SERVICE MANUAL - Philips
SERVICE MANUAL - Philips
SERVICE MANUAL - Philips
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. FUNCTION/TIMING INCANTO S-CLASS<br />
1. 2. Water system (Incanto classic, de luxe, sirius)<br />
Wassertank Water tank<br />
Thermal sensor<br />
Temp.sensor<br />
KTY KTY<br />
Schwimmer<br />
Wasserfilter Water filter<br />
Float<br />
Gear Getriebevor resistor<br />
-widerstand<br />
Wasserfilter Water filter<br />
Flow Flowmeter meter<br />
Pumpe Pump<br />
Überdruckventil Savety valve<br />
Boiler<br />
Durchlauferhitzer<br />
Heizung<br />
Heating<br />
1090 W<br />
1090W<br />
2x Thermostat<br />
2 Thermostate<br />
Pipe Rohrheizung heating<br />
Thermostat<br />
170ºC<br />
Heizung<br />
1090W<br />
1090 W<br />
Boiler Ventilzapfen pin<br />
HWS Valve<br />
HWD-Ventil<br />
To Brühgruppe brew unit<br />
Hot Heißwasser water / steam<br />
/ Dampf<br />
Component Function<br />
1 Water tank Water supply<br />
2 Water filter Water cleaned of solid matter (one or two depending)<br />
3 Flow meter Measure flow rate<br />
4 Pump Water flow/Pressure build-up<br />
(13 to 15 bar)<br />
5 Safety valve Protect boiler against overpressure (opens at 17 bar)<br />
6 Boiler (flow heating) Heats water to approx. 94°C<br />
(for brewing process)<br />
7 Sensor Transmits current temperature value to electronic<br />
system<br />
8 Thermostat Turns off flow supply to entire machine if overheating.<br />
9 Boiler pin (Valve plug) Opens when brewing unit is aligned with water circuit<br />
to the unit itself.<br />
10 Pipe heating Steams pre-heated boiler water for steam function.<br />
11 Thermostat (pipe heating) Switches (pulses) pipe heating<br />
12 HWS valve (tea nozzle) For hot water and steam dispensing<br />
Page 2/9 REV.1 FEB.2005 Saeco International Group