1 Resumé of Hamish L. Fraser Ohio Regents Eminent Scholar ...

Resumé of Hamish L. Fraser
Ohio Regents Eminent Scholar
Professor of Materials Science & Engineering
Department of Materials Science & Engineering
The Ohio State University
1945 Hillside Drive
2041 College Road Upper Arlington, OH 43221
Columbus, OH 43210
USA
(614) 292-2708 (614) 292-7523 (fax) (614) 486-8670
e-mail: fraser.3@osu.edu
Birth Date: July 3, 1948
Marital Status: Married, 3 Children
Nationality: USA
Education:
Degrees Institution Date Field
B.Sc.(1st Class Hons) University of Birmingham, U.K. 1970 Physical Metallurgy
Ph.D. University of Birmingham, U.K. 1972 Physical Metallurgy
Positions Held:
Research Associate University of Birmingham (UK) 1972(3 months)
Assistant Professor University of Illinois 1973-78
Assistant Director Center for Electron Microscopy, 1973-74
University of Illinois
Associate Professor University of Illinois 1978-1979
1980-84
Senior Research Scientist United Technologies Research Center 1979-80
Adjunct Associate Professor University of Illinois 1979-80
Visiting Scientist Max-Planck Institut für Metallforschung, 1988
Institut für Werkstoffwissenschaften
Professor University of Illinois 1984-89
Adjunct Professor University of Illinois 1989-90
Visiting Professor University of Liverpool (UK) 1986-90
Senior Visitor University of Cambridge (UK) 1990-92
Present Positions:
Ohio Regents Eminent Scholar
& Professor The Ohio State University 1989-
Professor of Materials Science
and Technology (Hon.) University of Birmingham (UK) 1988-2010
1

STUDENTS GRADUATED
To date:
43 Ph.D. Degrees 36 M.S. Degrees
On-going Ph.D. Students: 12
Other Scholarly Activities:
North Atlantic Treaty Organization (NATO) (Office National d'Études et de Recherche Aérospatiale,
Paris). This involved two lectures per day for one week, and subsequent trips (about once per
year).
Government of Western Australia -- (Technology Development Authority)
Employed by the Government of Western Australia in the area of technology development., his
specific duties were to develop a plan for technology development in Western Australia,
including details of how materials engineering would be enhanced. These plans became cabinet
policy. Responsibilities included preparation of presentations made by the Deputy Premier.
Bond University, Surfers Paradise, Australia
Consulting at a one week retreat to establish the College of Science and Technology.
Science and Engineering Research Council (UK); Strategy Working Group/Materials Commission
Served on Strategy Working Group, reporting to Materials Commission of the Science and
Engineering Research Council. This group was charged with the responsibility of developing a
strategy for materials research in the UK.
External Advisory Committee, Dept. of Materials Science and Metallurgy, University of Cambridge.
Peer Review: Serves as a reviewer for numerous journals and agencies, including the NSF-DMR
Equipment and Facilities Panel.
USAF Scientific Advisory Board, Materials Panel. New World Vistas: to develop strategies for
the Air Force of the 21st Century. 1995
USAF Scientific Advisory Board, Materials Panel. To review R&D programs in Structures and
Materials at Wright Laboratories, WPAFB 1996
2

Defense Research and Engineering, Pentagon (Tri-Service), Technology Area Review and
Assessment, Member of the Materials and Processes Panel, 1998, 1999
National Materials Advisory Board, National Academies, Board Member, 2000-2004.
USAF Scientific Advisory Board, Board Member, 2002-2006
Computational Materials Science Network (CMSN): Scientific Oversight Committee Member 2003-2005
Los Alamos National Laboratory, Matls. Science & Techn. Division Review Comm., Member 2004-07
TMS, Materials Processing & Manufacturing Division: Vice-Chairperson 2004-2005
Awards
Fellow of ASM 1993
Lumley Research Award, College of Engineering, OSU 1995
Fontana Teaching Award, Department of Materials Science & Engineering, OSU 1995
Fellow of the Institute of Materials, 2001
Fellow of TMS 2005
Consulting
Air Force research Laboratory (Wright-Patterson AFB through UES Inc.)
(previously Los Alamos National Laboratory, Ribbon Technology Inc., General Electric Company ,
Pratt & Whitney, Westinghouse Central Research Labs, United Technologies Research Center,
Draper Laboratories, Inc., A.O.Smith Inc, Mitre Corporation)
Other
Member, Ohio Science and Technology Roundtable 1990-94
Member, President's and Provost's Advisory Committee, OSU 1989-
Member, Executive Committee, Center for Materials Research, OSU 1989-99
Head Coach, University of Illinois Rugby Club 1980-87
3

PUBLICATIONS & INVITED PAPERS
Research has been undertaken in three main areas, namely analytical electron microscopy;
materials processing of advanced materials, and integrated computational materials science and
engineering. Much of his current interest involves the physical metallurgy of titanium alloys. The
following publications and invited papers result from his work.
a) PUBLICATIONS
1. Direct Observations of the Annealing of Stacking Fault Tetrahedra in Gold and Voids in NiAl,
Jerkon, Annr., 155, 1971, p.410. With M.H. Loretto and R.E. Smallman.
2. Voids in the Intermetallic Compound, NiAl. Conf. on "Voids Formed by Irradiation of Reactor
Materials, Eds. Pugh, Loretto and Norris, BNES, 1971, p. 177. With M.H. Loretto, R.E. Smallman
and R.J. Wasielewski.
3. Direct Observations of the Annealing of Stacking-Fault Tetrahedra in Gold Using High Voltage
Electron Microscopy, Phil. Mag. 28, 1973, p.1043. With M.H. Loretto and R.E. Smallman.
4. Oxidation-Induced Defects in NiAl, Phil. Mag. 28, 1973, p.639. With M.H. Loretto and R.E.
Smallman.
5. The Plastic Deformation of NiAl Single Crystals Between 300K and 1050K; Part I: Experimental
Evidence on the Role of Kinking and Uniform Deformation in Crystals Compressed Along ,
Phil Mag. 28, 1973, p.651. With M.H. Loretto and R.E. Smallman.
6. The Plastic Deformation of NiAl Single Crystals Between 300K and 1050K; Part II: The
Mechanism of Kinking and Uniform Deformation, Phil. Mag. 28, 1973, p.667. With M.H. Loretto
and R.E. Smallman.
7. The Origin of Dislocation with b= in Single Crystals of β-NiAl Compressed Along at
Elevated Temperatures, Scripta Metallurgica, 8, 1974, p. 1049. With N.J. Zaluzec.
8. A Study of Kinking in Zinc and NiAl Single Crystals, "High Voltage Electron Microscopy",
Academic Press, London, Eds. P.R. Swann, C.J. Humphreys, M.J. Goringe and R.E. Smallman,
1974, 273. With E.G. Tapetado, M.H. Loretto and R.E. Smallman.
9. A Note on the Increase in Usable Foil Thickness in Scanning Transmission Electron Microscopy,
Phil Mag. 31, 1975, p.255. With I.P. Jones.
10. On the Feasibility of Quantitative Microchemical Analysis of Thin Metal Foils, 33rd Ann. Proc.
Electron Microscopy Soc. Amer., Las Vegas, Nevada, 1975, Ed. C.W. Bailey, p. 106. With
N.J.Zaluzec.
11. Annealing of Point Defects in Quenched NiAl, Phil. Mag. 32, 1975, p. 873. With M.H Loretto, R.E.
Smallman and R.J. Wasielewski.
12. Carbides in Alloys of Vanadium, Proc. 4th Int. Conf. On the Strength of Metals and Alloys, Nancy,
France, 2, 727, 1976. With C. Fleur and C.A. Wert.
13. Computer Simulation of Defect Images Using Scanning Transmission Electron Microscopy, Invited
paper for ITTRI/SEM, 1976, Toronto, pp.329-36, Ed. O. Johari, 1976. With I.P. Jones and M.H.
Loretto.
14. A modified Specimen Stage for X-ray Analysis in TEM, J. Phys. E. 9, 1976, pp. 1051-52. With N.J.
Zaluzec.
15. Microchemical Analysis of Thin Metal Foils, Proc. 34th Annual Meeting of EMSA, Miami Beach,
ed.G.W.Bailey, Claitor's Publ. Baton Rouge, LA, 1976, p. 420. With N.J. Zaluzec.
16. Imaging and Elemental Analysis of Defect Structures in STEM, Electron Microscopy, 1, (Proc. 6th
Europ. Cong. on Electron Microscopy, Jerusalem, 1976, Ed. D. Brandon, p. 180.
17. X-ray Absorption Effects in Thin Metals Foils, Proc. Workshop on Analytical Electron Microscopy,
Cornell Univ., Ithaca, NY, MSC Report #2763, 1976, pp. 118-120. With N.J. Zaluzec.
4

18. Examples of Microdiffraction Using the Stationary Diffraction Pattern Technique in STEM, Proc.
of AEM Workshop, Cornell Univ., MSC Report #2763, 1976, pp. 217-221. With N.J. Zaluzec.
19. Carbides in Alloys of V, 4th. Int. Conf. on Strength of Metals and Alloys, 1976, 2, 727. With
C.F.Fluhr and C.A.Wert.
20. Limiting Factors in Specimen Thickness in Conventional and Scanning Electron Microscopy, Phil.
Mag., 35, 1977, pp.159-76. With M.H. Loretto and I.P. Jones.
21. Comments on "Energy Dispersive X-ray Measurements of Thin Metal Foils," Scripta Met., 11,
1977, pp. 257-59. With N.J. Zaluzec.
22. Threshold Voltage for Damage in Si under Electron Bombardment, Scripta Met., 11, 1977, pp. 47-
49.
23. Solid-phase Crystallization of Si Films in Contact with Al Layers, JAP, 48, 1977, p.2897. With
I.D. Ward, C.A. Evans, R. Blattner, and J.M. Harris.
24. Recent Advances in Analytical Electron Microscopy, Proc. 14th Ann. Electron Microscopy
Colloquium, May 1977, Ames Lab., Iowa State Univ., Amer. Ed. F. Labs, p. 135.
25. Contamination and Absorption Effects in X-ray Microchemical Analysis of Thin Metal Films, Proc.
8th Int. Conference on X-ray Optics and Microanalysis, Ed. R. Ogilvie and D. Wittry, Boston, MA,
1977, p. 112. With N.J. Zaluzec.
26. Microstructural Observations of Metal Powders Using Analytical Electron Microscopy, Proc. Int.
Conf. on Rapid Solidification Processing, Principles and Technologies, Eds. R.Mehrabian, B.H.
Kear and M. Cohen, Reston, VA, 1977, p. 270. With R.D. Field.
27. Microstructural Observations of Metal Powders Using Analytical Electron Microscopy, Met. Trans.
A, 9A, 1978, p.131. With R.D. Field.
28. Elemental Analysis of Second Phase Carbides Using Electron Energy Loss Spectroscopy, 11th.
Ann Scanning Electron Microscopy Symp., 1, 1978, p.627.
29. Elemental Analysis in a V-Ti-C Alloy Using Electron Energy Loss Spectroscopy, Proc. 9th Int.
Cong. on Electron Microscopy, Toronto, 1978, ed. J.M.Sturgess, p.552.
30. An Analytical Electron Microscopy Study of the High Temperature Carbide Formed in a V-5Ti-C
Alloy, Met. Trans., 11A, 693, 1980. With S.M. Bruemmer, C.P. Fluhr, D.V.Beggs, and C.A. Wert.
31. Analytical Transmission Electron Microscopy on the 10nm Scale, Micron, 11, 1980, p.267
32. Analytical Transmission Electron Microscopy in Materials Science, Proc. 5th International
Symposium on "High Purity Materials in Science and Technology," Dresden, 1980, II, p. 238.
33. Microstructural Analysis of Rapidly Solidified Superalloy Powders, Proc. 2nd Int. Conf. on Rapid
Solidification Processing, Principles and Technologies, Reston, VA, March 1980. With R.D. Field
and E.H. Aigeltinger.
34. Microstructure of Rapidly Solidified Powders, Superalloys 1980, Proc. Int. Conf. on Superalloys,
Seven Springs, PA, 1980, ASM, ed. J.K.Tien, et al., p. 439. With R.D. Field and A.R. Cox.
35. STEM Analysis of Grain-Boundaries in Cemented Carbides, Journal of the American Ceramic
Society, 63 (3-4), pp. 194-196, 1980. With N.K. Sharma, I.D. Ward, and W.S. Williams.
36. Surface Melting of an Alloy under Steady State Conditions, Proc. AIME Conf. on Lasers in
Metallurgy (Chicago, IL, 1981) publ. TMS-AIME, K. Mukherjee and J. Mazumder, eds., 131, 1981.
With J.A. Sekhar and R. Mehrabian.
37. The Effect of Specimen Thickness on X-ray Profiles in STEM, Phil. Mag., 43, 1587, 1981. With
M.E.Twigg and M.H. Loretto.
38. Quantitative Energy-Disperse X-ray Analysis of Thin Foils with Pure Elemental Standards,
Analytical Electron Microscopy - 1981 ( R.H. Geiss, eds., San Francisco Press ), 61, 1981. With
J.M.Brown and M.H. Loretto.
39. Analytical Transmission Electron Microscopy in Minerals Processing, Process Minerology in
Extractive Metallurgy, Mineral exploitation, and Energy Resources, publ. TMS-AIME, 267, 1981.
With K.C.Hsieh and M.E. Twigg.
40. On the Validity of Monte Carlo Calculations for the Interpretation of X-ray Profiles in STEM,
Analytical Electron Microscopy - 1981 (R.H. Geiss, eds., San Francisco Press), 99, 1981. With M.E.
Twigg.
41. The Effect of Surface Layers on Thin Foil Standards on the Accuracy of Quantitative EDS
Claitor's Publ. Div., Baton Rouge, LA, p.484, 1982. With J.M. Brown.
5

42. Spatial Resolution of Stem and EDS in an Al-Ge Alloy, ibid., p. 490, 1982. With M.E. Twigg and
J.P. McCarthy.
43. Structure Determination of Ni 3 Mo Using Convergent Beam Electron Diffraction, SEM-82, p. 686,
1982. With M.J. Kaufman.
44. A Comparison of Two Models for the Characteristic Fluorescence Correction in Thin Foil Analysis,
Microbeam Analysis - 1982, ed., K.F.J. Heinrich, San Francisco Press, San Francisco, CA, p.37,
1982. With M.E. Twigg.
45. A Determination of Symmetry Changes in Ordered Alloys by Convergent Beam Electron
Diffraction, ibid., p.54, 1982.
46. Specimen Preparation Limitations in Quantitative Thin Foil Microanalysis, ibid., p. 93. With J.P.
McCarthy.
47. An Example of the Use of Combined Techniques of Analytical TEM for Phase Identification, ibid.,
p. 393, 1982. With D.G. Konitzer.
48. Microstructural Characterization of Rapidly Solidified Materials, Proc. 3rd Conference on Rapid
Solidification Processing; Principles and Technologies, NBS, Gaithersburg, MD, Dec. 1982, p.56.
With J.B.VanderSande.
49. A Technique for the Observation of Rapid Solidification and Annealing of Powders in a
Transmission Electron Microscopy, Scripta Met., 17, 141, 1983. With M.J. Kaufman
50. Analysis of In-Situ Rapid Solidification of Submicron Al-Ge Eutectic Powders Using Transmission
Electron Microscopy, Met.Trans. A, 14A, 623, 1983. With M.J. Kaufman.
51. Metastable Phase Formation in Rapidly Solidified Submicron Powders of Al-30.3at.% Ge Eutectic
Alloy, Materials Science and Engineering, 57, 117, 1983. With M.J. Kaufman.
52. Formation and Thermal Stability of an Oxide Dispersion in a Rapidly Solidified Ti-Er Alloy,
Scripta Met., 17, 963, 1983. With D.G. Konitzer and B.C. Muddle.
53. Microstructure of Rapidly Solidified Aluminum Alloys, Proceedings: Materials Research Society,
Annual Meeting, Symposium F, Boston, MA, Nov. 14-17, 1983, p.317. With J.W. Zindel, J.T.
Stanley and R.D. Field.
54. Dynamic Compaction of Al Alloys, Proceedings: Materials Research Society,Annual Meeting,
Symposium F, Boston, MA, Nov. 14-17, 1983, p.163. With J.W. Sears and B.C. Muddle.
55. A Study of a Cellular Phase Transformation in the Ternary Ni-Al-Mo Alloy System, Met. Trans.,
14A, 1561, 1983. With M.J. Kaufman, M.H. Loretto and J.A. Eades.
56. A Comparison of the Microstructures of As-Cast and Laser Surface Melted Ti-8Al-4Y, Met. Trans.,
14A, 1979, 1983. With D.G. Konitzer and B.C. Muddle.
57. Applications of Convergent Beam Electron Diffraction to Ni-base Superalloys, J.Microsc.
Spectrosc. Elec., 8, 1983, p.431
58. A Comparison of Two Models for the Characteristic X-ray Fluorescence Correction in Thin Foil
Analysis, J. Microsc., 1984, 133, 61. With M.E. Twigg.
59. A Microanalytical Study of Secondary Precipitation in RSR 143 Using Atom Probe Field Ion
Microscopy and Analytical Transmission Electron Microscopy, "Superalloys 1984", ed. M. Gell,
C.S. Kortovich, R.H. Bricknell, W.B. Kent and J.F. Radavich, Met. Soc. AIME, 1984, p.633. With
M.E. Twigg, A.I. Melmed, R. Klein and M.J. Kaufman.
60. Rapidly Solidified Prealloyed Powders by Laser Spin Atomization, Met. Trans., 15B, 1984, 149.
With K.W. Walters, E.C. Heiser and D .G. Konitzer.
61. The Annealing of Vacancy Defects in β-NiAl I: Vacancy Loop Growth in As-Grown Single
Crystals, Phil. Mag., 50, 89, 1984. With A. Parthasarathi.
62. The Annealing of Vacancy Defects in β-NiAl II: The Role of Surface Oxidation on Vacancy Loop
Growth in Slowly Cooled Crystals, Phil. Mag., 50, 101, 1984. With A. Parthasarathi.
63. Refined Dispersions of Rare Earth Oxides in Ti-Al Alloys Produced by Rapid Solidification,
Proceedings of the Fifth International Conf. on Titanium, Munich, 1984, 1, p.405. With D.G.
Konitzer, B.C. Muddle, and R.Kirchheim.
64. The Production of Ultrafine Dispersions of Rare Earth Oxides in Ti Alloys Using Rapid
Solidification, Proceedings of the Fifth International Conference on Rapidly Quenched Metals,
1984, 1, 953. With D.G. Konitzer, B.C. Muddle and R. Kirchheim.
6

65. Oxide Dispersions in Rapidly Solidified Ti Alloys, in "Rapidly Solidified Metastable Materials", ed.
B.H. Kear and W.C. Giessen, Mat. Res. Soc. Symp. Proc., 28, 1984, Elsevier Sci. Publ. Co., p. 381.
With D.G. Konitzer and R. Kirchheim.
66. Rapid Solidification and Dynamic Compaction of Ni-base Superalloy Powders, "Superalloys 1984",
ed. M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent and J.F. Radavich, Met. Soc. AIME, 1984,
p.487. With R.D. Field, S.J. Hales and W.O. Powers.
67. Microstructural Comparison of Rapidly Solidified Al-Base Powders Produced by Laser Surface
Melting, Melt-Spinning and Atomization, Proceedings: International Powder Metallurgy
Conference, Toronto, Ontario, June 17-22, 1984, p.455. With J.W. Zindel, J.T. Stanley and R.D.
Field.
68. Microstructure of Some Rapidly Solidified Al-Base Alloys, Proceedings: Fifth International Conf.
on Rapidly Quenched Metals, Wurzburg, W. Germany, Sept. 3-7 1984, p.941. With M.J. Kaufman,
J.T. Stanley, D.C. Van Aken and R.D. Field.
69. Microstructural Analysis of Rapid Solidification and Undercooling in the Al-Ge System, Mat. Res.
Soc. Symp. Proc., 28, 1984, Elsevier Sci. Publ. Co., p. 335. With M.J. Kaufman.
70. Precipitates in a Rapidly Solidified Al-Mn Alloy Possessing Icosahedral Symmetry, Mat. Sci. &
Eng., 68, L17, 1984-85. With R.D. Field.
71. The Importance of Undercooling in the Formation of Non-Equilibrium Structures in the Al-Ge
Alloy System, Int. Journal of Rapid Solidification, 1, 27, 1984-85. With M.J. Kaufman.
72. Driving Force for Discontinuous Coarsening in a Ni-Al-Mo Base Superalloy, Met. Trans A, 16A,
11. With A.W.Funkenbusch, T.A.Stephenson, and G. McCarthy.
73. Characterization of Metastable Crystalline Phases in the Al-Ge Alloy System, Acta Met., 33, 191,
1985. With M.J. Kaufman.
74. The Detection of Local Strains in Strained Layer Superlattices, Inst. Phys. Conf. Ser. No. 76,
Section 7, Microsc. Semicond. Mater. Conf., Oxford 1985, p. 307. With D.M. Maher, C.J.
Humphreys, C.J.D. Hetherington, R.V. Knoell and J.C. Bean.
75. The Microstructure of Rapidly Solidified Hyper-Eutectic Al-Be Alloys, Acta Met., 33, 963, 1985.
With D.C. Van Aken.
76. The Production and Thermal Stability of A Refined Dispersion of Er 2 O 3 in Ti 3 Al Using Rapid
Solidification Processing, Mat. Res. Soc. Symp. Proc., 39, p.437, 1985. With D.G. Konitzer.
77. Convergent Beam Electron Diffraction and Imaging of Strained Layer Superlattices, EMAG '85,
Inst. Phys. Conf. Ser. No. 78, Chapter 2, Newcastle Upon Tyne, p. 49. With D.M. Maher, C.J.
Humphreys, R.V. Knoell, J.B.Woodhouse and J.C. Bean.
78. Convergent-Beam Diffraction in the Characterization of Crystalline Phases, MRS Publ. "Materials
Problem Solving with the Transmission Electron Microscope", 1986, p.143. With J.A Eades and
M.J.Kaufman.
79. The Use of Convergent Beam Electron Diffraction to Determine Local Lattice Distortions in Nibase
Superalloys, Phil. Mag., 54 (1), p.79, 1986. With M.J. Kaufman and D.D. Pearson.
80. Dynamic Compaction of Al Alloys, in "Rapidly Solidified Al Alloys", ASTM STP 890, 1986,
p.304. With J.W. Sears and D.J. Miller.
81. Rapid Solidification and Subsequent Analysis of Some Hypereutectic Al-base Alloys, in "Rapidly
Solidified Al Alloys", ASTM STP 890, 1986, p.186. With J.W. Zindel, J.T. Stanley and R.D. Field.
82. The Nature of Dispersed Phases in Ti-0.7at%Er Prepared by Rapid Solidification Processing, Acta
Met., 34(7), p.1269, 1986. With D.G. Konitzer, J.T. Stanley, and M.H. Loretto.
83. An Analytical Electron Microscopy Study of the Recently Reported "Ti 2 Al Phase" in γ−ΤiΑl
Alloys, Scripta Met., 20, p. 103, 1986. With M.J. Kaufman, D.G. Konitzer, and R.D. Shull.
84. Constitution of an Al-37-5Ge Splat Quenched Foil: Implications on Nucleation Kinetics, Scripta
Met., 20, p.125, 1986. With M.J. Kaufman and M. Ellner.
85. Site Occupancy in Solid Solutions of Nb in the Intermetallic Compounds TiAl and Ti 3 Al, Scripta
Met., 20, p. 265, 1986. With D.G. Konitzer and I.P. Jones.
86. The Intercellular Phase in Rapidly Solidified Alloys Based on the Al-Fe System, Scripta Met., 20, p.
415, 1986. With J.W.Zindel and R.D.Field.
87. Undercooling and Microstructural Evolution in Glass Forming Alloys, Hume-Rothery Memorial
Symposium, ( 1986: New Orleans, LA), Undercooled Alloy Phases, Ed. E.W. Collings and C.C.
Koch, TMS-AIME, Warrendale, PA, 1986, p.249. With M.J. Kaufman.
7

88. Nucleation in the Presence of a Metastable Liquid Miscibility Gap in the Aluminum Beryllium
System, Hume-Rothery Memorial Symposium, 1986: New Orleans, LA), Undercooled Alloy
Phases, Ed. E.W. Collings and C.C. Koch, TMS-AIME, Warrendale, PA, 1986, p.413. With D.C.
Van Aken.
89. Microstructures and Properties of Rapidly Solidified Al-Fe-(Mo/Ce) Alloys, in "Aluminum Alloys:
Their Physical and Mechanical Properties", E.A. Starke, Jr. and J.H. Sanders, Jr. Eds., Chameleon
Press, Ltd., London, 1986, p. 279. With J.W. Zindel, R.D. Field, P. Kurath.
90. Mechanical Properties of Rapidly Solidified Al-4Be Alloys, in "Aluminum Alloys: Their Physical
and Mechanical Properties", E.A. Starke, Jr. and J.H. Sanders, Jr. Eds., Chameleon Press, Ltd.,
London, 1986, p. 295. With D.C. Van Aken, P. Kurath.
91. The Formation of Microstructures in Rapidly Solidified Hypereutectic Al Alloys Containing Ni or
Co, in "Aluminum Alloys: Their Physical and Mechanical Properties", E.A. Starke, Jr. and J.H.
Sanders, Jr. Eds., Chameleon Press, Ltd., London, 1986, p.307. With J.T. Stanley, R.D. Field.
92. Rapid Solidification of Al Alloys, in "Aluminum Alloys: Their Physical and Mechanical
Properties", E.A. Starke, Jr. and J.H. Sanders, Jr. Eds., Chameleon Press, Ltd., London, 1986,
p.1321.
93. Laser Surface Melting of Ti Alloys Containing Er or La, in "Titanium: Rapid Solidification
Technology", F.H. Froes and D. Eylon Eds., TMS-AIME, Warrendale, PA, 1986, p. 165. With S.A.
Court, J.T. Stanley, D.G. Konitzer, M.H. Loretto.
94. Rapid Solidification Studies in Eutectoid Forming Ti Alloys, in "Titanium: Rapid Solidification
Technology", F.H. Froes and D. Eylon Eds., TMS-AIME, Warrendale, PA, 1986, p. 211. With L.S.
Chumbley M.A. Ohls.
95. Dislocations in Nb-Containing Ti 3 Al, in "Titanium: Rapid Solidification Technology", F.H. Froes
and D. Eylon Eds., TMS-AIME, Warrendale, PA, 1986, p. 249. With S.A. Court, S.A. Skewes,
M.H. Loretto.
96. Rapidly Solidified Ti Alloy Powders, in "Titanium: Rapid Solidification Technology", F.H. Froes
and D. Eylon Eds., TMS-AIME, Warrendale, PA, 1986, p. 77. With J.P.A. Lofvander, S.A. Court,
R. Wheeler, J.W. Sears, D.A. Watson.
97. Structure and Magnetism of Quasicrystalline and Crystalline Al1-xMnx Alloys, Phys. Rev. B, 1986,
34, 2960. With S.E.Youngquist, P.F.Miceli, D.G.Wiesler and H.Zabel.
98. Detection and Measurement of Local Distortions in a Semiconductor Layered Structure by
Convergent-Beam Electron Diffraction, Appl. Phys. Lett., 50, 1987, p. 574. With D.M. Maher, C.J.
Humphreys, R.V. Knoell and J.C. Bean.
99. Convergent Beam Electron Diffraction at Medium Voltages, Analytical Electron Microscopy -
1987, ed. D.C.Joy, San Francisco Press, p. 173. With V.K.Vasudevan.
100. Heteroepitaxial Strains and Interface Structure of Ge-Si Alloy Layers on Si (100), Inst. Phys. Conf.
Ser. No. 87:section 2, 1987, p. 165. With E.P.Kvam, D.J.Eaglesham, C.J.Humphreys, D.M.Maher
and J.C.Bean.
101. Metastable Phase Production and Transformation in Al-Ge Alloy Films by Rapid Crystallization
and Annealing Treatment, Acta. Met., 35, 1987, p.1181. With M.J. Kaufman, and J.E.Cunningham,
Jr..
102. The Thermal Stability of a Refined Dispersion of Erbia Particles in Rapidly Solidified Ti-Er and Ti-
Al-Er Alloys, in "Processing of Structural Metals by Rapid Solidification", ed. F.H.Froes and
S.J.Savage, ASM, Metals Park, 1987, p. 231. With J.P.A. Lofvander, S.A. Court, R. Kirchheim,
D.G. Konitzer.
103. Microstructure and Properties of Rapidly Solidified Magnesium Lithium Alloys, in "Processing of
Structural Metals by Rapid Solidification", ed. F.H.Froes and S.J.Savage, ASM, Metals Park, 1987,
p. 429. With F.C. Grensing.
104. Microstructure and Properties of Rapidly Solidified Material Consolidated by Dynamic
Compaction and Hot Isostatic Pressing, in "Processing of Structural Metals by Rapid Solidification",
ed. F.H.Froes and S.J.Savage, ASM, Metals Park, 1987, p. 133. With D.J. Miller and J.W.Sears.
105. The Production of Rapidly Solidified Ti Alloy Powders, in "Processing of Structural Metals by
Rapid Solidification", ed. F.H.Froes and S.J.Savage, ASM, Metals Park, 1987, p. 223. With
J.W.Sears, J.P.A.Lofvander, R.Wheeler, D.J.Miller and S.A.Court.
8

106. Thermal Stability of Rare-Earth Oxides in Ti When Annealed Above the α/β Transus, Scripta Met.,
21,1987, p.859. With J.P.A. Löfvander, S.A. Court, R.Kirchheim and H.L. Fraser.
107. Dislocations in As-Cast and Deformed Samples of Ti 3 Al and Ti-25Al-4Nb, Scripta Met., 21, 1987,
p.997. With S.A. Court and M.H. Loretto.
108. Identification of Precipitates in Rapidly Solidified and Heat-Treated Al-8Fe-2Mo-Si Alloys, Scripta
Met., 21, 1987, p.1105. With V.K. Vasudevan.
109. Microstructure of Rapidly Solidified Magnesium-Silicon Alloys, Scripta Met., 21, 1987, p.963.
With F.C. Grensing.
110. The Effect of Liquid Phase Separation on the Microstructure of Rapidly Solidified Titanium Rare-
Earth Alloys, Mat. Sci. and Eng., 1988, 98, 243. With S.A. Court J.W. Sears and M.H.Loretto.
111. Structure and Properties of Rapidly Solidified Mg-Si Alloys, Mat. Sci. and Eng., 1988, 98, 313.
With F.C.Grensing.
112. The Microstructures of Rapidly Solidified and Heat-Treated Al-8Fe-2Mo-Si Alloys, Mat. Sci. and
Eng., 1988, 98, 131. With V.K. Vasudevan.
113. The Crystallography of the Precipitation of Ti 5 Si 3 in Ti-Si Alloys, Acta. Met., 1988, 36(6), 299.
With L.S. Chumbley and B.C. Muddle.
114. Theoretical and Experimental Determinations of the Thermal Stability of Rare Earth Oxide
Particles in Rapidly Solidified Titanium Alloys, Acta. Met., 1988, 36(6), 1595. With D.G. Konitzer,
J.P.A. Lofvander, S.A. Court and R. Kirchheim.
115. The Microstructure of Rapidly Solidified and Heat-Treated Ti Alloys Containing La, Acta. Met.,
1988, 36(6), 1585. With S.A. Court, J.T.Stanley, D.G. Konitzer and M.H. Loretto.
116. Monotectic Solidification in RS Al-In Alloys, Int. J. of Rapid Solid.,1988, 3, 199. With D.C. Van
Aken.
117. Investigation of the Techniques for Measuring Lattice Mismatch in a Rhenium Containing Nickel-
Based Superalloy, Acta. Met., 1988, 36(6), 1309. With D.F. Lahrman, R.D. Field and R.Darolia.
118. The Relevance of Local Lattice Parameter Measurements using CBED, Proc. 46th. Ann. Meeting of
EMSA, ed. G.W.Bailey, 1988, p.1006.
119. Electron Microscopy Studies in Rapid Solidification Processing, Inst. Phys. Conf. Ser. No. 93, 1988,
2, 185.
120. Convergent-Beam Imaging (CBIM) - A Transmission Electron Microscopy Technique for
Investigating Small Localized Distortions in Crystals, Phil. Mag., 1988, 58,787. With C.J.
Humphreys, D.M. Maher, and D.J. Eaglesham.
121. CBED and CBIM from Semiconductors and Superconductors, Ultramicroscopy, 1988, 26, 13. With
C.J. Humphreys, D.J. Eaglesham, and D.M. Maher.
122. The Microstructures of Rapidly Solidified Titanium Aluminide-Based Alloys Produced by
Centrifugal Atomization, Proceedings of the Sixth World Conference on Titanium, Cannes, France,
June 1988, p. 1115. With J.W.Sears, J.P.A.Löfvander, R.Wheeler, M.A.Stucke and S.A.Court.
123. The Plastic Deformation of Ti3Al Deformed at Room Temperature, 300°C and 650°C, Proceedings
of the Sixth World Conference on Titanium, Cannes, France, June 1988, p. 949. With
J.P.A.Löfvander, P.Kurath and S.A.Court.
124. Phase Transformations in Ti Alloys, Proceedings of the Sixth World Conference on Titanium,
Cannes, France, June 1988, p. 1469. With N.Paton.
125. Deformation in Alpha-2 Titanium Alloys, Proceedings of the Sixth World Conference on Titanium,
Cannes, France, June 1988, p. 955. With B.J.Marquardt, G.K.Scarr, J.C.Chesnutt, and C.G.Rhodes.
126. A Microstructural Comparison of Melt Spun and Laser Surface Melted Aluminum-Molybdenum
Alloys, accepted for publication in Met Trans. A.. With F.C. Grensing.
127. The Effect of the α/β Phase Transition on the Stability of Rare-Earth Oxide Particles in Rapidly
Solidified Ti Alloys, Int. J. Rapid Solid., 1988, 4, 23. With J.P.A. Lofvander, S.A. Court, G.K.
Scarr, R.A. Amato and G.E. Wasielewski.
128. The Effect of the Alpha-Beta-Phase Transition on the Stability of Rare-Eearth-Oxide Particles in
Rapidly Solidified Ti Alloys. International Journal of Rapid Solidification. 4 (1-2): 23-26, 1988.
With J.P.A. Lofvander, S.A. Court, G.K. Scarr, R.A. Amato, and G.E. Wasielewski.
129. The Nature of c-Component Dislocations in Samples of Polycrystalline Ti3Al Deformed at Room
Temperature and 300°C, Phil. Mag., 1989, 59, 379. With S.A.Court, J.P.A. Löfvander and
M.H.Loretto.
9

130. Characterization of Metastable Phases in a Rapidly Solidified Nb-22Si Alloy, Acta Met., 1989, 37,
999. With D.J.Miller and J.W.Sears
131. Compositional Modulations in GexSi1-x Heteroepitaxial Layers, J. Vac. Sci Tech. B, 1989, 7, 210.
With D.M.Maher, R.V.Knoell, D.J.Eaglesham, C.J.Humphreys and J.C.Bean.
132. Tetragonal and Monoclinic Forms of Ge x Si 1-x Epitaxial Layers, Appl. Phys. Lett., 1989, 54, 222.
With D.J. Eaglesham, D.M. Maher, C.J. Humphreys and J.C. Bean
133. Strains and Misfit Dislocations at Interfaces, Proc. NATO Workshop on the Impact of Electron
Microscopy on Semiconducting Materials, 1988, in press. With C.J. Humphreys, D.J. Eaglesham,
D.M. Maher and I. Salisbury.
134. The Effect of Covalency on the Deformation Mechanisms in Intermetallic Compounds, 1989, Proc.
EMSA Ann. Meeting, San Antonio, TX, 316.
135. The Limits of Strain and Lattice Parameter Measurements by CBED, 1989, Proc. EMSA Ann.
Meeting, San Antonio, TX, 518.
136. The Mechanisms of Plastic Deformation of Rapidly Solidified Al3Ti and Al67Ni8Ti25
Intermetallic Compounds, 1989, Mat.Res.Soc.Symp. 133, 705. With V.K.Vasudevan and R.
Wheeler.
137. The Influence of Second Phase Ti3Al on the Deformation Mechanisms in TiAl, Phil. Mag. Letters,
1989, 59, 299. With V.K.Vasudevan, M.A.Stucke and S.A.Court.
138. The Identification of a Ti-Er-O Phase, Scripta metall., 1989, 23, 461. With J.P.A.Löfvander and
S.A.Court.
139. The Influence of Purity on the Mechanisms of Plastic Deformation of Ti3Al, Phil. Mag. Letters,
1989, 59, 289. With J.P.A.Löfvander, S.A.Court and P.Kurath.
140. Effect of Grain Size and Temperature on the Yield Stress of the Intermetallic Compound TiAl,
Scripta metall., 1989, 23, 467. With V.K.Vasudevan, S.A.Court and P. Kurath.
141. Effect of Purity on the Deformation Mechanisms in the Intermetallic Compound TiAl, Scripta
metall., 1989, 23, 907. With V.K.Vasudevan, S.A.Court and P. Kurath.
142. Oxidation Behavior of Some Mg-Li and Mg-Li-Si Alloys, Proc. Symp. on Light-weight Alloys for
Aerospace Applications, TMS Ann. Meeting, Las Vegas, NV, 1989. With S. Das.
143. Mobility of c-dislocations in Ti 3 Al. Philosophical Magazine Letters, 60(3): 111-116. Sept., 1989.
With J.P.A. Lofvander, S.A. Court, and M.H. Loretto.
144. Moiré Fringe Analysis of Small Precipitates in Melt-Spun Ti-Si Alloys, 1990, J. Elec. Microsc.
Techn., 14, 46. With L.S.Chumbley.
145. The Influence of Temperature and Alloying Additions on the Mechanisms of Plastic Deformation
of Ti3Al, Phil. Mag.A, 1990, 61, 109. With S.A.Court, J.P.A.Löfvander, and M.H.Loretto.
146. Deformation Mechanisms in the Intermetallic Compound TiAl, Phil. Mag.A, 1990, 61, 141. With
S.A.Court and V.K.Vasudevan.
147. On the Influence of Stoichiometry and Purity on the Deformation Mechanisms in the Intermetallic
Compound TiAl, 1990, Scripta Met., 24, 1105. With M.Aindow, K.Chaudhuri and S.Das.
148. Factors Influencing the Deformation Mechanisms in the Intermetallic Compounds Al3Ti and Al3V,
1990, Phil. Mag. Letts., 62, 143. With R. Wheeler and V.K.Vasudevan.
149. On the Shape of Edge-Dislocation Loops in β-NiAl, 1990, Phil. Mag. Letts., 62, 317. With M.
Aindow and A.Parthasarathi.
150. Compatibility of Potential Reinforcing Ceramics with Ni and Fe Aluminides, 1990,
Mat.Res.Soc.Symp. 194, 379. With J.A.Moser, M.Aindow, W.A.T.Clark, and S.Draper.
151. Metastable Phase and Defect Microstructures in Melt-Spun Ribbons of Nb3Al, 1991,
Mat.Res.Soc.Symp. 209, 89. With M.Aindow, J. Shyue, and T.A.Gaspar.
152. Extended Stacking Faults in Nb3Al, 1991, Inst. Phys. Conf. Ser. No. 119, EMAG 91, 249. With M.
Aindow, T.T. Cheng, R. Beanland, J. Shyue.
153. Concerning the Dissociation of Grown-in Dislocations in Melt Spun Ribbons of the Intermetallic
Compound Nb3Al, 1991, Phil. Mag. Letts, 64, 59. With M.Aindow, J. Shyue, and T.A.Gaspar.
154. A Comparative Study of the Nanocrystalline Material Produced by Sliding Wear and Inert Gas
Condensation, 1991, Mat. Res. Soc. Symp. Proc., 206, 593. With S.K.Ganapathi, M.Aindow, and
D.A.Rigney.
155. Metastable phases and defect microstructures in melt-spun ribbons of Nb 3 Al, Mat. Res. Soc. Symp.
Proc, 1991, 209, 89. With M. Aindow, J. Shyue, and T.A. Gaspar.
10

156. Internal Stresses in TiAl Based Lamellar Composites, 1992, Mat. Res. Soc. Symp. Proc., 273, 81.
With P.M.Hazzledine, B.K.Kad and D.M.Dimiduk.
157. A Microstructural Analysis of Dissimilar Solid State Welds in Advanced Materials, Edison
Welding Institute, Research Brief, November, 1992 with M.C. Juhas, W.A. Baeslack III, P.
Threadgill, and D.Phillips.
158. Interface Characteristics of Solid-Phase Welds Between Ti-6Al-2An-4Zr-2Mo-0.1Si and Ti-14Al-
21Nb Titanium Aluminides, Proc. 7th World Conference on Titanium, San Diego, Ca, June, 1992.
With M.C.Juhas, W.A Baeslack III, P. Threadgill, D. Phillips, and T.F. Broderick.
159. Interface Characteristics of Solid-State Welds in Titanium Aluminides, The Processing, Properties
and Applications of Metallic and Ceramic Materials, ed. M.H. Loretto and C.J. Beevers, Proc.
International Conf., Birmingham, U.K., September, 1992 with M.C. Juhas, K.H. Hou, W.A.
Baeslack III, P.L. Threadgill, and D. Phillips.
160. An Electron Microscopy Study of Inertia-Friction Welds in Ti-48Al-2Cr-2Nb, Conf. Proc., Trends
in Welding Research, Gatlinburg, June, 1992 with K.H.Hou, M.C. Juhas, W.A. Baeslack III and
D.L. Phillips.
161. On charge density determinations in intermetallics by quantitative convergent beam electron
diffraction, 1992, Matls. Sci. & Eng., A152, 237. With J.A. Horton, Z.L. Wang, R. Beanland.
162. Determining the Burgers Vectors of Decorated Dislocations in γ-TiAl by Diffraction Contrast and
CBED, 1992, Proceedings of 10th European Congress on Electron Microscopy, Granada
(EUREM'92), Vol. 1, 209. With J.M.K. Wiezorek, A.R. Preston, S.A. Court, and C.J. Humphreys.
163. The stability of B2 compounds in Ti-modified Nb-Al alloys, in High Temperature Ordered
Intermetallic Alloys V, edited by I. Baker, J.D. Whittenberger, R. Darolia, and M.H. Yoo, (Mater.
Res. Soc. Proc., 288, Pittsburgh, PA, 1992), p. 243 with J. Shyue, D.-H. Hou , S. Johnson, M.
Aindow.
164. Deformation mechanisms and mechanical properties in Ti-modified Nb-Al alloys, in High
Temperature Ordered Intermetallic Alloys V, edited by I. Baker, J.D. Whittenberger, R. Darolia,
and M.H. Yoo, (Mater. Res. Soc. Proc., 288, Pittsburgh, PA,1992), p.573. With J. Shyue, D.-H.
Hou, S. Johnson, and M. Aindow
165. Deformation mechanisms in the Intermetallic compound MoSi2, in High Temperature Ordered
Intermetallic Alloys V, edited by I. Baker, J.D. Whittenberger, R. Darolia, and M.H. Yoo, (Mater.
Res. Soc. Proc., 288, Pittsburgh, PA, 1992), p. 567. With D.J. Evans, S.A. Court, and P.M.
Hazzledine
166. Lamellar Interfaces and their Contribution to Plastic Flow Anisotropy in TiAl-based Alloys, in
High Temperature Ordered Intermetallic Alloys V, edited by I. Baker, J.D. Whittenberger, R.
Darolia, and M.H. Yoo, (Mater. Res. Soc. Proc., 288, Pittsburgh, PA,1992), p. 495. With B. Kad
and P.M. Hazzeldine.
167. Co-Continuous Alumina-Aluminum Composites Produced by Solid Displacement Reactions:
Processing, Structure, and Properties --16th Annual Conference on Composites, Materials and
Structures (Restricted Sessions), 1992. With M.C. Breslin and G.S. Daehn
168. Co-Continuous Alumina-Aluminum Composites for Heat Sinks and Substrates, ASM/TMS Fall
1992 Meeting. With M.C. Breslin and G.S. Daehn
169. Enhanced Decomposition of Rapidly Solidified Microstructures in Al-Fe-Mo and Ti-Al-Er Alloys
by Plastic Deformation and Applied Stress, 1993, Acta Metall. et Mater., 41, 73. With D.J.Miller.
170. Deformation Mechanisms in Intermetallic Compounds based on Nb3Al, Matls. Sci. and Eng., 1993,
A170, 1. With J. Shyue, D-H Hou, and M. Aindow
171. Dislocation dissociation in the Intermetallic compound MoSi2, Phil. Mag. Letts, 1993, 67, 331.
With D.J. Evans, S.A. Court, and P.M. Hazzledine
172. Applications of Co-Continuous Ceramic Composite Materials for Automotive Applications -- SAE
Technical Paper Series # 930184; International Congress and Exposition, 1993. With M.C. Breslin,
Liang Xu and G.S. Daehn
173. Co-Continuous Alumina-Aluminum Composites Produced by Solid/Liquid Displacement Reactions:
Processing, Structure, and Properties --17th Annual Conference on Composites, Materials, and
Structures (Restricted Sessions), 1993. With M.C. Breslin and G.S. Daehn
174. Measurement of Low Order Structure Factors in the Intermetallic Compound TiAl using the
Quantitative CBED method, (Invited), 1993, Edrs.: J. T. Armstrong, and J. R. Porter, Proceedings
11

of 27th Annual Microbeam Analysis Society (MAS) meeting, p. s218. With S. Swaminathan, I. P.
Jones, N. J. Zaluzec, and D. M. Maher
175. Measurement of Low Order Structure Factors in Intermetallic TiAl, 1993, Materials Science and
Engineering, A170, 227. with S. Swaminathan, I. P. Jones, N. J. Zaluzec, and D. M. Maher
176. Observations of

193. On the Mechanism of Transformation of γ-TiAl from α2-Ti3Al, 1994, Defect-Interface Interactions,
Mat. Res. Soc. Symp. Proc., 319, 311. With Bimal Kad and Peter Hazzledine.
194. Characterization of Solid-Phase Welds Between Ti-6A1-2Sn-4Zr-2Mo-0.1Si and Ti-13.5Al-21.5Nb
Titanium Aluminide. Materials Characterization, 33 (4): 357-367. Dec, 1994. With W.A. Baeslack,
T.F. Broderick, and M. Juhas.
195. Microstructural Characterization of Layered Interfaces in a Silicon Carbide Reinforced Titanium
Matrix Composite, 1995, Scripta metall. mater., 32, 1695. With J. Shyue and W.O. Soboyejo.
196. Processing, Microstructure, and Properties of Co-Continuous Alumina-Aluminum Composites,
1995, Materials Science and Engineering, A195, 113. With M.C. Breslin, J. Ringnalda, L. Xu, M.
Fuller, J. Seeger, G.S. Daehn, and T. Otani.
197. Resistivity of Titanium-Aluminum Multi-layered Thin Films, 1995, Thin Solid Films, 269, 29.
With R. Banerjee, R. Ahuja and S. Swaminathan
198. Elastic and Plastic Behavior of a Co-Continuous Alumina/Aluminum Composite, 1996, Acta metall.
mater., Vol. 44, No. 1, 249-261. With G.S. Daehn, B. Starck, L. Xu, K.F. Elfishawy, and J.
Ringnalda.
199. Scanning and Transmission Electron Microscopy on Composite Materials Prepared by SMP and Insitu
Displacive Reactions, 1995, Proc. EMAG, Institute of Physics, accepted for publication. With J.
Ringnalda, R. Wheeler, M.C. Breslin, H.J. Schmutzler and K.H. Sandhage.
200. A TEM Study of Dislocation Decoration in γ-TiAl, 1995, Proc. EMAG, Institute of Physics Conf.
Series No. 147, 515-519. With J.M.K. Wiezorek, G. Botton and C.J. Humphreys.
201. Factors Affecting the Accuracy of Structure Factor Measurements in TiAl, 1995, Proc. EMAG,
Institute of Physics Conf. Series No. 147, 133-136. With S. Swaminathan, J.M.K. Wiezorek, N.J.
Zaluzec, I.P. Jones and D.M. Maher.
202. The Ordering Tie Line Ananalysis - A New Approach to ALCHEMI, 1995, Proc. EMAG, Institute
of Physics Conf. Series No. 147, 39-42. With D-H Hou and I.P. Jones.
203. Recent Developments in Nb Aluminide Intermetallics, 1995, Proceedings of the TMS Fall 1995
meeting, Clevelend, OH, Oct. 29-Nov. 3, 1995 (in press) with D.-H. Hou and R. Wheeler.
204. Phase Evolution During Crystallization of Amorphous Titanium Aluminide Thin Films: Effect of
Mn and Nb Additions, 1995, Metastable Metal-based Phases and Microstructures, Mat. Res. Soc.
Symp. Proc., Vol. 400, 215-220. With R. Banerjee, S. Swaminathan and R. Wheeler.
205. The High Temperature Oxidation of Nb-40Ti-15Al and the Effect of Cr Alloying and Silicide
Diffussion Coatings, 1995, in High-Temperature Ordered Intermetallic Alloys VI, Mater. Res. Soc.
Proc. 364, p.1327. With B.V. Cockeram, H.J. Schmutzler, J. Shyue, K. Hoshino, S. Meng and R.
Wheeler.
206. Pseudo-Twinning in a Deformed Nb-15Al-25Ti B2 Alloy, 1995, in High-Temperature Ordered
Intermetallic Alloys VI, Mater. Res. Soc. Proc. 364, p.1359. With S.S. Yang, D.-H. Hou and R.
Wheeler.
207. Energy Filtered Diffraction Contrast Defect Imaging Using A Field Emission TEM, 1995,
Proceedings MSA 95, Kansas City, 166-167. With J.M.K. Wiezorek and S. Swaminathan.
208. Structure Factor Measurement in TiAl and Silicon, 1995, Proceedings MSA 95, Kansas City, 150-
151. With S. Swaminathan, J.M.K. Wiezorek, I.P. Jones, N.J. Zaluzec, D.M. Maher
209. Mullite Joining by the Oxidation of Malleable, Alkaline-Earth-Metal-Bearing Bonding Agents,
1996, J. Am. Ceram. Soc., Vol. 79, No. 7. 1839-1850. With K.H. Sandhage, H.J. Schmutzler, and R.
Wheeler.
210. Micro-Mechanism of Facture in Partially Lamellar TiAl, 1996, 8th World Titanium Conference,
Titanium 95, Birmingham, U.K., Vol. I, 144-15. With J.M.K. Wiezorek and P.M. DeLuca.
211. The Nature of the Interaction Between Interstitial Solute and Dislocations in TiAl, 1996, 8th World
Titanium Conference, Titanium 95, Birmingham, U.K. Vol. 1, 129-136. With J.M.K. Wiezorek.
212. The Ordering Tie-Line Method for Sublattice Occupancy in Intermetallic Compounds, 1996, Phil.
Mag., A74, 741. With D.H. Hou and I.P. Jones
213. Dimensionally Induced Structural Transformations in Titanium-Aluminum Multilayers, 1996, Phys.
Rev. Letts, 76, 3778. With R. Ahuja and R. Banerjee.
214. Crystallization of an Amorphous Phase in Sputter Deposited Ti-Al Alloy Thin Films, 1996, Metal.
& Matls. Trans., A27, 2047. With R. Banerjee, S. Swaminathan, J. M. K. Wiezorek and R. Wheeler.
13

215. Deformation Mechanisms in MoSi2 at Temperatures above the Brittle-Ductile Transition
Temperature. Part 2: Single Crystal MoSi2, 1997, Phil. Mag., 75, 17. With D. J. Evans, F. J.
Scheltens, and J. B. Woodhouse.
216. Inertia-Friction Welding of SiC-reinforced 8009 Aluminum, 1996, J. Matls. Sci., 31, 2149. With
T.J. Leinert, W.A. Baeslack III and J. Ringnalda.
217. Debye-Waller Factors in Off-Stoichiometric γ-Ti-Al: Effect of Ordering of Excess Al Atoms on Ti
Sites, 1996, Phil. Mag. Letts., 73, 319. With S. Swaminathan, I.P. Jones, D.M. Maher and A.W.S.
Johnson.
218. Mullite Joining by the Oxidation of Malleable, Alkaline-Earth-Metal-Bearing Bonding Agents.
Journal of the American Ceramic Society, 79 (7): 1839-1850. July 1996. With K.H. Sandhage, H.J.
Schmutzler, and R. Wheeler.
219. Elastic and Plastic Behavior of a Co-Continuous Alumina Aluminum Composite. Acta Materialia,
44 (1): 249-261. Jan 1996. With G.S. Daehn, B. Starck, L. Xu, K.F. Elfishawy, J. Ringnalda.
220. Effects of Debye-Waller Factors and Compositional Uncertainties on the 200 Structure Factor in γ-
TiAl. 1997, Phil. Mag. Letts., 75, 261. With S. Swaminathan, I.P. Jones, D.M. Maher and A.W.S.
Johnson.
221. The Ordering Scheme in Nb Aluminides with the B2 Crystal Structure, 1997, Scripta met. et mater.,
36, 617. With D-H Hou.
222. Development of a New Series of Nb Aluminides for Elevated Temperature Applications, 1996,
Processing and Design Issues in High Temperature Materials, proceedings of TMS conference in
Davos Switzerland, May 1996, 221-232. With S.S. Yang, D.-H. Hou and R. Wheeler.
223. Novel, Alkiline-Earth-Metal-Bearing Bonding Agents for Joining Ceramics Used at Elevated
Temperatures, 1996, The Journal of the American Ceramic Society, 1996, (in press). With K.H.
Sandhage, H.J. Schmutzler and R. Wheeler.
224. Structural and Phase Transformations in Thin Film Ti-Aluminides and Ti/Al Multilayers, Layered
Materials for Structural Applications, 1996, Mat. Res. Soc. Symp. Proc., Spring Meeting, 1996, (in
press). With R. Banerjee, S. Swaminathan and R. Wheeler.
225. Deformation Mechanisms and Strain Accommodation across lamellar Interfaces in a binary
Titanium Aluminum Alloy, 1996, ‘Deformation and Fracture of Ordered Intermetallic Materials III’,
TMS: Warrendale, PA, 77-87.,With J.M.K. Wiezorek and X.D. Zhang.
226. Microstructural Development in Laser and Electron Beam Welds on A356/SiC/15p, 1996,
'Processing, Properties and Applications of cast Metal Matrix Composites', Cincinnati, OH, TMS:
Warrendale, PA, 33-54. With T.J. Lienert, J.M.K. Wiezorek and W. A. Baeslack III.
227. Synthesis of Nanocomposite Thin Film Ti/Al Multilayers and Ti Aluminides, 1997, Mater. Res.
Soc. Symp. Proc., Symposium on Nanophase and Nanocomposites II, 457, 309. With R. Banerjee,
X.D. Zhang and S.A. Dregia.
228. Deformation Mechanisms at Intermediate Temperatures in a Nb Aluminide Compound, 1996,
Deformation and Fracture of Ordered Intermetallic Materials, proceedings of TMS Materials
Week,(in press). With R. Wheeler, S. Perungulam, D.-H. Hou and S.K. Banerjee.
229. Shear Transmission in Lamellar Ti-48at.%Al, 1997, Mater. Res. Soc. Symp. Proc., 460, 231-236.
With J.M.K. Wiezorek, X-D Zhang and W.A.T. Clark.
230. Mechanism for Tensile Yield Point Phenomenon and Serrated Yielding in Nb-40Ti-15Al, 1996,
Mater. Res. Soc. Symp. Proc., Symposium on High Temperature Ordered Intermetallics, MRS Fall
Metting, Boston, MA, December 1996 (in press). With S. Perungulam, R. Wheeler and D-H. Hou.
231. Precise and Accurate Refinements of the 220 Structure Factor in Si by the Systematic-row CBED
Method, 1997, Ultramicrscopy, 69, 169. With S. Swaminathan, S. Altynov, I.P. Jones, N.J. Zaluzec,
and D.M. Maher.
232. TEM Characterization of Planar Defects in a Massively Transformed TiAl-Alloy, 1997, Mater. Res.
Soc. Symp. Proc., 460, 213-218. With X-D Zhang, J. Wiezorek, M.J. Kaufman and M.H. Loretto.
233. HRTEM of Dislocations and Interfaces in TiAl, 1997, Mater. Res. Soc. Symp. Proc., 466, 131-138.
With M.J. Mills and J.M.K. Wiezorek.
234. Determining directly from Experiment the Magnitude of the Burgers Vector of -component
Dislocations in Ti3Al, 1997, Phil. Mag. Letts, Vol. 75, No. 5, 281-289. With J.M.K. Wiezorek and
C.J. Humphreys.
14

235. Defect Sub-Structures in Lamellar Ti-48Al after 'Hard' Orientation Loading at Room and Elevated
Temperature, 1997, 'Structural Intermetallics 1997', (TMS: Warrendale, PA), 195. With X.D.
Zhang and J.M.K. Wiezorek.
236. Observation of Ordered Ti3Al5 Precipitation in slightly Al-rich γ-TiAl, 1997, Microscopy and
Microanalysis, 3, Suppl. 2, 699. with S. Jayanthi, S. Swaminathan and J.M.K. Wiezorek.
237. Microstructural Characterization and Mechanical Behavior of Novel In-Situ Be-Al Composites,
1997, 'Light Weight Alloys for Aerospace Applications IV', (TMS: Warrendale, PA), 247. With
X.D. Zhang, G. Meyrick, F.C. Grensing and J.M.K. Wiezorek.
238. Characterization of α2-Precipitates in a (α/β) Titanium Alloy, 1997, 'Light Weight Alloys for
Aerospace Applications IV', (TMS: Warrendale, PA, 173. With X.D. Zhang, W.A. Baeslack III,
D.J. Evans and J.M.K. Wiezorek.
239. Deformation and Fracture Characteristics in TiAl at room temperature and 800°C, 1997, Matls. Sci.
and Eng. A 234-236, 1106-1109. With Jörg M. K. Wiezorek and Michael J. Mills.
240. Deformation Mechanisms in MoSi2 at Temperatures Above the Brittle-to-Ductile Transition
Temperature. 1.Polycrystalline MoSi2. Philosophical Magazine A-Physics of Condensed Matter
Structure Defects and Mechanical Properties. 75 (1): 1-15. Jan. 1997. With D.J. Evans, F.J.
Scheltens, and J.B. Woodhouse.
241. Activation of Slip in Lamellae of α2-Ti 3 Al in TiAl Alloys, 1998, Phil. Mag. A, 78, 217.With J.M.K.
Wiezorek, X.D. Zhang and W.A.T. Clark.
242. Interaction of Dislocations and Interstitial Solute in γ-TiAl, 1998, Phil. Mag.A, 77, No. 3, 661. With
J.M.K. Wiezorek.
243. Synthesis of BaAl2Si2O8 from Solid Ba-Al-Al2O3-SiO2 Precursors: II. TEM Analyses of Phase
Evolution, 1998, J. Am. Ceram. Soc..61(11), 2983. With X-D Zhang and K. Sandhage.
244. Synthesis of BaAl2Si2O8 from Solid Ba-Al-Al2O3-SiO2 Precursors: III. The structure of
BaAl2Si2O8 formed by annealing at 650 °C and at 1650 °C, 1998, J. Mat. Sci. Research, 13(11),
3122. With X-D Zhang and K. Sandhage.
245. Deformation Mechanisms in a Binary Ti-48Al Alloy with Lamellar Microstructure, 1997,
Philosophical Magazine Letters, Vol. 75, No. 5, 271-280. With Jörg M. K. Wiezorek, Paul DeLuca
and Michael J. Mills
246. Deformation Behavior of α 2 -Lamellae in Fully Lamellar Ti48Al-2Mn-2Nb at Room Temperature,
1998, Scripta Materialia, 38, 811. With J.M.K. Wiezorek, X-D. Zhang, A. Godfrey, D. Hu, and
M.H. Loretto.
247. Reaction between SiO 2 and Molten Aluminum, 1998, J. Japan Foundry Engineering Society, 70, 1.
With K. Hoshino, T. Sugiyama, T. Kurosawa and T. Otani.
248. Precipitation of Ordered α2-Phase in Ti-6-2222, 1998, Acta Materialia, 46(13), 4485, with
X.D. Zhang, W.A. Baeslack III, D.J. Evans and J.M.K. Wiezorek.
249. On the discontinuous yielding phenomena observed in a Nb-Ti-Al alloy, 1998, Intermetallics, 6(7-
8), 749. With R.J. Grylls, S. Banerjee, S. Perungulam, R. Wheeler.
250. Polymorphic Phase Stability in Thin Multilayers, 1998, Scripta Mater., 39, 217. With S.A. Dregia
and R. Banerjee.
251. Sublattice Occupancies in Ternary B2 Alloys, MRS Symp. Proc., MRS Fall Meeting (1998), with R.
Banerjee, S. Amancherla, and S. Banerjee
252. Interaction of Dislocations and Interstitial Solute in Gamma-TiAl. Philosophical Magazine A-
Physics of Condense dMatter Structure Defects and Mechanical Properties. 77 (3): 661-674. March,
1998. With J.M.K. Wiezorek.
253. Dimensionally induced structural transformations in titanium-aluminium multilayers - Reply, 1999,
Physical Review Letters, 82(9), 2003. With R. Banerjee, R. Ahuja.
254. Phase stability in Al/Ti multilayers, 1999, Acta Materialia, 47(4), 1153. With R. Banerjee, X.D.
Zhang, S.D. Dregia.
255. Stability of fcc Ti in Ti / Al Multilayers, 1999, Acta Mater. ,47(15), 4225. With R. Banerjee and S.
A. Dregia.
256. Planar Defects in massively transformed Ti-Al alloys, 1999, Philosophical Magazine Letters, 79(8),
519. With X.D. Zhang, J.M.K. Wizorek, M.J. Kaufman, M.H. Loretto.
257. On the stability of omega phase in Ti-6-22-22S and Ti-6-4 alloys, 1999, Scripta Materialia, 41(6),
659. With X.D. Zhang, J.M.K. Wizorek, W.A. Baeslack, D.J. Evans.
15

258. Optimizing the ALCHEMI Technique. Philosophical magazine A-Physics of Condensed Matter
Structure Defects and Mechanical Properties, 79 (10): 2525-2538. Oct 1999. With N. Jiang, D.H.
Hou, and I.P Jones.
259. Phase Evolution During Crystallization of Sputter Deposited Amorphous Ti-Al Alloy Thin Films ,
2000, Philos. Mag. A 80(8), 1715. With R. Banerjee, S. Swaminathan, R. Wheeler.
260. Microstructural Characterization of Novel In-Situ Al-Be Composites, 2000, Metall. Mater. Trans. A,
31(11), 2963. With X. D. Zhang, F. C. Grensing, F. Meisenkothen, J. M. K. Wiezorek, G. Meyrick,
261. Mechanisms of Plasticity and Fracture of Partially Lamellar Titanium Aluminum, 2000,
Intermetallics, 8(2), 99. With J. M. K. Wiezorek, P. M. Deluca, and H. L. Fraser.
262. Effect of stretching on the strength (Bauschinger effect) of Ti-6Al-2Cr-2Mo-2Zr alloy, 2000, J.
Advanced Mater., 32(1), 34. With X. D. Zhang, T. J. Ginter, B. Cornell, D. J. Evans.
263. Ordering in Ternary B2 Compounds, 2000, The International Journal of Refractory and Hard
Materials, 18, 245. With S. Amancherla, R. Banerjee, S. Banerjee.
264. Laser-deposited advanced materials, 2001, J. Advanced Mater., 33(1) 17. With X. D. Zhang, H.
Zhang, R. J. Grylls, T. J. Lienert, C. Brice.
265. Modeling of Site Occupancies in Ternary B2 Compounds in Nb-Ti-Al, 2001, Philos. Mag. A, 81(4),
777. With R. Banerjee, S. Amancherla, I. P. Jones, S. Banerjee.
266. Influence of Crystallographic Orientation and Layer Thickness on Fracture Behavior of Ni/Ni 3 Al
Multilayered Thin Films, 2001, Scripta Mater., 44(11), 2629. With R. Banerjee, J. P. Fain, P. M.
Anderson.
267. Direct Laser Deposition of Alloys From Elemental Powder Blends, 2001, Scripta Mater., 45(10),
1123. With K. I. Schwendner, R. Banerjee, P. C. Collins, C. A. Brice.
268. Characterization of Laser Deposited TiAl Alloys. Scripta Materialia, 44 (10): 2419-2424. May 2001.
With X.D. Zhang, C. Brice, D.W. Mahaffey, H. Zhang, K Schwendner, and D.J. Evans.
269. A Novel Radical Cyclization of 2-Bromoindoles. Synthesis of Hexahydropyrrolo[3,4-b]indoles.
Chemical Communications, (9): 805-806, 2001. With G.W. Gribble, and J.C. Badenock.
270. Characterization of Silicide Precipitates in Nb-Si and Nb-Ti-Si Alloys. Philosophical Magazine A.
81 (8): 1967-1978. Aug 2001. With R.J. Grylls, B.P. Bewlay, and H.A. Lipsitt.
271. Site Occupancies in B2 FeAl and NiAl Alloys with Ternary Additions, 2002, Acta Mater., 50(3),
633 With R. Banerjee, S. Amancherla, S. Banerjee.
272. Chemical Ordering and Texture in Sputter Deposited Ni 3 Al Thin Films, 2002, Acta Mater., 50(3),
643. With G. B. Thompson, R. Banerjee, X. D. Zhang, P. M. Anderson.
273. Phase Evolution in Laser Deposited Titanium-Chromium Alloys, 2002, Metall. and Mater. Trans. A,
33, 2129. With R. Banerjee and P. C. Collins.
274. Unexpected Nanoscale Phase Separation in Sputter Deposited Ni-25at%Al Thin Films, 2002,
Philos. Mag. Lett., 82(11), 623. With R. Banerjee, G. B. Thompson, and G. B. Viswanathan.
275. Laser Deposition of In Situ Ti – TiB Composites, 2002, Advanced Engineering Materials, 4(11),
847. With R. Banerjee and P. C. Collins.
276. Synthesis of single-walled carbon nanotubes in vibrationally non-equilibrium carbon-monoxide,
2002, Chem. Phys. Lett., 352(5-6), 342. With E. Plonjes, P. Palm, G. B. Viswanathan, V. V.
Subramaniam, I. V. Adamovich, W. R. Lempert, and J. W. Rich.
277. Modeling of Site Occupancies in B 2 FeAl and NiAl Alloys With Ternary Additions. Acta Materialia,
50 (3): 633-641. Feb 2002. With R. Banerjee, S. Amancherla, and S. Banerjee.
278. Effect of long-term aging on the microstructural stability and mechanical properties of Ti-6Al-2Cr-
2Mo-2Sn-2Zr alloy, 2003, Mater. Sci. Eng. A, 344 (1-2), 300. With X. D. Zhang, D. J. Evans, and
W. A. Baeslack.
279. Sputter deposited nanocrystalline Ni-25Al alloy thin films and Ni/Ni3Al multilayers, 2003, Thin
Solid Films, 424, 93. With R. Banerjee, G. B. Thompson, and P. M. Anderson.
280. Effect of heat treatment and silicon addition on the microstructure development of Ti-6Al-2Cr-
2Mo-2Sn-2Zr alloy, 2003, Mater. Sci. Eng. A, 343(1-2), 210. With X. D. Zhang, P. Bonniwell, W.
A. Baeslack, D. J. Evans, T. Ginter, T. Bayha, and B. Cornell.
281. Microstructural Evolution in Laser Deposited Ni-25at%Mo Alloy, 2003, Mater. Sci. and Engg. A,
347, 1. With R. Banerjee, C. A. Brice, and S. Banerjee.
16

282. Microstructural Evolution in Laser Deposited Compositionally Graded α/β Titanium-Vanadium
Alloys, 2003, Acta Mater, 51(11), 3277. With R. Banerjee, P. C. Collins, D. Bhattacharyya, and S.
Banerjee.
283. Microstructure, Magnetic, Transport, and Optical Properties of Ordered and Disordered Ni-25Al
Alloy Thin Films, 2003, Thin Solid Films, 441, 255. With R. Banerjee, P. Ayyub, G.B. Thompson,
R. Chandra, and P. Taneja.
284. Processing and Microstructural Characterization of Sputter-Deposited Ni/Ni3Al Multilayered Thin
Films, 2003, J. of Mater. Res.. 18(4), 979. With E. A. Sperling, R. Banerjee, G.B. Thompson, and
P.M. Anderson.
285. Lattice expansion in nanocrystalline Nb thin films, 2003, Appl. Phys. Lett. 82(24), 4250. With R.
Banerjee, E. A. Sperling, G. B. Thompson, S. Bose, and P. Ayyub.
286. Proximity effect in Nb/Zr multilayers with variable Nb/Zr ratio, 2003, Solid State Comm., 127, 349.
With R. Banerjee. P. Vasa, G. B. Thompson, and P. Ayyub.
287. Direct Laser Deposition of In Situ Ti-6Al-4V - TiB Composites, 2003, Mater. Sci. Eng. A. 358, 343.
With R. Banerjee, P. C. Collins, and A. Genc.
288. Microstructural Evolution in Laser Deposited Compositionally Graded α/β Titanium-Vanadium
Alloys, 2003, Acta Mater., 51(11), 3277. With R. Banerjee, P. C. Collins, D. Bhattacharyya and S.
Banerjee
289. Phase Stability of bcc Zr in Nb/Zr Thin Film Multilayers, 2003, Acta Mater., 51(18), 5285. With G.
B. Thompson, R. Banerjee, and S. A. Dregia
290. The role of crystallographic and geometrical relationships between alpha and beta phases in an
alpha/beta titanium alloy, 2003, Acta Mater., 51(16), 4679. With D. Bhattacharyya, G. B.
Viswanathan, R. Denkenberger and D. Furrer
291. Laser Deposition of Compositionally Graded Titanium-Vanadium and Titanium-Molybdenum
Alloys, 2003, Mater. Sci. and Eng. A, 352(1-2), 118. With P. C. Collins, R. Banerjee, and S.
Banerjee,
292. The influence of the enthalpy of mixing during the laser deposition of complex titanium alloys
using elemental blends, 2003, Scripta Mater., 48(10), 1445. With P. C. Collins, and R. Banerjee
293. Direct Laser Deposition of In Situ Metal Matrix Composites Based on Titanium Borides, 2003, to
appear in Titanium 2003: Proceedings of the Tenth World Conference on Titanium. With R.
Banerjee, P. C. Collins, A. Genc, and J. Tiley
294. Phase Transformations in Compositionally Graded Titanium Alloys, 2003, to appear in Titanium
2003: Proceedings of the Tenth World Conference on Titanium. With R. Banerjee, P. C. Collins, D.
Bhattacharyya, and S. Banerjee
295. Modeling the Relationships between Microstructural Parameters and the Tensile Properties in Ti-
6Al-4V using Neural Networks and Fuzzy Logic Models, 2003, to appear in Titanium 2003:
Proceedings of the Tenth World Conference on Titanium. With J. Tiley, R. Banerjee, T. Searles,
and S. Kar
296. A Combinatorial Approach to the Development of Neural Networks for the Prediction of
Composition / Microstructure / Property Relationships in α/β Ti Alloys, 2003, to appear in
Titanium 2003: Proceedings of the Tenth World Conference on Titanium. With P. C. Collins, S.
Connors, and R. Banerjee
297. The Effect of Heat Treatment on the Microstructure of Ti-5Al-5Mo-5V-3Cr-1Fe (Ti-555), 2003, to
appear in Titanium 2003: Proceedings of the Tenth World Conference on Titanium. With M. Harper,
R. Williams, G. B. Viswanathan, J. Tiley, R. Banerjee, and D. J. Evans
298. Tuning Phase Stability in Nanocomposite Multilayers, 2003, Appl. Phys. Lett., 83(17), 3471. With
G. B. Thompson, and R. Banerjee.
299. Characterization of the Ti-Al-Er Alloy Produced Via Direct Laser Deposition. Journal of Materials
Science, 38 (7): 1517-1521. Apr 2003. With C.A. Brice.
300. Strengthening Mechanisms in Ti-Nb-Zr-Ta and Ti-Mo-Zr-Fe Orthopaedic Alloys”, 2004,
Biomaterials, 25(17), 3413. With R. Banerjee, S. Nag, and J. Stechschulte.
301. Precipitation of Grain Boundary Alpha in a Laser Deposited Compositionally Graded Ti-8Al-xV
Alloy – an Orientation Microscopy Study, 2004, Acta Mater., 52, 377. With R. Banerjee, D.
Bhattacharyya, P. C. Collins, and G. B. Viswanathan.
17

302. Slip Transfer across Hetero-Interfaces in two-phase Titanium Aluminum Intermetallics, Mat. Res.
Soc. Symp. Proc. Vol. 819, 2004 Materials Research Society, San Francisco. With Jörg M.K.
Wiezorek, Xiao-Dong Zhang
303. Quantification of Microstructural Features in α/β Titanium Alloys, 2004, Mater. Sci. Eng. A.,
372(1-2), 191. With J. Tiley, T. Searles, E. Lee, S. Kar, R. Banerjee, and J. C. Russ.
304. Predicting Pseudomorphic Phases in Multilayers: Hexagonal Close Packed Nb in Nb/Zr, 2004, Appl.
Phys. Lett, 84(7), 1082. With G. B. Thompson and R. Banerjee
305. A Comparison of bcc Phase Stability in Zr/Nb and Ti/Nb Thin Film Multilayers, 2004, J. Mater.
Res., 19(3), 707. With G. B. Thompson, R. Banerjee, S. A. Dregia, and M. K. Miller
306. Comparison of Microstructural Evolution in Laser Deposited and Arc-Melted In Situ Ti – TiB
Composites, 2004, Metall. Mater. Trans. A, 35(7), 2143. With R. Banerjee, A. Genc, and P. C.
Collins
307. Compositionally graded materials by laser engineered net shaping (LENS), 2004, to appear in
Intermetallics. With P. C. Collins, G. B. Viswanathan, and R. Banerjee
308. A Comparison of Pseudomorphic bcc Phase Stability in Zr/Nb and Ti/Nb Thin Film Multilayers
(vol 19, pg 707, 2004). Journal of Materials Research, 19 (5): 1582-1590. May 2004. With G.B.
Thompson, R. Banerjee, S.A. Dregia, and M.K. Miller.
309. Strengthening Mechanisms in Ti-Nb-Zr-Ta and Ti-Mo-Zr-Fe Orthopaedic Alloys. Biomaterials, 25
(17): 3414-3419. Aug 2004. With R. Banerjee, S. Nag and J. Stechschulte.
310. Some Aspects of Atom Probe Specimen Preparation and Analysis of thin Film Materials.
Ultramicroscopy, 100(1-2): 25-34. July 2004.
311. A Comparison of Pseudomorphic bcc Phase Stability in Zr/Nb and Ti/Nb Thin Film Multilayers.
Journal of Materials Research, 19(3): 707-715. March 2004.
312. Microstructral Evolution and Strengthening Mechanisms in Ti-Nb-Zr-Ta, Ti-Mo-Zr-Fe and Ti-
15Mo Biocompatible Alloys. Materials Science and Engineering C- Biomimetic and
Supramolecular Systems, 25 (3): 357-362. May 2005. With S. Nag and R. Banerjee.
313. Comparison of Microstructural Evolution in Ti-Mo-Zr-Fe and Ti-15Mo Biocompatible Alloys.
Journal of Materials Science – Materials in Medicine, 16 (7): 679-685. July 2005. With S. Nag, R.
Banerjee, and J. Stechschulte.
314. Rapid Characterization of Titanium Microstructural Features for Specific Modelling of Mechanical
Properties. Measurement Science and Technology, 16 (1): 60-69. Jan 2005. With T. Searles, J. Tiles,
A. Tanner, R. Williams, B. Rollins, E. Lee, S. Kar, and R. Banerjee.
315. Formation of Equiaxed Alpha in TiB reinforced Ti Alloy Composites. Scripta Materialia, 52 (5):
387-392. Mar 2005. With D. Hill, R. Banerjee, D. Huber and J. Tiley.
316. Direct Observations and Analyses of Dislocation Substructures in the Alpha Phase of an
Alpha/Beta Ti-Alloy Formed by Nanoindentation. Acta Materialia, 53 (19): 5010-5115. Nov 2005.
With G.B. Viswanathan, E. Lee, D.M. Maher, and S. Banerjee.
317. Nanoscale TiB Precipitates in Laser Deposited Ti-Matrix Composites. Scripta Materialia, 53 (12):
1433-1437. Dec 2005. With R. Banerjee, A. Genc, D. Hill, and P.C. Collins.
318. Phase Transformation Textures in Ti-6Al-4V Alloy. Materials Science Forum: ICOTOM 14:
Textures of Materials, Pts 1 & 2, 495-497: 681-686, 2005. With S. C. Vogel, D. Bhattacharyya, G.
B. Viswanathan, and D. J. Williams.
319. Directs observations of Dislocation Substructures Formed by Nano-indentation of the Alpha-Phase
in an Alpha/Beta Titanium Alloy. Materials Science and Engineering A- Structural Materials
Properties Microstructure and Processing, 400: 463-466. July 2005. With G. B. Viswanathan, E.
Lee, D.M. Maher, and S. Banerjee.
320. A Novel Combinatorial Approach to the Development of Beta Titanium Alloys for Orthopaedic
Implants. Materials Science and Engineering C. 25 (3): 282-280. May 2005. With R. Banerjee and
S. Nag.
321. Predicting and Engineering Phase Stabilities in Nanoscale Multilayers. Transactions of the Indian
Institute of Metals, 58(6): 1027-1035. Dec 2005. With R. Banerjee.
322. A Study of the mechanism of Alpha to Beta Phase Transformation by Tracking Texture Evolution
with Temperature in Ti-6Al-4V Using Neutron Diffraction. Scripta Materialia, 54 (2): 231-236. Jan
2006. With D. Bhattacharyya, G.B. Viswanathan, S.C. Vogel, D.J. Williams, and V. Venkatesh.
18

323. Thermal Process Maps for Predicting Solidification Microstructure in Laser Fabrication of Thin-
Wall Structures. Journal of Materials Processing Technology, 178(1-3): 135-142. Sept 2006. With
S. Bontha, N.W. Klingbeil, and P.A. Kobryn.
324. Laser-Deposited Ti-Nb-Zr-Ta Orthopedic Alloys. Journal of Biomedical Materials Research Part A,
78A (2): 298-305. Aug 2006. With R. Banerjee, S. Nag, and S. Samuel.
325. Modeling the Tensile Properties in Beta-Processed Alpha/Beta Ti Alloys. Metallurgical and
Materials Transactions A, 37A (3): 559-566. March 2006. With S. Kar, T. Searles, E. Lee, G.B.
Viswanathan, J. Tiley and R. Banerjee.
326. Application of Micro-sample Testing to Study Fundamental Aspects of Plastic Flow. Scripta
Materialia, 54 (5): 759-764. March 2006. With M.D. Uchic, D.M. Dimiduk, R. Wheeler, and P.A.
Shade.
327. Size Induced Metal-Insulator Transition in Nanostructured Niobium Thin Films: Intra-Granular and
Inter Granular Contributions. Journal of Physics-Condensed Matter, 18 (19): 4553-4566. May 2006.
With S. Bose, R. Banerjee, A. Genc, P. Raychaudhuri, and P. Ayyub.
328. Structure of TiB Precipitates in Laser Deposited In-Situ, Ti-6Al-4V-TiB Composites. Materials
Letters, 60 (7): 859-863. Apr. 2006. With A. Genc, R. Banerjee, and D. Hill.
329. Design Tools for Structural Metallic Materials, Proceedings of Frontiers in the Design of Materials
(FDM-NMD-ATM), ed. B. Raj, S. Ranganathan, S. Mannon, K. Rao, M. Mathew, P. Shankar, pp.
19-30, Universities press, Madras, Chennai, 2006. With Collins, PC, Kar, S, Searles, T, Koduri, S,
Viswanathan, GB, Tiley, J, and Banerjee, R.
330. Selection of alpha variants during microstructural evolution in alpha/beta titanium alloy,
Philosophical Magazine 87 (24): 3615-3627 2007. With E. Lee, R. Banerjee, S. Kar, and D.
Bhattacharyya
331. Crystallographic and morphological relationships between beta phase and the Widmanstatten and
allotriomorphic alpha phase at special beta grain boundaries in an alpha/beta titanium alloy”, Acta
Mater., 55(20), 6765 (2007). With D. Bhattacharyya and G. B. Viswanathan
332. A novel combinatorial approach for understanding microstructural evolution and its relationship to
mechanical properties in metallic biomaterials, Acta Biomaterialia 3 (3): 369-376 MAY 2007. With
Nag S and Banerjee R.
333. Nanoscale Characterization of Elemental Partitioning between Gamma and Gamma Prime Phases
in Rene 88DT Nickel Base Superalloy, Metall. Mater. Trans. A, 40, 24 (2008). With J. Y. Hwang,
R. Banerjee, J. Tiley, R. Srinivasan, G. B. Viswanathan.
334. Coupling LEAP and HRSTEM to study the nanoscale structure and chemistry of interfaces,
Microsc. Microanal. 14 (S2), 376 (2008). With R. Srinivasan, A. Genc, R. Banerjee, J.Y. Hwang,
G.B. Viswanathan
335. Omega Assisted Nucleation and Growth of Alpha Precipitates in the Ti-5Al-5Mo-5V-3Cr-0.5Fe
Beta Titanium Alloy, Acta Mater., 57(7), 2136 (2009) With S. Nag, R. Banerjee, R. Srinivasan, J. Y.
Hwang. M. Harper
336. Elemental Partitioning between α and β Phases in the Ti-5Al-5Mo-5V-3Cr-0.5Fe (Ti-5553) Alloy,
Philos. Mag. A, 89(6), 535 (2009). With S. Nag, R. Banerjee, and A. Puthucode
337. Intra-granular Precipitation in Ti-Nb-Zr-Ta Biomedical Alloys, J. Mater. Sci., 44(3), 808 (2009).
With S. Nag, and R. Banerjee.
338. Application of X-ray and Neutron Diffraction to Determine Lattice Parameters and Precipitate
Volume Fractions in Low Misfit Nickel Base Superalloys”,Mater. Sci. Technol., 25(11), 1369,
(2009) With J. Tiley, R. Srinivasan, R. Banerjee, G. B. Viswanathan, B. Toby
339. Complementary techniques for the characterization of thin film Ti/Nb multilayers, Ultramicroscopy,
109(10), 1276 (2009). With A. Genc, R.Banerjee, G.B. Thompson, D.M. Maher, and A.W. Johnson
340. Compositional variations between different generations of γ’ precipitates forming during cooling of
a commercial nickel-base superalloy”, Metall. Mater. Trans. A, 40A(13), 3059 (2009). With J. Y.
Hwang, S. Nag, A. R. P. Singh, R. Srinivasan, J. Tiley, G. B. Viswanathan, and, R. Banerjee
341. Coarsening kinetics of γ’ precipitates in the nickel base superalloy Rene’ 88 DT”, Acta Mater. 57(8),
2538 (2009) With J. Tiley, G.B. Viswanathan, R. Srinivasan, R. Banerjee, and D.M. Dimiduk.
342. Atomic scale structure and chemical composition across order-disorder interfaces, Phys. Rev. Lett.,
102(8), 086101 (2009). With R. Srinivasan, R. Banerjee, G.B. Viswanathan, J. Tiley, and D.M.
Dimiduk
19

343. Effects of Process Variables and Size-Scale on Solidification Microstructure in Beam-Based
Fabrication of Bulky 3-D Structures, Mater. Sci. Eng. A, 513-514, p.311 (2009) With S. Bontha, N.
Klingbeil and P. Kobryn.
344. Electro-Thermal modeling of the thermal profile in ETMT specimens. With B. Peterson and P.
Collins. Submitted to MSE-A, - 2009
345. On the use of a sub-scale thermomechanical simulator to obtain accurate tensile properties of α+β−
and β-processed Ti-6Al-4V. Mater. Sci. Eng., 513-514, p. 357 (2009). With B. Peterson and P.
Collins.
346. Three Dimensional Morphology and Composition of Omega Precipitates in a Binary Titanium-
Molybdenum alloy, Scripta Mater., 61, 701 (2009). With A. Devaraj, R. Williams, S. Nag, R.
Srinivasan and R. Banerjee.
347. Orientation effect on recovery and recrystallization of cold-rolled niobium single crystals”, Mater.
Sci. Eng. A., 507, p.179 (2009) With R. Srinivasan, G.B. Viswanathan, and V. Levit.
348. Evolution of the γ/γ' interface width in a commercial nickel base superalloy studied by three
dimensional atom probe tomography, Scripta Mat., 61(1), 92 (2009) With J. Y. Hwang, S. Nag,
A.R.P. Singh, R. Srinivasan # , J. Tiley*, and, R. Banerjee. Accepted for publication
349. Control and elimination of nucleation-related defects in GaP/Si(001) heteroepitaxy, App. Phys.
Letts, 94, 232106 (2009) With T.J. Grassman, M.R. Brenner, S. Rajagoplalan, R. Unocic, R. Dehoff,
M. Mills, and S.Ringel.
20

INVITED PAPERS
1. "A Comparison of scanning Transmission Electron Microscopy and High Voltage Electron
Microscopy", Argonne National Laboratories, May 1974
2. "Glide and Climb of Dislocations in NiAl", Rockwell International Science Center, Thousand
Oaks, CA, February 1975.
3. "Hydride Precipitation in Refractory Metals", Carnegie-Mellon University, September 1975.
4. "Analytical Electron Microscopy", Stanford University, June 1976.
5. "Computer Simulation of Defect Images Using the Scanning Transmission Electron
Microscopy," ITTRI/SEM, June 1976, Toronto.
6. "Imaging and Elemental Analysis of Defect Structures in STEM," 6th European Congress on
Electron Microscopy, Jerusalem, Israel, September 1976.
7. "Analytical Electron Microscopy", Westinghouse Research Laboratories, Pittsburgh, PA,
December 1976.
8. "Analytical Electron Microscopy," AIME Winter Meeting in Atlanta, Georgia, March 1977.
9. "Recent Advance in Analytical Electron Microscopy," 14th Annual Electron Microscopy
Colloquim, Ames Lab , Iowa State University, May 1977.
10. "Microstructural Observations of Metal Powders Using Analytical Electron Microscopy,"
International Conference on "Rapid Solidification Processing Principles and Technologies,"
Reston, VA, November 1977.
11. "Analytical Electron Microscopy," Carnegie-Mellon University, April 1978.
12. "STEM and Its Application to Materials Science", Batelle Pacific Northwest Laboratories, June
1978.
13. "Analytical Electron Microscopy in Materials Science", Watson Research Center, IBM,
Yorktown Heights, NY, September 1978.
14. "Applications of STEM to Materials Science", General Electric Corporate Research and
Development Center, Schenectady, NY, September 1978.
15. "Analytical Electron Microscopy in Materials Science ", United Technologies Research Center,
East Hartford, CT, November 1978.
16. "Analytical Transmission Electron Microscopy on the 10nm Scale." The 6th Australian
Conference on Electron Microscopy, Monash University, Clayton, Vic., Australia, February
1980.
17. "Microstructural Analysis of Rapidly Solidified Superalloy Powder," second conference on
Rapid Solidification Processing, Principles and Technologies, Reston, VA, March 1980.
18. "Applications of STEM to Materials Science," Connecticut Section of AIME, Wallingford, CT,
April 1980.
19. "Analytical Transmission Electron Microscopy in Material Science," Plenary Lecture, 5th
International Symposium on "High Purity Materials in Science and Technology," Dresden, DDR,
May 1980.
20. "Analytical Transmission Electron Microscopy in Mineral Processing," Ann. Meeting of AIME,
Chicago, 1981.
21. "Analytical Electron Microscopy in RSP," DARPA Materials Research Council Meeting on
Rapid Solidification Technology, La Jolla, CA, 1981.
22. "Rapid Solidification Processing", Sangamon Valley Chapter of ASM, Decatur, IL,Nov. 1981.
23. "Quantitative Microchemical Analysis in AEM With and Without the Use of Standards,"
SEM/82, Anaheim, CA, April 1982.
24. "Microstructural Observations of Rapid Solidified Materials", NASA Lewis Research Center,
Cleveland, OH, May 1982.
25. "Specimen Preparation Limitations in Quantitative Thin Foil Microanalysis," EMSA/MAS
Meeting, Washington, DC, August 1982.
21

26. "Substitution for Chromium in Ni-base Superalloys using RSP", COSAM Workshop, NASA
Lewis Research Center, Cleveland, OH, October 1982.
27. "Microstructural Characterization of Rapidly Solidified Materials," 3rd Conf. on RSP: Principles
and Technologies, NBS, Gaithersburg, MD, December 1982. With J.B. Vander Sande.
28. "The Application of Convergent Beam Electron Diffraction to the Studies of Ni-base Alloys,"
Joint French-Belgian Electron Microscopy Societies Annual Meeting, Liege, Belgium, May
1983.
29. " Rapid Solidification Processing", General Motors Research Laboratories, Troy, MI, October
1983.
30. "Energy Dispersive X-ray Spectroscopy in Thin Foils," Workshop on AEM, Monash University,
Clayton, Vic., Australia, May 1984.
31. "Rapid Solidification of Aerospace Materials", Aeronautical Research Laboratories, Melbourne,
Australia, May 1984.
32. "Rapid Solidification Processing", Office National d'Etude et de Recherches Aerospatiale, Paris,
France, NATO consultant mission, May 1984.
33. Four Seminars at ONERA, Paris, On RSP of Ti alloys, Al alloys, Ni-base Superalloys and
Materials Processing Techniques, May 1984.
34. "Rapidly Solidified Ti Alloys", Max Planck Institut für Metallforschung, Institut für
Werkstoffwissenshaften, Stuttgart, FRG, May 1984.
35. "Microstructures and Morphologies of Rapidly Solidified Particulate," AIME Ann. Meeting,
New York City, Feb. 1985.
36. "Identification of Metastable Phases Using Convergent Beam Electron Diffraction," Electron
Microscopy Society of America, Ann. Meeting, Louisville, KY, August 1985.
37. "Intermediate Voltage Electron Microscopy," Electron Microscopy Society of America, Ann.
Meeting, Louisville, KY, August 1985
38. "Rapid Solidification and Processing of Powders," Int. Conf. on Al Alloys, June 1986,
Charlottesville, VA.
39. "Microstructural Characterization of RSP Materials," 4th Conference on Rapid Solidification
Processing: Principles and Technologies, December 1986, Santa Barbara, CA.
40. "Rapid Solidification Procesing of Ti Alloys", ALCOA Research Center, Feb. 1987.
41. "Rapid Solidification of Ti-Aluminides", Dept. of Metallurgy, University of Wisconsin
(Madison), April 1987.
42. "Convergent Beam Electron Diffraction at Intermediate Voltages", Microbeam Analysis Soc.
Ann. Meeting, Hawaii, July, 1987.
43. "The Physical Metallurgy of Ti-Aluminides", ALCOA Centenary Symposium, August 1987.
44. "Lattice Strain and Lattice Parameter Measurements in the Transmission Electron Microscope",
ASM-AIME Fall Meeting, Cincinnati, OH, October 1987
45. "Relationsip between Processing, Microstructure and Properties of Ti3Al", Los Alamos National
Lab., Jan. 1988
46. "Applications of Convergent Beam Electron Diffraction in Materials Science", Max-Planck
Institut für Metallforschung, Institut für Werkstoffwissenschaften, Stuttgart, BRD, March, 1988
47. "Rapid Solidification of Al and Mg Alloys", Max-Planck Institut für Metallforschung, Institut für
Werkstoffwissenschaften, Stuttgart, BRD, February, 1988. 18th., March (3rd. and 9th.), 1988
48. "Processing and Properties of Ti-Aluminides", Max-Planck Institut für Metallforschung, Institut
für Werkstoffwissenschaften, Stuttgart, BRD, March, 1988.
49. "Rapid Solidification Processing of Al, Mg and Ti Alloys", Centre de Recherche et
Developpement de Voreppe, Cegedur Pechiney, Pechiney Aluminium, Voreppe, France, April,
1988.
50. "Phase Transformations in Ti Alloys", 6th. World Conference on Ti Alloys, Cannes, France, July
1988. With N.Paton.
22

51. "The Relevance of Local Lattice Parameter Measurements using CBED", EMSA/MAS Annual
Meeting, Milwaukee, WI, August 1988
52. "Rapid Solidification", 9th. European Congress on Electron Microscopy, York, England, Sept.
1988
53. "Deformation Mechanisms in Ti3Al and TiAl", 1988 Titanium Aluminides Meeting,
AFWAL/Wright-Patterson AFB, Stratford, CT (Textron-Lycoming) November, 1988
54. "Deformation of Titanium Aluminides: A Question of Bonding", University of Liverpool,
Liverpool, UK, November, 1988
55. "Deformation of Titanium Aluminides and the Influence of Covalent Bonding", University of
Birmingham, Birmingham, UK, November, 1988
56. "Deformation of Titanium Aluminides: A Question of Bonding", Max-Planck Institut für
Metallforschung, Institut für Werkstoffwissenschaften, Stuttgart, BRD, presented in December,
1988.
57. "Processing and Deformation Mechanisms of Nb Aluminides", High Temperature Materials
Workshop, AFWAL, Materials Laboratory, Dayton, OH, December, 1988
58. "Processing and Deformation Behavior of Ti Aluminides", Department of Materials Science &
Engineering, University of Cincinnati, Cincinnati, OH, Feb. 1989
59. "Deformation Mechanisms and Ductility of Ti Aluminides", Department of Chemical
Engineering & Materials Sciences, University of Minnesota, Minneapolis, MN, Feb. 1989
60. "Characterisation of Metastable Microstructures", Indo-US Workshop on Metastable
Microstructures, to be held in Goa, India, March 1989
61. "Microdiffraction Studies in Materials Science Applications", Los Alamos National Laboratory,
Los Alamos, NM, March 1989
62. "Deformation Mechanisms in Ti Aluminides", Defence Metallurgical Research Laboratories,
Hyderabad, India, to be presented in April 1989
63. "Deformation of Titanium Aluminides: A Question of Bonding", University of Florida,
Gainesville, FL, April, 1989
64. "The Influence of Covalent Bonding on the Deformation Mechanisms and Ductilities of Ti-
Aluminides", ASM Pacific Northwest Materials Conference, Seattle, WA, May 1989
65. "Deformation Mechanisms in the Intermetallic Compounds Ti3Al and TiAl", University of
Washington, Seattle, WA, May 1989
66. "Deformation Mechanisms and Ductility of Ti-Aluminides", The Ohio State University,
Columbus, OH, May, 1989
67. "The Limits of Strain and Lattice Parameter Measurements by CBED", 47th. Ann. Meeting of
EMSA, San Antonio, August 1989
68. "Determination of Covalency and Its Effect on the Deformation Mechanisms in Intermetallic
Compounds", 47th. Ann. Meeting of EMSA, San Antonio, August 1989
69. "The Influence of Covalent Bonding on the Deformation Mechanisms and Ductilities of Ti-
Aluminides", University of Cincinnati, Cincinnati, OH, September 1989
70. "Deformation Mechanisms in High temperature Intermetallic Compounds", Case Western
Reserve University, Cleveland OH, September 1989
71. "Deformation Mechanisms in the Intermetallic Compounds TiAl and Ti3Al", University of
Liverpool, UK, November 1989
72. "The Influence of Covalent Bonding on the Deformation Mechanisms and Ductilities of Ti-
Aluminides", University of Birmingham, UK, November 1989
73. "Deformation Mechanisms in the Ti Aluminides", Alcan Banbury Laboratories, Banbury, UK,
December 1989
74. "The Influence of Covalent Bonding on the Deformation Mechanisms of Ti-Aluminides",
Department of Physics, The Ohio State University, Columbus OH, February 1990
23

75. "The Influence of Covalent Bonding on the Deformation Mechanisms and Ductilities of Ti-
Aluminides", Detroit Chapter of TMS, February 1990
76. "Deformation Mechanisms in Ti Aluminides", Symposium at ONERA, Paris, June 1990
77. "Factors Influencing the Deformation of Al3Ti", Symposium at ONERA, Paris, June 1990
78. "The Influence of Covalent Bonding on the Deformation Mechanisms and Ductilities of Ti-
Aluminides", Mitsubishi Materials Corp. Research Lab., Saitama, Japan, December 1990
79. "The Influence of Covalent Bonding on the Deformation Mechanisms and Ductilities of Ti-
Aluminides", Columbus Chapter of ASM, January 1991
80. "The Influence of Covalent Bonding on the Deformation Mechanisms of Ti-Aluminides",
Argonne National Lab., January 1991
81. "Characterization of Microcomposites and Nanophase Materials", ASM-AIME Spring Meeting,
New Orleans, LA, February 1991
82. "Recent Advances in High Temperature Materials", Ohio Academy of Sciences, Columbus, OH,
April 1991
83. "Applications of Convergent Beam Electron Diffraction in Materials Science", EMSORV/EMSA
Meeting, Cincinnati, OH, May 1991
84. "Processing, Microstructure, Properties and Performance of Ti, Fe and Nb Aluminide
Intermetallic Compounds", Euromat-91, Cambridge, UK, July 1991
85. "Charge Densities and Their Effect on Ductility Ti-Aluminides", TMS Fall Meeting, Cincinnati,
OH, October 1991
86. "Ductility in Intermetallics: Deformation Mechanisms in Ti and Nb Aluminides", Department of
Materials Science and Engineering, University of Cambridge, November 1991
87. "Ductility in Intermetallics: Deformation Mechanisms in Ti and Nb Aluminides", Department of
Materials Engineering, Purdue University, November 1991
88. "Interface Studies in Intermetallic Matrix Composites", MRS Fall Meeting, Boston, MA,
December 1991
89. "Microstructure and Fracture in Intermetallic Compounds", Gordon Conference, August 1992
90. "Structural Aspects of Intermetallic Compounds", IRC Conference on Advanced Materials,
Birmingham, UK, September, 1992
91. "Transformation of Ti3Al to TiAl in Ti-rich Ti-Al Alloys", PacRim Conference on Phase
Transformations, Kona, HA, December 1992
92. "Ductility in Intermetallics: Deformation Mechanisms in Ti and Nb Aluminides", US-Korea
Symposium on Advanced Materials, Seoul, Korea, December, 1992
93. “On the Experimental Determination of Low Order Structure Factors in Intermetallic TiAl by
Energy Filtered Convergent Beam Electron Diffraction”, (Invited), 1993, Proc. 51st Annual
meeting of the Microscopy Society of America (MSA), Eds.: G. W. Bailey and C. L. Rieder,
p.662. With S. Swaminathan, I. P. Jones, N. J. Zaluzec, and D. M. Maher
94. “Measurement of Low Order Structure Factors in the Intermetallic Compound TiAl using the
Quantitative CBED method”, (Invited), 1993, Edrs.: J. T. Armstrong, and J. R. Porter,
Proceedings of 27th Annual Microbeam Analysis Society (MAS) meeting, p. s218. With S.
Swaminathan, I. P. Jones, N. J. Zaluzec, and D. M. Maher
95. "Deformation Mechanisms in Ti and Nb Aluminides", Department of Materials Science and
Engineering, North Carolina State University, Raleigh, NC, April 1993
96. "Development of a Co-Continuous ceramic Composite", ONR/ARPA Annual Meeting on
Advanced Composites, Woods Hole, MA, June 1993
97. "Microstructure and Properties of an Al2O3 Co-Continuous Composite", ONR/ARPA Annual
Meeting on Advanced Composites, Woods Hole, MA, June 1994
98. "Processing and Microstructural Development of Co-Continuous Ceramic Composites",
University of Birmingham, Birmingham, UK. Dec. 1994
99. "Microstructure and Properties of Nb Aluminides", Cornell University, March 1995
24

100. "A Novel Intermetallic Compound and an Innovative Ceramic-based Composite", University of
Göttingen, Göttingen, Germany, March 1995
101. "Microstructure and Properties of a New Set of Intermetallic Compounds based on the Nb
Aluminides", Joint European Laboratory, Ispra, Italy, March 1995
102. "Materials Technology in the USA", University of Birmigham, April 1995
103. "Development of Nb-Based B2 Alloys for High Temperature Applications," TMS Fall Meeting,
Cleveland, OH, October 1995
104. "Processing and Microstructure/Property Relationships in NbAlTi Intermetallic Compounds,"
TMS Fall Meeting, Cleveland, OH, October 1995
105. "Processing and Properties of Co-Continuous Ceramic Composites," TMS Fall Meeting,
Cleveland, OH, October 1995
106. "Factors Affecting Ductility in Nb-based Aluminides", Internationaal Symposium on Advanced
Materials and Technology for the 21st Century, 117th meeting of the Japan Institute of Metals,
Honolulu, December 1995
107. "Ductile Nb Aluminide Intermetallic Compounds for High Temperature Applications", Annual
Meeting of the German Physical Society, Regensburg, March 1996
108. "Novel Nb Aluminides for Elevated Temperature Applications", Lehigh University, April 1996.
109. "Development of a New Series of Nb Aluminides for Elevated Temperature Applications",
Symposium on Processing & Design Issues in High Temperature Materials, Davos, Switzerland,
May 1996
110. "Determination of accurate low order structure factors in TiAl and (and Si) using energy filtered
CBED" Fifteenth Pfefferkorn conference on Electron Image and Signal Processing, May 18-22,
1996, Silver Bay, New York.
111. "Debye-Waller Factors and Sublattice ordering in TiAl", International Union of Crystallography,
XVII Congress and General Assembly, August 1996, Seattle, WA.
112. "The Effect of Solute Elements on the Crystallization of Amorphous Alloys based on TiAl", in
Symposium "Kinetically Determined Particle Shapes and the Dynamics of Solid:Solid
Interfaces", ASM Fall Meeting, Cincinnati, OH, October 1996
113. "Factors Affecting Ductility in Ordered Nb Aluminides Intermetallic Compounds", TMS Fall
Meeting, Cincinnati, OH, October 1996
114. "The Ordering State of Intermetallics: The Ordering Tie-Line", TMS/ASM Fall Meeting,
October 1996, Cincinnati, OH.
115. "Characterization of the Micro-Mechanisms of Transmission of Strain Across Inter-and
Intraphase Interfaces in Lamellar TiAl", TMS/ASM Fall Meeting, October 1996, Cincinnati, OH.
116. "Deformation Behavior of Ordered Nb-Ti-Al Alloys", TMS/ASM Fall Meeting, October 1996,
Cincinnati, OH.
117. "Development of Nb Aluminides for Structural Applications", Dayton Area Graduate Studies
Institute, September, 1996
118. "Recent Developments in Nb Aluminides for Structural Applications", Cincinnati Chapter of
ASM, October 1996, Cincinnati, OH.
119. "Development of Nb Aluminides for Structural Applications", Case Western Reserve University,
October 1996, Cleveland, OH.
120. "Recent Developments in High Temperature Intermetallic Compounds, Metallic Multilayers, and
Ceramic Composites", Technische Hochschule Darmstadt, October 1996, Darmstadt, Germany.
121. "The Ordered State of Alloyed Intermetallics: The Ordering Tie-Line", MRS Fall Meeting,
December 1996, Boston, MA.
122. "Relationship Between Interface and Dislocation Structure and the Mechanical Properties of
Metals and Intermetallics", MRS Fall Meeting, December 1996, Boston, MA.
123. "Structural Stabilities in Metallic Multilayers", Sandia National Laboratory, Livermore CA,
December, 1996.
25

124. "Serendipity and Planning in Research", Presidential Address to the Univerity of Birmingham
Metallurgical Society, Birmingham, UK, March 1997.
125. "Development of Nb Aluminides and Structural Stabilities in Metallic Multilayers", General
Electric, Corporate Research and development Laboratories, May 1997.
126. "Novel Nb Aluminides for Elevated Temperature Applications", Thermec 1997, July 1997
127. "Issues Involving Ductility, Toughness and Structural Stabilities in Intermetallics and
Multilayered High Temperature Materials", Conference on Computer Aided Design of High
Temperature Materials, Santa Fe, July 1997.
128. “Interface Properties and Phase Stabilities in Metallic Multilayers”, TMS Fall Meeting,
Indianopolis, September 1997.
129. "Structural Stabilities in Intermetallic Compounds and Multilayered Materials", Purdue
University, October, 1997
130. "Structural Stabilities in Multilayered Materials", Göttingen, October 1997
131. “Ductility, Toughness and Structural Stabilities in Intermetallics and Multilayered Materials”,
Cambridge University, Cambridge, UK, November 1997
132. “Processing and Properties of Advanced Nb-based Intermetallics”, PFAMVI, Singapore,
November 1997.
133. "Strengthening and Toughening Issues in Nb-Ti Based Intermetallics", TMS Annual Meeting,
San Antonio, February, 1998.
134. “The Interchange between Experimental and Computational Efforts in the Accelerated
Maturation of Materials”, Mardi Gras Conference, Baton Rouge, LA, February 1998.
135. “Microstructure and Mechanical Behavior of Nb Aluminides”, 3rd. International Workshop on
Ordered Intermetallic Alloys and Composites, HangZhou, PRC, April 1998.
136. “Ordering, Deformation Mechanisms, and Oxidation of B2 Nb-based Aluminides”, Kyoto
Workshop on High-Temperature Intermetallics, Kyoto, Japan, May 1998.
137. “Understanding Alloying Addirions to TiAl”, Workshop on TiAl, COST 513, Neuchâtel,
Switzerland, June 1998.
138. “Co-Continuous Ceramic Composites”, Robert Bosch Company, Stuttgart, Germany, July 1998.
139. “The Ordered State of Materials”, Rosemont TMS, Oct. 1998.
140. “Development of B2 Niobium Aluminides and Structural Stability and Deformation of Metallic
and Intermetallic Multilayered Materials”, Schenectady ASM/TMS Local Chapter, November,
1998.
141. “Overview of CAMM”, KAPL, November, 1998.
142. “Dislocation Interactions and Deformation Mechanisms in Two-Phase Alloys based on TiAl”,
TMS Annual Meeting, San Diego, February 1999.
143. “Physical Metallurgy of Ti Alloys”, Ladish Corporation, May 1999.
144. “Deformation Mechanisms in TiAl and Development of B2 Niobium Aluminides”, Oak Ridge
National Laboratory, May, 1999.
145. “Ordered States and Phase Transitions in Intermetallics and Thin Metallic Films”, IAC-2, Davos,
August, 1999.
146. “The Role of Interfaces in the Deformation of Titanium Aluminides”, International Workshop on
Grain Boundaries, Birmingham, September, 1999.
147. “Accelerated Maturation of P/M Light Materials”, TMS Fall Meeting, Cincinnati, November,
1999.
148. “Advanced Intermetallics and Refractory Alloys”, BARC, Mumbai, India Nov. 1999
149. “HREM Characterization of Slip Transmission in Lamellar TiAl”, TMS Annual Meeting,
February, 2000.
150. “Use Of Elemental Powder Blends in the Formation of Complex Alloys using LENS, TMS
Annual Meeting, February, 2000.
151. “Phase Transitions in Metallic Multilayers”, TMS Annual Meeting, February, 2000.
26

152. “Predicting the Behavior of Ti Alloys and Metallic Multilayered Materials”, Department of
Mechanical Engineering, Hong Kong University, May, 2000.
153. “Revolutionary Manufacturing & Design: Metallic Materials”, 2015 Future Threat Technologies
Symposium, Central Intelligent Agency, Langley, VA, August 4th, 2000
154. “A Combinatorial Approach to Developing Property/Microstructure Relationships in Titanium
Alloys”, TMS Annual Meeting, February, 2002
155. “The Accelerated Maturation of Micro- and Nano-Scaled Metallic Materials”, Department of
Materials Science and Engineering, University of Michigan, Ann Arbor, MI, April, 2002.
156. “Mechanical Property Model Development for Wrought Titanium Alloys”, Aeromat Conference,
Orlando, FL, June 2002
157. “The Accelerated Maturation of Metallic Materials”, CSIRO, Clayton, VIC, Australia, August,
2002
158. “Nano Materials in Gas Turbine Engines”, Nano Materials for Aerospace, Corpus Christi, Texas,
January 27-30, 2003
159. “Integration of Modeling and Characterization”, USAF Workshop on Integrated Modeling and
Microstructure, Freiburg, Germany, May, 2003
160. “Phase Stabilities in Nanoscale Metallic Multilayers”, Einer Vorlesung zu Ehre des
Besondersgeburtstages von Herren Dr. Prof. Reiner Kirchheim, University of Göttingen. July 4 th ,
2003
161. “The Accelerated Maturation of Micro- and Nano-Scaled Metallic Materials”, Department of
Materials Science and Engineering, Georgia Technology Institute of Technology, Atlanta, GA,
October, 2003
162. “FIB Applications”, Institut für Materialphysik, Göttingen University, Germany, February, 2004
163. “Three-dimensional Characterization of Microstructures”, USAF Workshop on Integrated
Modeling and Microstructure, Freiburg, Germany, May, 2004
164. “Application of FIB-Tomography to the Study of Microstructures in Titanium Alloys”,
Microscopy and Microanalysis, Savannah, GA August 2004
165. “3-D Materials Characterization using Dual-Beam FIB/SEM Techniques”, Microscopy and
Microanalysis, Savannah, GA August 2004
166. “The Accelerated Maturation of Micro- and Nano-Scaled Metallic Materials”, Institute for Metal
Research, Shenyang, China, July, 2004
167. “Engineering the Alpha2 Phase Morphology in TiAl Based Alloys”, IRC International Workshop
on Ti Aluminides, University of Birmingham, UK, July, 2004
168. “Prediction of Microstructure/Property Relationships in Ti Alloys”, ASM MS&T, Pittsburgh, PA,
October 2004
169. “Predicting Microstructure/Property Relationships in Ti Alloys”, GE Global Research Center,
Bangalore, India, December, 2004
170. “Luddites' Approach to Predicting Mechanical Properties of Lobster”, USAF Workshop on
Integrated Modeling and Microstructure, Freiburg, Germany, May, 2005
171. “Center for the Accelerated Maturation of Materials”, FEI Company, Acht, Eindhoven,
Netherlands, June, 2005
172. “A Combinatorial Approach to the Elemental Optimization of a Beta Titanium Alloy Using
Directed Lased Deposition”, Aeromat Conference, Orlando, FL, June 2005
173. “Exploiting a New Generation of Electron Microscopy”, Seminar, Melbourne, Australia, July,
2005
174. “Three-Dimensional Reconstruction of Alpha Laths in α/β Titanium Alloys by Serial Sectioning
with a Dual Beam FIB”, MS&T 2005, Pittsburgh, PA, October 2005
175. “Design Tools for structural Metallic Materials”, Frontiers in Materials Design, Chennai, India,
November14-18 th , 2005
27

176. “Developing Computational Tools for Predicting Properties of Ti Alloys”, International
Conference on Advanced Materials Design and Development, Goa, India, 14-16 th December,
2005
177. “The Importance of Observing in Two Dimensions but Realizing in Three Dimensions”, In
celebration of the awarding of the Ernst Abbe Award to John Russ, Eastern Analytical
Symposium of the New York Microscopical Society, November, 2006
178. “The Accelerated Maturation of Micro- and Nano-Scaled Metallic Materials”, INMETRO, Rio
de Janeiro, Brazil, January 2006
179. “Integration of Materials Characterization with Modeling and Simulation for the Development of
Computational Tools for the Design of Materials”, National Synchrotron Laboratory, Campinas,
Brazil, January, 2006
180. “Design Tools for Predicting Microstructure/Property Relationships in Ti Alloys”, TMS Annual
Meeting, San Antonio, TX, 15th March, 2006
181. “New Research Tools for the Prediction of Microstructure/Property Relationships in Ti Alloys”,
Institut für Materialphysik, Göttingen University, Germany, May, 2006
182. “Modeling the Mechanical Behavior of Titanium Alloys and predicting the Phase Stability in
Metallic Nano-scaled Multilayers”, Institute for Metal Research, Shenyang, China, May, 2006
183. “Modeling the Interrelationship between Microstructure and Properties of Titanium Alloys”
International Conference on Aerospace Materials, Beijing. June 2006
184. “Stimulating Interest in Materials Science and Engineering in Secondary and Tertiary
Education”, ” International Conference on Aerospace Materials, Beijing. June 2006
185. “Modeling the Interrelationships between Microstructure and Property in Ti Alloys”,
Department of Materials Science and Engineering, University of North Texas, Denton, TX,
October, 2006
186. “Predicting the Interrelationship between Microstructure and Properties in Ti Alloys and Phase
Stabilities in Nano-scaled Metallic Multilayers”, University of Queensland, Brisbane, Australia.
October 5 th , 2006
187. “Rapid Solidification Studies, Old and New”, Materials far from Equilibrium, BARC, Mumbai,
India, December 15-16 th , 2006
188. “New Research Tools for the Prediction of Microstructure/Property Relationships in Ti Alloys”,
ARC Centre of Ecellence in the Design of Light Alloys, Monash University, Clayton, VIC,
August 2006
189. “A Comparison of Quantification of Microstructural Features in α/β-Ti Alloys using Stereologybased
and Direct 3-D Characterization Techniques”, Materials Research Society Annual Meeting,
December, 2006
190. “The Use of a Dual-Beam FIB Instrument in Failure Analysis”, MS&T 2006, Cincinatti, OH,
October, 2006.
191. “Characterization of Complex Microstructures for Computer Simulation”, TMS Annual Meeting
2007, Orlando, FL, 27th February, 2007
192. “Progress in Materials Modeling and Some Future Needs” TMS Annual Meeting 2007, Orlando,
FL, 27th February, 2007
193. “Predicting the Relationship between Mechanical Properties and Microstructure of Ti Alloys and
Phase Stabilities in Metallic Multilayers”, Department of Materials Science and Engineering,
Iowa State University, Ames, IA, March, 2007
194. “Laser Deposition as a Combinatorial Method for Materials Development”, Optomec User
Group, UNT, 3rd April, 2007
195. “Predicting the Relationship between Mechanical Properties and Microstructure of Ti Alloys”,
Department of Materials Science and Engineering, University of Alabama, Tuscaloosa, April,
2007
196. “The Application of Bayesian Neural Network Modeling for the Prediction of Tensile and
28

Fatigue Properties in α/β Ti Alloys”, 11th World Conference on Titanium, Kyoto, Japan. June 3-
7, 2007
197. “Use of Dark-field STEM Imaging to Reveal Phase Separation in a β-Stabilized Titanium Alloy”,
Microscopy and Microanalysis, Fort Lauderdale, FL August 2007
198. “Integrated Characterization and Modeling of Ti Alloys”, Department of Materials Science and
Engineering, University of North Texas, 11th September, 2007
199. “Laser Deposited Functionally Graded Unitized Implants”, TMS MS&T 2007, Detroit, MI, 17th
September, 2007
200. “Nanotechnology Education”, A Hearing by the Subcommittee on Research and Science
Education, House Committee on Science and Technology, Washington, DC, 2 nd October, 2007
201. “Future Directions for Development of Electron Microscopy”, FEI Technology Conference,
Portland, OR, 13th November, 2007
202. “Accelerated Maturation of Materials: Integrating Computation and Characterization”,
ExxonMobil Research and Engineering Company, Annandale, NJ. November 27 th , 2007
203. “Development of New Ti Aluminides through Powder Processing: a Collaborative Activity
between the CoE and CAMM”, ARC Light Metals Workshop, Sydney. December 4-5 th , 2007
204. “Applications of Aberration-Corrected Electron Microscopy”, Titan Club, Eindhoven, The
Netherlands, 28th January, 2008
205. “Advances in Analytical Electron Microscopy”, Australian Electron Microscopy Society Annual
Meeting, Perth, Australia, 19th February, 2008
206. “The Direct 3-Dimensional Characterization and Digitization of Complex Microstructures in Ti-
Based Alloys across Length Scales”, TMS Annual Meeting, New Orleans, 10th March, 2008
207. “Novel Heat-Treatments for the Production of Refined Microstructures in α/β Ti Alloys”, TMS
Annual Meeting, New Orleans, 10th March, 2008
208. “Probing the Early Stages of Phase Separation and Second Phase Nucleation in Complex Beta
Titanium Alloys”, TMS Annual Meeting, New Orleans, 11th March, 2008
209. “On the Nucleation of Alpha-Ti in Alpha/Beta-Ti and Beta-Ti Alloys”, TMS Annual Meeting,
New Orleans, 12th March, 2008
210. “Specimen Preparation for Aberration-Corrected Electron Microscopy”, Workshop on the Limits
to Characterization and Modeling of Atomic Scale Processes and Defects, Bernkastel, Germany,
May 6th, 2008
211. “Advances in Characterization of Bio-materials”, Sri Ramachandra University, Chennai, India,
18th June, 2008
212. “Direct Three-Dimensional Microstructural Characterization and Reconstruction Across Varying
Length Scales in α/β Titanium Alloys by Serial Sectioning Using a FEI DualBeam(TM)
(FIB/SEM) and Robo-Met.3D”, Microscopy & Microanalysis 2008 Meeting, Albuquerque, NM,
August 4th, 2008
213. “Quantitative measurements of elemental intermixing in nanoscaled multilayers and other
stories”, Brazilian MRS Meeting, Guaruja, Brazil, 2nd October, 2008
214. “Laser Deposited Functionally Graded Orthopedic Implants”, TMS MS&T 2008, Pittsburgh, PA,
7th October, 2008
215. “On the Nucleation of α-Ti in α/β-Ti and β-Ti Alloys”, TMS Annual Meeting 2009 San
Francisco. February 16 th -19 th , 2009
216. “Maximizing the Spatial resolution of Compositional Analysis”, WISAT 2009, Mumbai, India,
23-25th February, 2009
217. “Applications using the Dual-Beam FIB”, WISAT 2009, Mumbai, India, 23-25th February, 2009
218. “High Resolution STEM and High Angle Annular Dark-Field Imaging”, WISAT 2009, Mumbai,
India, 23-25th February, 2009
219. “Ultra-High Resolution Characterization of Hybrid Interfaces in Nanoscaled Inorganic/Inorganic
and Inorganic/Organic Heterostructures”, Georgia Institute of Technology, 25th March, 2009
29

220. “The Use of Spatially-resolved and Monochromated EELS to Study Interfaces”, Worldwide
Titan Club Meeting, Eindhoven, The Netherlands, 8th April, 2009
221. “Limitations of Aberration-Corrected Electron Microscopy for the Study of Interfaces”, USAF
EOARD Bernkastel Workshop. May 2009
222. “Progress Towards Predicting the Interrelationships between Microstructure and Properties in Ti
Alloys”, Indian Institute of Materials Lecture and Defence Metallurgical Research Laboratory,
Hyderabad, India. September 23 rd , 2009
223. “Limits to High Spatial Resolution of EDS and EELS in an Aberration-Corrected (S)TEM”,
Frontiers of Electron Microscopy, Microanalysis and Spectroscopy, FEMMS2009, Huis ten
Bosch, Nagasaki, Japan. September 27 th -October 2 nd , 2009
224. “Phase Stabilities in Metallic Multilayers”, MS&T’09, Pittsburgh, PA. October 28 th , 2009
225. “Factors Affecting Elemental Quantification at the Atomic Scale using EDS and EELS”,
MS&T’09, Pittsburgh, PA. October 28 th , 2009
226. “Development of Neural Networks for the Assessment of the Interrelationships between
Microstructure and Properties of Ti Alloys”, ExxonMobil Research and Engineering Company,
Annandale, NJ. November 12 th , 2009
227. “Experimental and Computational Tools for the Digital Representation and Prediction of
Microstructure and its Incorporation in the Designer’s Knowledge Base”, GE Aviation, Evendale,
OH. December 3 rd , 2009
228. “Integration of Microstructural Characterization and Neural Networks for the Prediction of
Microstructure and Properties in Titanium Alloys”, Annual Workshop of the ARC Light Metals
Design Centre, Geelong, Australia. December 9-10 th , 2009
229. “University Activities in Additive Manufacturing”, EWI Additive Manufacturing Consortium
Meeting, Columbus, OH. February 11 th , 2010
230. “Ti Alloys by Design for Lighter, Stronger and Tougher Alloys - Modeling, Simulation and
Validation”, Boeing Workshop, Seattle, WA. February 18 th 2010
231. “Pushing to the Limits of Spatially Resolved Compositional Determinations in Aberration-
Corrected Scanning Transmission Electron Microscopy”, EMSI-2010, Mumbai, India. March 8-
10 th , 2010
232. “Towards Modeling the Mechanical Properties of Ti Alloys”, NIMS, Tsukuba, Japan. March 15 th ,
2010
30