1 C. SURYANARAYANA, Ph.D., FIMMM, FASM Professor ...

34
Mater. Res. Bull., 39 (2004) 465-474.
196. S.J. Hong and C. Suryanarayana
Mechanism of Low-Temperature θ-CuGa 2 Phase Formation in Cu-Ga Alloys by Mechanical
Alloying
J. Appl. Phys., 96 (2004) 6120-6126.
197. U. Patil, S.J. Hong, and C. Suryanarayana
An Unusual Phase Transformation during Mechanical Alloying of an Fe-based Bulk Metallic
Glass Composition
J. Alloys & Compounds, 389 (2005) 121-126.
198. S.J. Hong and C. Suryanarayana
Mechanical Properties and Fracture Behavior of an Ultrafine-Grained Al-20 Wt Pct Si Alloy
Metall. Mater. Trans., 36A (2005) 715-723.
199. S.J. Hong, C. Suryanarayana, and B.S. Chun
Structure and Properties of Rapidly Solidified and Mechanically Milled Nanostructured Al-Ni-
Mm Alloys
J. Metastable & Nanocryst. Mater., 24-25 (2005) 703-708.
200. S.J. Hong and C. Suryanarayana
Low Temperature Phase Formation in Mechanically Alloyed Cu-Ga Powders
J. Metastable & Nanocryst. Mater., 24-25 (2005) 193-196.
201. Y. Wang, C. Suryanarayana, and L. An
Phase Transformation in Nanometer-Sized γ-Alumina by Mechanical Milling
J. Amer. Ceram. Soc., 88 (2005) 780-783.
202. C. Suryanarayana
Recent Developments in Nanostructured Materials
Adv. Eng. Mater., 7 (2005) 983-992.
203. B. Prabhu, C. Suryanarayana, L. An, and R. Vaidyanathan
Synthesis and Characterization of High Volume Fraction Al-Al 2 O 3 Nanocomposite Powders by
High-Energy Milling
Mater. Sci. & Eng. A, A425 (2006) 192-200.
204. R.H. Chen, C. Suryanarayana, and M. Chaos
Combustion Characteristics of Mechanically Alloyed Ultrafine-Grained Al-Mg Powders
Adv. Eng. Mater., 8 (2006) 563-567.
205. S. Sharma, R. Vaidyanathan, and C. Suryanarayana
A Criterion for Predicting the Glass-Forming Ability of Alloys
Appl. Phys. Letters, 90 (2007) (in press).
206. C. Suryanarayana
Recent Developments in Mechanical Alloying
J. Alloys & Compounds, (2007) (in press).