANs • All hosts in a VLAN have
Page 9 and 10: VLAN information • VLAN informati
Page 11 and 12: Types of VLAN • Data or user VLAN
Page 13: Voice VLAN • Use with IP phone.
Page 17 and 18: Static VLAN • The normal type. Po
Page 19 and 20: Traffic between VLANs • Layer 2 s
Page 21 and 22: Trunking • Traffic for all the VL
Page 23 and 24: Frame tagging IEEE 802.1Q Dest Add
Page 25 and 26: Configure trunk port • Make a por
Page 27 and 28: Assign port to VLAN • SW1(config)
Page 29 and 30: Show commands • show vlan brief (
Page 31 and 32: Delete a VLAN • SW1(config)#no vl
Page 33 and 34: Configure trunk • SW1(config)#int
Page 35: The End

vlan 20

Create successful ePaper yourself

Delete template?

Save as template?