Emergency Range - Hüco Electronic GmbH

Emergency Range
The multipower combined ballast &
emergency solution
Visit: www.hueco.com

In order to satisfy the ever increasing demands from
government legislation, customers and end users
for greater reliability, efficiency and cost savings
in emergency lighting, HÜCO has introduced the
Fusion range of combined electronic ballast and
emergency inverters.

The Multipower Combined Ballast &
Emergency solution
As an independent supplier with a global sales and
support network, HÜCO listened to its customers and
the lighting industry to create a range of products
that were designed to provide a high quality cost
effective solution, suitable for use in a wide variety
of applications.
The HÜCO Fusion range combines the industry-leading reliability
of the HÜCO ballast with the latest in emergency &
battery technology, offering the customer the total confidence
and reassurance they require from emergency lighting products.
The combined ballast-inverter eliminates the risk of failure
during change over and resolves all possible compatibility
issues associated with the use of two different manufacturers
products within the one luminaire.
This gives greater confidence to end user that, should an
emergency occur, the lighting will perform as expected and
assist in the safe evacuation of the building.
The Fusion range utilises HLC-E (Huco Lamp Control Emergency)
technology, this provides cathode heating to the lamp
for the full duration of the time spent in emergency mode
considerably increasing lamp life under emergency conditions
With the use of advanced ASIC & laser trimming Multipower
technology, HÜCO has created a range of just 12 CFL combined
ballast-inverter products, available in both 1 & 3 hour
emergency durations. These products cover 26 different lamp
combinations in single and twin lamp options.
Combined ballast
and inverter
Common solution with
separate inverter

PRODUCT BENEFITS
Alongside the normal benefits of utilising HF electronic ballasts and the HLC-E technology, the
Fusion product range offers other important advantages:
Due to the combined nature of the product, switching
times between normal and emergency mode are

HLC-E
Advantages of HÜCO Lamp Control - Emergency
This cathode heating protects the cathode and can
dramatically improve expected lamp life and switching
cycles in emergency mode when compared to traditional
emergency inverter technology.
The life time of the lamp when run in emergency mode
is almost comparable with the life time of lamp run under
normal conditions thus reducing the risk of the luminaire
failing due to premature aging of the lamp
The Fusion products are suitable for use with both
Amalgam & Non-Amalgam across all lamp types and
wattages, avoiding the need for luminaire manufacturers
to label products with lamp restrictions and averting
potential safety issues during future lamp replacement
where lamp type advice is ignored.
With warm cathodes and a greater stability in lamp
temperature, higher and more constant BLF figures can be
achieved, making emergency lighting calculations more
predictable for the full emergency duration.

One range of products, many advantages fo
PERFORMANCE
The high reliability of a
HÜCO ballast:
• Suitable for amalgam and standard lamps
• High frequency operation of the lamps in
normal and emergency mode
• Wide range for input voltage (198-264V)
• Warmstart in normal mode
• Cathode heating in emergency mode
• 1 and 3 hours operation time in emergency mode
USER FRIENDLY
Combined solution minimizes
faults in application:
• 100 % compatible to standard ballasts
• Small industry standard housing sizes
• Suitable for standard and high intensity LEDs
• Colour coded connectors for ease of installation
• Easy function test via external switch
• Reverse battery protection
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Lifetime above 50.000h at max. tc
• Low power losses
Article No.
Overview Fusion Ballasts
Description
Number
of lamps
095415 BL-CP 1x28W TC-DD HC 3H 1 3h
095416 BL-CP 1x38W TC-DD HC 3H 1 3h
095417 BL-CP 1x55W TC-DD HC 3H 1 3h
095420 BL-CP 1x8W T5 HC 1H 1 1h
095430 BL-CP 1x8W T5 HC 3H 1 3h
095423 BL-CP 1x9-16W HC 1H 1 1h
095433 BL-CP 1x9-16W HC 3H 1 3h
095424 BL-CP 1x18W TC-DEL/TEL HC 1H 1 1h
095434 BL-CP 1x18W TC-DEL/TEL HC 3H 1 3h
095425 BL-CP 1x18-32W HC 1H 1 1h
095435 BL-CP 1x18-32W HC 3H 1 3h
095426 BL-CP 1x36-42W HC 1H 1 1h
095436 BL-CP 1x36-42W HC 3H 1 3h
095443 BL-CP 2x9-13W HC 1H 2 1h
095453 BL-CP 2x9-13W HC 3H 2 3h
095444 BL-CP 2x18W TC-DEL/TEL HC 1H 2 1h
095454 BL-CP 2x18W TC-DEL/TEL HC 3H 2 3h
095445 BL-CP 2x18-26W HC 1H 2 1h
095455 BL-CP 2x18-26W HC 3H 2 3h
095448 BL-CP 2x26-42W HC 1H 2 1h
095458 BL-CP 2x26-42W HC 3H 2 3h
TC-SEL
TC-DEL
TC-TEL
Duration 9W 11W 10W 13W 18W 26W 13W 18W

your business.
SECURITY
According and excelling the
relevant standards:
• General and safety requirements:
EN 61347-1:2001 + EN 61347-2-3
• Performance requirements: EN 60929
• Radio interference: EN 55015:2000
• EMC immunity requirements: EN 61547
• Mains current harmonics: EN 61000-3-2
• Fluctuations and flicker: EN 61000-3-3
• Safety requirements: EN 61347-2-7
• Performance DC supplied electronic ballast:
EN 60925:1991 (Relevant clauses)
• Luminaries for Emergency Lighting: according to
EN 60598-2-22 (Relevant clauses)
TC-TEL
TC-L TC-F TC-DD T5c T5
26W 32W 42W 18W 24W 36W 40W 18W 24W 36W 10W 16W 28W 38W 55W 22W 40W 8W Page No.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

EVG-CP 1x28W TC-DD HC 3H
Article Number: 09 5415
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
1x28W TC-DD
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,96c
Input current
0,15 A
Circuit power
33 W
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode 10%
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
67
79
n.c.
n.c.
n.c.
n.c.
27,5
33
Attention! Preliminary data!
Subject to technical modification

EVG-CP 1x38W TC-DD HC 3H
Article Number: 09 5416
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
1x38W TC-DD
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,98c
Input current
0,19 A
Circuit power
44 W
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode 8%
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
n.c.
n.c.
n.c.
n.c.
67
79
27,5
33
www.hueco.com

EVG-CP 1x55W TC-DD HC 3H
Article Number: 09 5417
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
1x55W TC-DD
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,98c
Input current
0,27 A
Circuit power
61 W
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode 7%
Size (L x W x H)
123 x 102 x 33 mm
Weight
240 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 6
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6140 6D Cell Side by Side NiCd 30
09 6141 6D Cell Stick NiCd 30
09 6109 Battery - Box 6D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
122,6
110,5
4,5
Switched
supply
101,6
90
(142.5)
4,5
99
4,5
32,8
27,3
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
10
Attention! Preliminary data!
Subject to technical modification

EVG-CP 1x8W T5 HC 1H
Article Number: 09 5420
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
1x8W T5
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,90c
Input current
0,05 A
Circuit power
11 W
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode 38%
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 4
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6112 4Cs Cell Side by Side NiCd 29
09 6113 4Cs Cell Stick NiCd 29
09 6104 Battery - Box 4Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
n.c.
n.c.
n.c.
n.c.
67
79
27,5
33
www.hueco.com 11

EVG-CP 1x8W T5 HC 3H
Article Number: 09 5430
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
1x8W T5
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,90c
Input current
0,06 A
Circuit power
12 W
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode 42%
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
67
79
n.c.
n.c.
n.c.
n.c.
27,5
33
12
Attention! Preliminary data!
Subject to technical modification

EVG-CP 1x9-16W HC 1H
Article Number: 09 5423
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
9W 10W 11W 13W 16W
TC-SEL 1x 1x
TC-DEL 1x 1x
TC-TEL
1x
TC-DD 1x 1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x9W TC-SEL 0.06A 11,5W 19%
1x11W TC-SEL 0.07A 15W 19%
1x10W TC-DEL 0.06A 12W 17%
1x13W TC-DEL 0.08A 16W 13%
1x13W TC-TEL 0.08A 16W 15%
1x10W TC-DD 0.06A 14W 27%
1x16W TC-DD 0.08A 17W 18%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.91c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 4
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6112 4Cs Cell Side by Side NiCd 29
09 6113 4Cs Cell Stick NiCd 29
09 6104 Battery - Box 4Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
n.c.
n.c.
n.c.
n.c.
67
79
27,5
33
www.hueco.com 13

EVG-CP 1x9-16W HC 3H
Article Number: 09 5433
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
9W 10W 11W 13W 16W
TC-SEL 1x 1x
TC-DEL 1x 1x
TC-TEL
1x
TC-DD 1x 1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x9W TC-SEL 0.06A 12,5W 19%
1x11W TC-SEL 0.07A 16W 19%
1x10W TC-DEL 0.06A 13W 17%
1x13W TC-DEL 0.08A 17W 15%
1x13W TC-TEL 0.08A 17W 17%
1x10W TC-DD 0.06A 15W 24%
1x16W TC-DD 0.08A 18W 15%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.91c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
67
79
n.c.
n.c.
n.c.
n.c.
27,5
33
14
Attention! Preliminary data!
Subject to technical modification

09
EVG-CP 1x18W TC-DEL/TEL HC 1H
Article Number: 09 5424
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Lamp types
TC-DEL
TC-TEL
18W
1x
1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x18W TC-DEL 0.1A 21W 15%
1x18W TC-TEL 0.1A 22W 13%
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,95c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 4
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6112 4Cs Cell Side by Side NiCd 29
09 6113 4Cs Cell Stick NiCd 29
09 6104 Battery - Box 4Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
n.c.
n.c.
n.c.
n.c.
67
79
27,5
33
www.hueco.com 15

EVG-CP 1x18W TC-DEL/TEL HC 3H
Article Number: 09 5434
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Lamp types
TC-DEL
TC-TEL
18W
1x
1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x18W TC-DEL 0.1A 22W 15%
1x18W TC-TEL 0.1A 23W 13%
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,95c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
67
79
n.c.
n.c.
n.c.
n.c.
27,5
33
16
Attention! Preliminary data!
Subject to technical modification

EVG-CP 1x18-32W HC 1H
Article Number: 09 5425
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Lamp types
18W 22W 24W 26W 32W
TC-DEL
1x
TC-TEL 1x 1x
TC-L 1x 1x
TC-F 1x 1x
T5c
1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x26W TC-DEL 0.14A 30W 12%
1x26W TC-TEL 0.14A 30W 10%
1x32W TC-TEL 0.17A 38W 9.5%
1x18W TC-L 0.11A 20W 10%
1x24W TC-L 0.13A 26W 10%
1x18W TC-F 0.11A 20W 10%
1x24W TC-F 0.13A 26W 10%
1x22W T5c 0.12A 27W 12%
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.93c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 5
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6122 5Cs Cell Side by Side NiCd 29
09 6123 5Cs Cell Stick NiCd 29
09 6106 Battery - Box 5Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
n.c.
n.c.
n.c.
n.c.
67
79
27,5
33
www.hueco.com 17

EVG-CP 1x18-32W HC 3H
Article Number: 09 5435
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Lamp types
18W 22W 24W 26W 32W
TC-DEL
1x
TC-TEL 1x 1x
TC-L 1x 1x
TC-F 1x 1x
T5c
1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x26W TC-DEL 0.14A 31W 12%
1x26W TC-TEL 0.14A 31W 10%
1x32W TC-TEL 0.17A 39W 9.5%
1x18W TC-L 0.08A 21W 11%
1x24W TC-L 0.13A 27W 11%
1x18W TC-F 0.11A 21W 11%
1x24W TC-F 0.13A 27W 11%
1x22W T5c 0.12A 28W 15%
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.93c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 5
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6120 5D Cell Side by Side NiCd 30
09 6121 5D Cell Stick NiCd 30
09 6107 Battery - Box 5D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
(129,5)
123
111
4,5
4,5
99
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
67
79
n.c.
n.c.
n.c.
n.c.
27,5
33
18
Attention! Preliminary data!
Subject to technical modification

EVG-CP 1x36-42W HC 1H
Article Number: 09 5426
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
36W 40W 42W
TC-TEL
1x
TC-L 1x 1x
TC-F 1x
T5c
1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x42W TC-TEL 0.20A 44W 11%
1x36W TC-L 0.16A 36W 10%
1x40W TC-L 0.20A 46W 11%
1x36W TC-F 0.16A 33W 10%
1x40W T5c 0.18A 40W 10%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.95c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 102 x 33 mm
Weight
240 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 6
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6143 6Cs Cell Side by Side NiCd 29
09 6144 6Cs Cell Stick NiCd 29
09 6108 Battery - Box 6Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
122,6
110,5
4,5
101,6
90
(142.5)
4,5
99
4,5
32,8
27,3
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
www.hueco.com 19

EVG-CP 1x36-42W HC 3H
Article Number: 09 5436
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
36W 40W 42W
TC-TEL
1x
TC-L 1x 1x
TC-F 1x
T5c
1x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
1x42W TC-TEL 0.21A 46W 9%
1x36W TC-L 0.17A 38W 10%
1x40W TC-L 0.21A 48W 11%
1x36W TC-F 0.17A 35W 10%
1x40W T5c 0.19A 42W 10%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.95c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 102 x 33 mm
Weight
240 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 6
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6140 6D Cell Side by Side NiCd 30
09 6141 6D Cell Stick NiCd 30
09 6109 Battery - Box 6D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
122,6
110,5
4,5
Switched
supply
101,6
90
(142.5)
4,5
99
4,5
32,8
27,3
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
20
Attention! Preliminary data!
Subject to technical modification

EVG-CP 2x9-13W HC 1H
Article Number: 09 5443
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
9W 10W 11W 13W
TC-SEL 2x 2x
TC-DEL 2x 2x
TC-TEL
2x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
2x9W TC-SEL 0.10A 22W 19%
2x11W TC-SEL 0.13A 29W 19%
2x10W TC-DEL 0.10A 22W 17%
2x13W TC-DEL 0.14A 31W 14%
2x13W TC-TEL 0.14A 31W 16%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.95c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 4
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6112 4Cs Cell Side by Side NiCd 29
09 6113 4Cs Cell Stick NiCd 29
09 6104 Battery - Box 4Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
67
79 L
(129,5)
123
111
4,5
27,5
33
4,5
99
Switched
supply
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
www.hueco.com 21

EVG-CP 2x9-13W HC 3H
Article Number: 09 5453
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
9W 10W 11W 13W
TC-SEL 2x 2x
TC-DEL 2x 2x
TC-TEL
2x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
2x9W TC-SEL 0.11A 23W 19%
2x11W TC-SEL 0.14A 30W 19%
2x10W TC-DEL 0.11A 24W 17%
2x13W TC-DEL 0.14A 32W 15%
2x13W TC-TEL 0.14A 32W 17%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.95c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
67
79 L
(129,5)
123
111
4,5
27,5
33
4,5
99
Switched
supply
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
22
Attention! Preliminary data!
Subject to technical modification

EVG-CP 2x18W TC-DEL/TEL HC 1H
Article Number: 09 5444
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Lamp types
TC-DEL
TC-TEL
18W
2x
2x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
2x18W TC-DEL 0.18A 39W 15%
2x18W TC-TEL 0.18A 39W 13%
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,97c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 4
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6112 4Cs Cell Side by Side NiCd 29
09 6113 4Cs Cell Stick NiCd 29
09 6104 Battery - Box 4Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
67
79 L
(129,5)
123
111
4,5
27,5
33
4,5
99
Switched
supply
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
www.hueco.com 23

EVG-CP 2x18W TC-DEL/TEL HC 3H
Article Number: 09 5454
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Lamp types
TC-DEL
TC-TEL
18W
2x
2x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
2x18W TC-DEL 0.18A 41W 15%
2x18W TC-TEL 0.18A 40W 13%
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0,97c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 4
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6110 4D Cell Side by Side NiCd 30
09 6111 4D Cell Stick NiCd 30
09 6105 Battery - Box 4D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
67
79 L
(129,5)
123
111
4,5
27,5
33
4,5
99
Switched
supply
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
24
Attention! Preliminary data!
Subject to technical modification

EVG-CP 2x18-26W TC-DEL/TEL HC 1H
Article Number: 09 5445
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
18W 22W 24W 26W
TC-DEL
2x
TC-TEL
2x
TC-L 2x 2x
TC-F 2x 2x
T5c
2x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
2x26W TC-DEL 0.25A 56W 12%
2x26W TC-TEL 0.25A 55W 10%
2x18W TC-L 0.16A 36W 10%
2x24W TC-L 0.23A 53W 10%
2x18W TC-F 0.16A 34W 10%
2x24W TC-F 0.23A 49W 10%
2x22W T5c 0.21A 48W 12%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.96c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 1.5 Ah
Number of cells 5
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6122 5Cs Cell Side by Side NiCd 29
09 6123 5Cs Cell Stick NiCd 29
09 6106 Battery - Box 5Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
67
79 L
(129,5)
123
111
4,5
27,5
33
4,5
99
Switched
supply
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
www.hueco.com 25

EVG-CP 2x18-26W TC-DEL/TEL HC 3H
Article Number: 09 5455
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
Lamp types
18W 22W 24W 26W
TC-DEL
2x
TC-TEL
2x
TC-L 2x 2x
TC-F 2x 2x
T5c
2x
Lamp type details
Lampcombination
Input current
Circuit
power
BLF in
emergency
mode
2x26W TC-DEL 0.26A 57W 10%
2x26W TC-TEL 0.26A 56W 14%
2x18W TC-L 0.16A 37W 11%
2x24W TC-L 0.23A 54W 11%
2x18W TC-F 0.16A 35W 11%
2x24W TC-F 0.23A 50W 11%
2x22W T5c 0.22A 49W 15%
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.96c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 79 x 33 mm
Weight
225 g
Technical Data - Battery
Battery type
Ni-Cd 4 Ah
Number of cells 5
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
Accessories
Article Number Description Page
09 6120 5D Cell Side by Side NiCd 30
09 6121 5D Cell Stick NiCd 30
09 6107 Battery - Box 5D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
67
79 L
(129,5)
123
111
4,5
27,5
33
4,5
99
Switched
supply
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
26
Attention! Preliminary data!
Subject to technical modification

EVG-CP 2x26-42W TC-DEL/TEL HC 1H
Article Number: 09 5448
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
1 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.97c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 102 x 33 mm
Weight
240 g
Lamp types
22W 26W 32W 36W 40W 42W
TC-DEL
2x
TC-TEL 2x 2x 2x
TC-L 2x 2x
TC-F
2x
T5c 2x 2x
Lamp type details
Lampcombination
Technical Data - Battery
Input current
Circuit
power
Battery type
Ni-Cd 1.5 Ah
Number of cells 6
Cell type
Cs
Cell voltage
1,2 V
Duration time
1 h
Recharge time
24 h
BLF in
emergency
mode
2x26W TC-DEL 0.26A 59W 10%
2x26W TC-TEL 0.26A 59W 14%
2x32W TC-TEL 0.29A 65W 9.5%
2x42W TC-TEL 0.39A 88W 11%
2x36W TC-L 0.30A 68W 10%
2x40W TC-L 0.39A 89W 11%
2x36W TC-F 0.30A 67W 10%
2x22W T5c 0.21A 49W *
2x40W T5c 0.33A 76W 10%
Accessories
* Not suitable for emergency mode
Article Number Description Page
09 6143 6Cs Cell Side by Side NiCd 29
09 6144 6Cs Cell Stick NiCd 29
09 6108 Battery - Box 6Cs 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
122,6
110,5
4,5
101,6
90
(142.5)
4,5
99
4,5
32,8
27,3
Switched
supply
L
N
Unswitched
L1
supply
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
www.hueco.com 27

EVG-CP 2x26-42W TC-DEL/TEL HC 3H
Article Number: 09 5458
Product Highlights
• 100 % compatible with standard ballasts
• Suitable for amalgam and standard lamps
• Small industry standard housing sizes
• Lifetime above 50.000 h at tc max.
• Wide range for input voltage (198-253V)
• Warmstart in normal mode
• HLC-E Cathode heating in emergency mode
• Short switching times between normal and
emergency mode (< 150 ms)
• Deep discharge protection
• Reverse battery protection
• Colour coded connectors for ease of
installation
• Easy function test via external switch
Additional Product Highlights
HLC-E
EN 60929 EN 61000-3-2
Technical Data - Ballast
Lamp types
see table
Duration time
3 h
Rated Voltage 220...240 V~
Frequency
50…60 Hz
Powerfactor > 0.97c
Input current
see table
Circuit power
see table
Ambient temperature ta
0 ˚C…50 ˚C
Tc max.
75 ˚C
BLF in normal mode > 95%
BLF in emergency mode
see table
Size (L x W x H)
123 x 102 x 33 mm
Weight
240 g
Lamp types
22W 26W 32W 36W 40W 42W
TC-DEL
2x
TC-TEL 2x 2x 2x
TC-L 2x 2x
TC-F
2x
T5c 2x 2x
Lamp type details
Lampcombination
Technical Data - Battery
Input current
Circuit
power
Battery type
Ni-Cd 4 Ah
Number of cells 6
Cell type
D
Cell voltage
1,2 V
Duration time
3 h
Recharge time
24 h
BLF in
emergency
mode
2x26W TC-DEL 0.27A 61W 14%
2x26W TC-TEL 0.27A 60W 13%
2x32W TC-TEL 0.30A 69W 9.5%
2x42W TC-TEL 0.39A 89W 11%
2x36W TC-L 0.30A 69W 10%
2x40W TC-L 0.40A 90W 11%
2x36W TC-F 0.30A 69W 10%
2x22W T5c 0.23A 51W *
2x40W T5c 0.34A 78W 10%
Accessories
* Not suitable for emergency mode
Article Number Description Page
09 6140 6D Cell Side by Side NiCd 30
09 6141 6D Cell Stick NiCd 30
09 6109 Battery - Box 6D 31
09 6151 LED 5 mm green 31
09 6152 LED 5 mm green high intensity 31
09 6153 LED 3 mm green 31
Technical Drawing
Wiring Diagram
122,6
110,5
4,5
Switched
supply
L
N
Unswitched
supply
L1
Battery -
Battery +
LED -
LED +
Test
switch
Lamp
Lamp
101,6
90
(142.5)
4,5
99
4,5
32,8
27,3
28
Attention! Preliminary data!
Subject to technical modification

Batteries cell type Cs (1 hour)
L
5mm slot
W
Lead length 230mm
Article Number 096113 096123 096144
Description 4 Cs Cell Stick Ni-Cd 5 Cs Cell Stick Ni-Cd 6 Cs Cell Stick Ni-Cd
Battery type Ni-Cd 1.5 Ah Ni-Cd 1.5 Ah Ni-Cd 1.5 Ah
Number of cells 4 5 6
Cell type Cs Cs Cs
Cell voltage 1,2 V 1,2 V 1,2 V
Charge current 80 mA 80 mA 80 mA
Discharge current 1100 mA 1100 mA 1100 mA
Duration time 1 h 1 h 1 h
Recharge time 24 h 24 h 24 h
Battery Temperature 15˚C…55˚C 15˚C…55˚C 15˚C…55˚C
Battery lifetime 4 Years 4 Years 4 Years
Size (L x W x H) 190x26x26 mm 232x26x26 mm 274x26x26 mm
Weight 190 g 237 g 285 g
L
Lead length 230mm
W
Article Number 096112 096122 096143
Description 4 Cs Cell Side by Side Ni-Cd 5 Cs Cell Side by Side Ni-Cd 6 Cs Cell Side by Side Ni-Cd
Battery type Ni-Cd 1.5 Ah Ni-Cd 1.5 Ah Ni-Cd 1.5 Ah
Number of cells 4 5 6
Cell type Cs Cs Cs
Cell voltage 1,2 V 1,2 V 1,2 V
Charge current 80 mA 80 mA 80 mA
Discharge current 1100 mA 1100 mA 1100 mA
Duration time 1 h 1 h 1 h
Recharge time 24 h 24 h 24 h
Battery Temperature 15˚C…55˚C 15˚C…55˚C 15˚C…55˚C
Battery lifetime 4 Years 4 Years 4 Years
Size (L x W x H) 92x45x23 mm 113x45x23 mm 137x45x23 mm
Weight 190 g 237 g 285 g
www.hueco.com 29

Batteries cell type D (3 hours)
Lead length 230mm
W
Article Number 096111 096121 096141
Description 4 D Cell Stick Ni-Cd 5 D Cell Stick Ni-Cd 6 D Cell Stick Ni-Cd
Battery type Ni-Cd 4 Ah Ni-Cd 4 Ah Ni-Cd 4 Ah
Number of cells 4 5 6
Cell type D D D
Cell voltage 1,2 V 1,2 V 1,2 V
Charge current 200 mA 200 mA 200 mA
Discharge current 1100 mA 1100 mA 1100 mA
Duration time 3 h 3 h 3 h
Recharge time 24 h 24 h 24 h
Battery Temperature 15˚C…55˚C 15˚C…55˚C 15˚C…55˚C
Battery lifetime 4 Years 4 Years 4 Years
Size (L x W x H) 268x37x37 mm 326x37x37 mm 385x37x37 mm
Weight 540 g 670 g 800 g
L
Lead length 230mm
W
D
C
B
A
Article Number 096110
L
096120 096140
Description 4 D Cell Side by Side Ni-Cd 5 D Cell Side by Side Ni -Cd 6 D Cell Side by Side Ni-Cd
Battery type Ni-Cd 4 Ah Ni-Cd 4 Ah Ni-Cd 4 Ah
Number of cells 4 5 6
Cell type D D D
Cell voltage 1,2 V 1,2 V 1,2 V
Charge current 200 mA 200 mA 200 mA
Discharge current 1100 mA 1100 mA 1100 mA
Duration time 3 h 3 h 3 h
Recharge time 24 h 24 h 24 h
Battery Temperature 15˚C…55˚C 15˚C…55˚C 15˚C…55˚C
Battery lifetime 4 Years 4 Years 4 Years
Size (L x W x H) 129x62x35 mm 161x62x35 mm 194x62x35 mm
Plate size (A x B x C x D) 116x65x62x41 mm 148x97.5x62x41 mm 180x130x62x41 mm
Weight 625 g 770 g 925 g
30 Subject to technical modification

Battery - Box
218 mm
68
mm
Battery - Box cell type Cs (1 hour)
Article Number 096104 096106 096108
Description Battery - Box 4 Cs Cell Battery - Box 5 Cs Cell Battery - Box 6 Cs Cell
Battery type Ni-Cd 1.5 Ah Ni-Cd 1.5 Ah Ni-Cd 1.5 Ah
Number of cells 4 5 6
Cell type Cs Cs Cs
Cell voltage 1,2 V 1,2 V 1,2 V
Charge current 80 mA 80 mA 80 mA
Discharge current 1100 mA 1100 mA 1100 mA
Duration time 1 h 1 h 1 h
Recharge time 24 h 24 h 24 h
Battery Temperature 15 ˚C…55˚C 15 ˚C…55˚C 15 ˚C…55˚C
Battery lifetime 4 Years 4 Years 4 Years
Size (L x W x H) 218x68x40 218x68x40 218x68x40
Weight 300 g 347g 395 g
Battery - Box cell type D (3 hours)
Article Number 096105 096107 096109
Description Battery - Box 4 D Cell Battery - Box 5 D Cell Battery - Box 6 D Cell
Battery type Ni-Cd 4 Ah Ni-Cd 4 Ah Ni-Cd 4 Ah
Number of cells 4 5 6
Cell type D D D
Cell voltage 1,2 V 1,2 V 1,2 V
Charge current 200 mA 200 mA 200 mA
Discharge current 1100 mA 1100 mA 1100 mA
Duration time 3 h 3 h 3 h
Recharge time 24 h 24 h 24 h
Battery Temperature 15 ˚C…55˚C 15 ˚C…55˚C 15 ˚C…55˚C
Battery lifetime 4 Years 4 Years 4 Years
Size (L x W x H) 218x68x40 218x68x40 218x68x40
Weight 650 g 780 g 910 g
LED
Article Number 096151 096152 096153
Description LED green 5 mm LED green 5 mm high intensity LED green 3 mm
Lead length 75 cm 75 cm 75 cm
Assembly hole 6,5 mm 6,5 mm 4,5 mm
www.hueco.com 31

Germany (Headquarters)
HÜCO electronic GmbH
Von dem Bussche-Münch-Str. 12
32339 Espelkamp
Deutschland
Phone: 0049 5772 567 700
Fax: 0049 5772 567 940
E-mail: sales.DE@hueco.com
Northern Ireland
HÜCO Lightronic N.I. Ltd.
89 Downland Road
Limavady Co. Londonderry
Northern Ireland, BT49 OHE
Phone: 0044 28 777 60 004
Fax: 0044 28 777 60 011
E-mail: sales.GB@hueco.com
Italy
HÜCO electronic GmbH
Sales Office Italy
Via Cavriana, 3
20134 Milano
Phone: 0039 02 7391 274
Fax: 0039 02 7391 410
E-mail: sales.IT@hueco.com
U.K.
HÜCO Lightronic N.I. Ltd.
Sales Office UK
Unit 6, The Gateway, 2A Rathmore Road
London SE7 7QW
Phone: 0044 28 777 60004
Fax: 0044 28 777 60 011
E-mail: sales.GB@hueco.com
China
HÜCO Lightronic N.I. Ltd.
Sales Office China
Room 722, No. 40, Dongzhong St,
Donghcheng District, 100027 Beijing
Phone: 0086 10 51 692605
Fax: 0086 10 51 692606
E-mail: sales.CN@hueco.com
Distributors
Austria
VBE Vertrieb Beleuchtung
Pragerstraße 142
1210 WIEN
Phone: 0043 1 2782424
Fax: 0043 1 2782485
E-mail: vbe@aon.at
Turkey
SPOT ELEKTRIK Ltd.
35. CAD., No. 10/2
34076 ÜSKÜDAR
Phone: 0090 216 324 33 77
Fax: 0090 216 472 87 68
E-mail: info@spotelektrik.com.tr
Australia
Lighting Australia Pty. Ltd.
Unit R2, Regents Park Estate
391 Park Road
Regents Park NSW 2143
Phone: 0061 02 9738 9444
Fax: 0061 02 9738 9499
E-mail: components@
lightingaustralia.com.au
Belgium
Tertium Sprl
11, Avenue des lilas
1640 Rhode Saint Genese
Phone: 0032 2 3614858
Fax: 0032 23 583023
E-mail: pierre@tertium.be
Sweden
Vanpée & Co. AB
Glanshammarsgatan 16
12470 Bandhagen
Phone: 0046 855 621130
Fax: 0046 864 78065
E-mail: info@vanpee.se
Danmark
Vanpée & Westerberg A/S
Transformervej 21
2730 Herlev
Phone: 0045 44 859000
Fax: 0045 44 859087
E-mail: info@vanpee.dk
Malaysia
Switzerland
UNI-TEC Engineering PTE Ltd Sir Heian
3, Lorong Bakar Batu
# 07-01 Brightway Building
Singapore 348741
Phone: 0065 6 7459422
Beleuchtungstechnik AG
Alte Steinhauserstraße 29
6330 Cham
Phone: 0041 41 7485010
Fax: 0065 6 7453930 Fax: 0041 41 7485015
E-mail: enquiries@unitec. E-mail: info@sir-heian.ch
com.sg
France
Ditronic S. A. R. L.
13, rue des hirondelles
67720 Weyersheim
Phone: 0033 388 629 027
Fax: 0033 388 681 822
E-mail: ditronic@wanadoo.fr
Greece
TransHellas
20-22, Kyparissias street
Agioi Anargir, 13562 Athen
Phone: 0030 210 4523740
Fax: 0030 210 4523010
E-mail: j.agistriotis@transhellas.com
South Korea
Norway
Israel
Jeung Han Trading Company Vanpée Norge AS
Electrosen Ltd.
135-21, Chegi-Dong
ROK Tongdaemun-Ku Seoul
Phone: 0082 29270531
Vestvollveien 6D
2020 Skedsmokkorset
Phone: 0047 648 38280
23, Hapalmach Street
51246 BNEI-BRAK
Phone: 00972 3 6184131
Fax: 0082 29270536 Fax: 0047 648 38281 Fax: 00972 3 61896805
E-mail: jeunghankr@yahoo. E-mail: firmapost@vanpee.no E-mail: info@electrosen.co.il
co.kr
Netherlands
Regoort B. V. Technische
Handelsmaatschappij
Bergstraat 8 – 12
3035 TD-ROTTERDAM
Phone: 0031 10 4658155
Fax: 0031 10 4672934
E-mail: info@regoort.nl
Spain
Industrial Eléctra Cassanense
S. A.
Crta/ de Girona a Sant Feliu
Km, 11
17244 Cassa de la Selva
Phone: 0034 972 46 01 25
Fax: 0034 972 46 19 79
E-mail: inecsa@inecsa.com