You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
August 2010<br />
Third daily <strong>report</strong><br />
Supatchaya CHUANPONGPANICH<br />
Pierre-Maxence DURUT<br />
Jinyoung LEE<br />
Benjamin ROSSE<br />
Scott THACKER<br />
Geunho YOON<br />
Shuyan WANG<br />
Advisor: Prof. ZHOU Yuwen<br />
1
09:00~12:00AM and 1:00~….PM Teamwork with Supervisors<br />
Before you begin this working day, we made a brief round of what had been done and what<br />
remains to be done ... The supervisor reminded us of the aims of the Week <strong>HydroAsia</strong> ... For him it<br />
would be preferable start modeling on the two following software: SWMM and Mouse.<br />
Also during this morning we were able to install the software modeling and operate as it<br />
should be the software. We now have 2 computers running Mouse and two others running SWMM.<br />
We try to use these two software packages to compare the results. Our team conducted the<br />
flood simulation on MOUSE in several cases and we try to obtain some various results.<br />
The following steps were done during the online and face to face meetings periods.<br />
• constructing the model<br />
• checking the model<br />
• adding boundary conditions<br />
• applying new pipe network<br />
• inspecting the result<br />
Before conducting the calculation, MOUSE requires several input data as follows like nodes<br />
(Manholes), linkes (Pipes), catchments, time series (Rainfall).We obtained all files for preparing those<br />
data from Hydro Asia website.<br />
Finally we convert all these data to input data files as MOUSE can accept through simple<br />
operation by programs. With simple steps, those data transfer to input data on MOUSE and applied<br />
to the model. They are operated by copy all excel data to Mouse in Import window.<br />
Jinyoung with Mouse<br />
Girls with Mouse<br />
And after we ran the model in the simplest condition to make sure whether the model works<br />
normally or not. Although we found the mistakes in import procedures that made too much flood,<br />
we finally succeeded to run the model properly after correcting the problems.<br />
The detailed results and inspection are showed in other <strong>report</strong>s.<br />
2
So we try to do the same with SWMM but we didn’t obtain the same facilities!!<br />
Benjamin on this day is still working on ArcGIS.<br />
3
Change language