to download a copy of our Online Auction catalogue - Sanderson ...

On the instructions of P A Flint Esq. and B Green Esq. of KPMG LLP, 

the Joint Administrators of Metalbuild Ltd; and others 

Piecemeal 

(subject to Conditions of Sale and unless previously sold) 

MACHINE TOOLS, FABRICATION 

EQUIPMENT, WELDERS, 

CRANES, RESIDUAL STOCK 

AND MOTOR VEHICLES 

Photographs & timed online bids via www.bidspotter.co.uk 

Bidding closes: From 12 noon Thursday 25 March 2010 

View: 

At: 

From 9am to 4pm Tuesday 23 March 2010 or by appointment 

Lees Road, Knowsley Industrial Park, Liverpool, L33 7SA 

Brook House, 64-72 Spring Gardens, Manchester, M2 2BQ Tel: 0161 259 7000, Fax: 0161 259 

7007 

auctions@sandersonweatherall.com 

sandersonweatherall.com

GENERAL CONDITIONS OF SALE 

1. Interpretation 

1.1 In these General Conditions the following words and expressions shall have the meanings set opposite: 

“Auction” 

any auction conducted pursuant to these General Conditions. 

“Auctioneer” 

the person conducting the Auction or to whom the conduct of the Auction is delegated under clause 4.10 below. 

“Bidder” 

any person who offers to purchase any Lot whether by bidding at Auction/Online Auction or offering to purchase by private treaty or 

tender. 

“Bid” 

offer to purchase any Lot whether by bidding at Auction/ Online Auction or offering to 

purchase by private treaty or tender, and “Bids” and “Bidding” shall be construed accordingly. 

“Buyer” 

any person who agrees to purchase any Lot whether at Auction or by private treaty or tender. 

“Catalogue” 

the catalogue incorporating these General Conditions. 

“The Company” Sanderson Weatherall LLP (company number OC 344 770) 

whose registered office is at 25 Wellington Street Leeds LS1 4WG. 

“Location” 

the premises at which the Lots are located, details of which are set out in the Special Conditions. 

“Lot” 

any Lot described in the Catalogue or the Company’s invoice. 

“Seller” 

the person upon whose instructions the Company is conducting the sale, details of whom are set out in the Special Conditions. 

“Special Conditions” 

the Special Conditions set out or referred to in the Catalogue, announced at Auction or otherwise specified by the Company. 

2. Application of these General Conditions 

2.1 These General Conditions apply to every sale of plant and machinery, chattels and trade stocks conducted by the Company whether by Auction/ Online Auction, 

private treaty or tender including all Lots described in the Catalogue or the Company’s invoice. 

2.2 Bidding for any Lot shall be deemed to be an acceptance by the Bidder of these General Conditions and the Special Conditions. 

2.2 To the extent that these General Conditions are inconsistent with any Special Conditions, the Special Conditions shall prevail. 

2.4 These General Conditions, shall be governed construed and enforced in accordance with the laws of England and Wales unless the Location is in:- 

(1) Scotland in which case the laws of Scotland shall apply; or 

(2) Northern Ireland in which case the laws of Northern Ireland shall apply. 

3. Identity of the Parties 

3.1 The Company offers each Lot as agent of the Seller and not as principal unless otherwise indicated in the Catalogue. 

3.2 The identity of the Seller is set out in the Special Conditions. 

3.3 Unless the Company has previously acknowledged in writing that the Bidder Bids as agent on behalf of a named principal, every Bidder shall be taken to Bid on his 

own behalf as principal. 

3.4 Any Bidder acting as agent on behalf of a named principal shall remain liable to the Seller and the Company for all obligations and liabilities of his principal jointly 

and severally with the Principal. The Bidder warrants that he has the authority of his principal to make each Bid made. 

3.5 Every Bidder is required to give his name and address and provide satisfactory proof of identity to the Company before making any Bid. 

4. Conduct of Auctions 

4.1 Any Lot may be subject to a reserve price. 

4.2 The Seller or his representative or the Company on his behalf may Bid for any Lot. 

4.3 The Auctioneer may at any time before the fall of the hammer/ end of the timed online auction withdraw or divide any Lot or combine any Lots. 

4.4 The Company may sell any Lot by private sale before or after the Auction. 

4.5 The Auctioneer may reject any Bid at his sole discretion and without being required to give a reason. 

4.6 No Bid shall be retracted without the consent of the Auctioneer. 

4.7 The Buyer shall be the person who made the highest Bid before the fall of the hammer/ end of the timed online auction or such other Bidder as the Auctioneer may 

declare to be the Buyer without being required to give a reason. 

4.8 The Auctioneer may decide whether there is a dispute between Bidders, may summarily determine the dispute or immediately again offer the Lot for sale, in each 

case without being required to give a reason. 

4.9 The Auctioneer shall in every other respect decide how the Auction is to be conducted and without being required to give a reason. 

4.10 The Auctioneer may in his sole discretion delegate to a person whom he believes to be competent the conduct of the Auction in accordance with these General 

Conditions. 

4.11 The Buyer may not remove any Lot he has bought until after the end of the Auction. 

4.12 Sanderson Weatherall LLP will not be held liable (either by the vendor or prospective purchaser) in the event of any dispute due to errors, omissions or disruptions 

which may occur when bidding online 

5. Sale and Payment 

5.1 The Buyer shall pay the following sums to the Company in full and without set off:- 

(1) immediately upon the sale of any Lot a deposit of 10% of the price, if requested by the Company; 

(2) the balance of the price of the Lot purchased together with a Buyer’s Premium of 15% of the price and any VAT due by no later than the time and date specified in 

the Special Conditions; 

(3) any other payment or amount due to the Seller and/or the Company pursuant to these General Conditions or the Special Conditions on demand. 

5.2 In every case time for payment shall be of the essence. 

5.3 In view of Money Laundering Regulations the Company reserves the right to refuse payment in cash. Payments in cash of more than £7,000 will not, in any 

circumstances, be accepted. 

5.4 If the Buyer fails to make any payment on the due date for payment then, without limiting any other right or remedy available to the Seller, the Buyer shall pay to the 

Company interest (both before and after any judgment) on the amount unpaid at the rate of 1.5% per month or any part thereof until payment in full is made. 

5.5 Until the Buyer has fully complied with its obligations in this clause 5:- 

(1) title to any Lot bought shall not pass to the Buyer; 

(2) the Seller shall have a lien over any Lot bought by the Buyer in the Auction; 

(3) if the Buyer effects or purports to effect a resale or any other disposition of all or part of the Lot, the Buyer shall hold the proceeds of resale or other disposition on 

trust for the Seller. 

5.6 All prices are exclusive of any applicable value added tax for which the Buyer shall be additionally liable to pay to the Company. On written request by the Buyer the 

Company will provide a VAT invoice. 

6. Removal of Lots 

6.1 Risk of damage to or loss of the Lot shall pass to the Buyer immediately upon the sale being agreed, which, in the case of an Auction, is upon the fall of the 

hammer/ end of the timed online auction. 

6.2 The Buyer may not remove any Lot until the Buyer has:- 

(1) paid by cleared funds all amounts payable pursuant to clause 5 above in full; and 

(2) if requested by the Company produced evidence satisfactory to the Company that the Buyer has adequate public liability insurance in respect of the indemnity set 

out in General Condition 6.6 and/or deposited with the Company, by way of security for the costs of making good any damage likely to occur, such sum as the 

Company may stipulate. 

6.3 (1) The Buyer must remove each Lot purchased by the time and/or date specified in the Special Conditions for which time shall be of the essence. Lots may only be 

removed during normal working hours or such hours as are specified in the Special Conditions.

(2) Buyers should co-operate regarding order of removal in order to comply with the clearance date. If it transpires that a purchaser makes no effort to commence 

dismantling and the particular item of plant is preventing other buyers from removing equipment, then the Auctioneer reserves the right to insist that removal take 

place immediately notwithstanding the final clearance date. 

If in the event the purchaser does not comply, then the Auctioneer reserves the right to arrange for the removal and/ or storage of the lot or lots and charge any 

attendant costs to the purchaser. 

(3) If any lot or item is unsold and has to be dismantled & lowered to allow the removal of any other lot, then such dismantling & lowering shall be the responsibility of 

the Buyer of the relevant Lot(s) or Item(s). 

6.4 It is expressly brought to the Buyer’s attention that certain Lots could contain blue or white asbestos, dangerous chemicals etc which if not handled correctly during 

their removal could result in breach of Health & Safety at Work legislation and/or Control of Substances Hazardous to Health Regulations or other statutory 

requirements. 

6.5 When removing any Lot the Buyer:- 

(1) shall be responsible for detaching any Lot fixed to land or buildings and must do so safely and lawfully and must not use flame cutters, explosives or any other 

dangerous equipment or process without previous written permission signed by or on behalf of the Company; 

(2) Compliance with Laws, Regulations and Planning Purchasers or their Removal Contractors are responsible for applying for relevant planning permissions (if 

appropriate) with reference to the removal of building structures and plant housings. 

Purchasers or their Contractors shall at all times comply with all orders, regulations, requirements and rules of any authority whether Parliamentary, statutory, 

parochial or local and in particular shall comply with all requirements applicable to the employment by them of labour or otherwise affecting the work. The 

Purchasers or their Contractors shall in addition and without prejudice to the generality of the foregoing conform to the regulations and bye-laws of local authorities 

and shall pay all fees and charges arising under the said regulations and bye-laws in respect of the Work. 

It is the purchaser’s or their removal contractors responsibility (i.e. Police, Ministry of Transport, Local Authority) to transport off site long/wide loads, within sufficient 

time prior to the commencement of clearance period as stated in the Special Notes & Conditions. 

(3) must use safe and lawful means of removing the Lot, must comply with all current statutory requirements and regulations including those relating to the disposal of 

waste and, if required, satisfy the Company in relation to their removal procedures; in particular, the removal of waste materials must be undertaken by an approved 

and licensed contractor; 

(4) is responsible for ensuring that any motor vehicle may be safely and lawfully driven onto a public highway; 

6.6 The Buyer shall indemnify the Company and the Seller against any loss damages, expenses, claims or liabilities arising directly or indirectly from (a) the detaching 

of any Lot fixed to land or buildings and/or (b) its removal including (without prejudice to the generality of the foregoing) any damage caused to other Lots, the 

Location or to any third party and/or (c) possession or use of the Lot after ownership of the Lot has passed to the Buyer. 

7. Default by the Buyer 

7.1 If at any time the Buyer has failed to pay the sums specified in clause 5 above in full by the due date for payment, or to remove any Lot purchased by the time or 

date specified in the Special Conditions the Seller may (but is not obliged to) rescind the sale of that Lot, in which case any deposit shall be forfeit, and that Lot may 

be resold. 

7.2 If the Seller has rescinded the sale but the Buyer has removed the Lot purchased, the Seller shall be entitled without previous notice to enter upon any premises 

where he believes the Lot to be and remove it. 

7.3 If the Seller has rescinded the sale and the Lot has been resold, the Buyer shall make good any deficiency, namely:- 

(1) the sale price less the resale price; 

(2) the costs of and incidental to resale. 

7.4 If the Buyer fails to remove any Lot by the time specified:- 

(1) the Seller may remove the Lot from the Location and leave them outside at the Buyer’s risk in all respects; 

(2) the Seller may charge the Buyer for the reasonable costs of storage; 

(3) the Buyer shall indemnify the Seller against any loss, damages, expenses, claims or liabilities incurred by the Seller arising from the Buyer’s failure to remove the 

Lot from the Location. 

8. Acknowledgements and Exclusion of Warranties 

8.1 The Buyer acknowledges that in agreeing to purchase any Lot he is not relying on any warranties or representations made by the Seller or the Company or any of 

their employees agents or representatives. All representations, warranties and conditions, express or implied, statutory or otherwise in respect of all and any of the 

Lots are expressly excluded (without limitation any warranties and conditions as to title quiet possession, satisfactory quality fitness for purpose and description). 

8.2 The Buyer further acknowledges that neither the Sellers nor the Company shall in any circumstances be liable to or to compensate the Buyer nor shall the Buyer be 

entitled to rescind the sale or reject any Lot for an error omission or misstatement contained in the Catalogue. 

8.3 The Buyer also acknowledges that:- 

(1) all the Lots are purchased on the basis that risk of good title to all or any of them passing to the Buyer is at the Buyer’s risk and without limitation the Lots are sold 

subject to any claims, liens, distraint and execution and subject to all leasing, hire or hire purchase agreements and reservation of title claims (if any) in respect of 

them; 

(2) if it shall be found that the Seller does not have title to all or any of the Lots the Buyer shall have no right to rescind, avoid or vary this agreement or to claim 

damages or a reduction in the price paid or payable; and 

(3) anything found in under near or in any Lot which is not specifically included in the description of the Lot remains the property of the Seller. 

8.4 The Buyer undertakes that it shall ensure that any vehicle comprised in any Lot is in a roadworthy condition in accordance with the Road Vehicle (Construction and 

Use) Regulations 1986 before using it on a public road and the Buyer acknowledges that any item of plant, machinery or equipment contained in the Lot(s) may not 

necessarily comply with any statutory requirements or regulations governing the use of that plant, machinery or equipment in their working environment. Neither the 

Seller nor the Company shall incur any liability to the Buyer because of any default or defect in all or any of the Lots. Buyers are entirely responsible for ensuring 

that the use of any item of plant, machinery or equipment does not contravene any statutory requirements or regulations. 

8.5 The Buyer acknowledges and agrees that the Company is acting only as agent of the Seller and it is expressly agreed and declared that no personal liability in 

connection with the sale of any Lot or otherwise shall fall on the Company and the Buyer shall indemnify the Company against all and any liabilities arising under or 

in connection with the sale of any Lot. Whilst acting on the instructions of an Insolvency Practitioner, i.e. Administrative Receiver(s)/ Administrator(s)/ Liquidator(s) 

they act as agent for the Vendor without personal liability and shall incur no personal liability whatsoever in relation to this sale or pursuant to any document relating 

thereto. 

8.6 The Buyer agrees that the General Conditions and the exclusions which they contain are fair and reasonable bearing in mind that:- 

(1) the Buyer must rely absolutely on the Buyer’s own opinion and/or professional advice concerning the quality state, condition, performance and functionality of the 

Lots any right, title or interest which is sold under the terms of these General Conditions, their fitness and suitability for any particular or any purpose, the possibility 

that some or all of them may have defects not apparent on inspection and examination including, without limitation, the presence of contamination and the 

possibility that the Buyer may not acquire title and the fact that the Buyer would have no remedy under this Agreement should that happen; 

(2) the Buyer has available to it skilled professional advice and on that basis agrees to purchase a Lot for a consideration calculated to take into account amongst other 

things the risk to it represented by the fact that the parties believe that all the exclusions and limitations set out in these General Conditions would be recognised as 

being fully effective by the Courts and the Seller making it clear that it would not have agreed to sell any Lot on any other basis except for a higher consideration; 

(3) the Buyer has been given every opportunity which might reasonably be expected to examine and inspect the Lots. 

8.7 Notwithstanding anything else in the General Conditions, the Seller’s and the Company’s total liability under or in connection with the sale of any Lot, whether in 

respect of breach of contract, tort (including negligence), breach of statutory duty or otherwise, shall be limited in aggregate to the price paid for the Lot or if no price 

has been paid then the higher of the market value or reserve price for the Lot. This Clause 8.7 does not apply to liability for death or personal injury.

SPECIAL CONDITIONS OF SALE 

Seller: 

Location: 

Directions: 

Sale: 

Viewing: 

On the instructions of P A Flint Esq. and B Green Esq. of KPMG LLP, 

the Joint Administrators of Metalbuild Ltd; and others 

Lees Road, Knowsley Industrial Park, Liverpool, L33 7SA 

Leave M58 motorway at junction 1, signposted Kirkby, Maghull (A506). At the 

roundabout take the exit signposted Kirkby A506. Proceed along dual carriageway 

and select right hand lane, signposted Kirkby A506. Proceed along road for 

approximately 2.5 miles and at the first roundabout carry straight on, signposted 

Liverpool, Manchester and St. Helen’s. At the next roundabout take the first exit 

signposted Knowsley Industrial Park into Lees Road. Proceed down the road for 

approximately ½ mile and the premises are on the left hand side. 

Timed Online Sale - This auction has auto bid extension enabled. If a bid is placed 

within 10 minutes of scheduled auction end the auction end time will automatically 

extend by an additional 10 minutes. This continues with the new scheduled end time 

until no one places a bid before auction bidding deadline. Every time a bid is placed 

with 10 minutes or less left in the auction an additional 10 minutes bidding time is 

added until there are no more bids. 

From 9am to 4pm Tuesday 23 March 2010 or by appointment with the agents. 

Access to the Location is allowed on the understanding that viewers attend the 

Location entirely at their own risk and are responsible for and will indemnify the 

Seller and the Company against any losses damage or claims occasioned by their 

presence at the Location. 

Children under the age of 16 will not be allowed access to the Location. 

Registrations: 

All bidders must register their details on www.bidspotter.co.uk 

We do not take credit or debit cards for payment of invoices. 

It is preferable to register at least 24 hours before the sale is due to finish. 

Please note that bidder approval is reliant on bidders entering credit card details 

which are for validity reasons only. WE DO NOT TAKE ANY FORM OF PAYMENT 

BY CREDIT CARD 

Once approved, bidders will be added to our mailing list allowing them to receive 

notifications of future sales by email. If a bidder wishes to stop receiving such 

notifications bidders can unsubscribe by clicking on the link provided at the bottom of 

each sale email. 

Overseas 

Buyers: 

When registering overseas buyers must also provide:- 

• Passport details; 

• other confirmation of their identity and address, e.g. drivers licence; 

• full bank details.

Online Bidding 

The Internet is not foolproof and a number of factors such as speed of connection 

(broadband or modem), numbers of users accessing at the same time, telephone 

line and human error may affect how the sale is viewed. 

Please be aware that due to number of people actively bidding immediately prior to 

the close of sale; occasional delays may be encountered for the Bidspotter system to 

process bids. Please be aware that to avoid this situation; bidders can place ceiling 

bids on lots well in advance of the closure of the sale thus preventing any delay. The 

lots are available for bidding on for a long period before the date and time of a sale. 

Bidders can use more than one computer to place bids if they feel that this would be 

of help to them, i.e. they have numerous lots they wish to bid on. Please use the 

same user name & password on each computer for this multiple bidding facility. 

Sanderson Weatherall LLP will not be held liable in the event of any dispute due to 

errors, omissions, disruptions to internet service or power failures which may occur 

when bidding online. 

Lot descriptions will be amended as appropriate as and when information becomes 

available. It is highly recommended that prospective purchasers read lot descriptions 

before every bid so that they are fully aware of any amendments/conditions of sale 

relating to that particular lot. 

We refer you to our General Terms & Conditions which apply to all sales and stress 

that you read and understand Bidspotter’s terms and conditions of registration. 

Buyers 

Premium: 

Payment: 

Online bidders will pay a premium of 15% and VAT where applicable (see 

www.bidspotter.co.uk for more information). The premium is not negotiable and is 

payable by all Buyers. The Auctioneer, when acting as Agent for the Seller, may 

also receive commission from the Seller. 

All monies must be paid in accordance with the terms and conditions. 

Lots may only be collected upon receipt of cleared funds: Payments will not be 

taken on site unless by special arrangement. 

Telegraphic Transfer - Bank details for telegraphic transfer: 

Account: Sanderson Weatherall LLP P & M Clients Account 

Bank: Barclays Bank Plc, Albion Street, Leeds 

Sort Code: 20-48-46 

Account Number: 10931950 

SWIFTCODE - BARCGB22 

IBANGB84BARC20484610931950 

Cash - In view of Money Laundering Regulations the Company reserves the 

right to refuse payment in cash. Payments in cash of more than £7,000 will 

not, in any circumstances, be accepted. 

Bankers Draft/ Cheques: (made payable to Sanderson Weatherall LLP P & M Clients 

Account) will only be accepted on the basis that any Lots are not removed until 

cleared funds are in Sanderson Weatherall client account. 

We do not accept credit or debit cards for payment of invoices. 

Deposits: 

The Company reserves the right to request a deposit to be paid.

Clearance: All lots must be cleared without fail by 4pm Wednesday 7 April 2010, 

REMOVAL OF ALL LOTS WILL BE STRICTLY BY APPOINTMENT, please see 

invoice for contact details. 

Clearance of all lots must be undertaken in accordance with current Health & Safety 

Legislation, Construction (Design and Management) Regulations 2007. The Buyer 

may have to provide a “method statement” and/or “risk assessment” approved by the 

Company prior to the removal of any lots. The Company reserve the right to halt 

clearance if it is being carried out in an unsafe manner or without an approved 

“method statement” and/or “risk assessment”. 

Electrical disconnections from the mains supply are the responsibility of the Buyer 

and MUST be carried out by an approved electrician. 

Any fluids and/or waste remaining in plant and machinery are the responsibility of the 

Buyer and MUST be removed from the Location strictly in accordance with Control of 

Substances Hazardous to Health Regulations. 

Reserve 

Removal: 

Risk: 

Lots sold subject to a reserve removal will either be indicated in the catalogue with 

the date of availability or will be identified by the Auctioneer at the point of sale. A 

25% deposit will be required as with other lots but in this instance payment in full can 

be left until 5 working days prior to availability. Unless specified to the contrary such 

lots must be removed from site not later than the date and time specified for final 

removal in these Special Conditions of Sale. 

The Bidder is on risk once the offers are accepted and is strongly advised to effect 

insurance at once. 

Transfer of Lots: The Company will only accept payment from and permit removal of Lots purchased 

by the Buyer or its agents. 

Value Added 

Tax: 

Furniture and 

Furnishings: 

Purchasers will be charged Value Added Tax at the current rates on the amount of 

their purchases and the buyers premium. 

All Lots are sold on the understanding that the Seller does not represent them as 

being in a condition which makes them suitable for domestic use. The Buyer is 

reminded that if any Lots are intended for domestic use the Buyer must ensure that 

they comply with the requirements of the Furniture & Furnishings (Fire Safety) 

Regulations.

Conditions of 

Sale: 

The attention of Buyers is drawn to the General Conditions of Sale included online/in 

the Catalogue 

At the end of the online auction final bid figures will be submitted to our clients for 

approval prior to invoicing. Any lot may be subject to a reserve price. No offer may 

be withdrawn and the vendor/agent does not bind himself to accept the highest or 

any offer/bid(s). 

All lots shall be paid for in full within 24 hours of the invoice date and shall be at 

the purchasers risk from the date of invoice. Clearance to be arranged on an 

appointment basis through the contact details on the invoice. 

The whole of the lots must be cleared and taken away, without fail, at the 

purchasers’ expense in such order as the Agents or their representatives shall direct 

not later than the time stated in the Notice to Purchasers after which time any lot or 

lots remaining on the premises will be liable for rent, taxes, men’s wages, and 

expenses and will also be liable to be removed from the premises and left outside at 

the purchaser’s risk in all respects. 

If any purchaser shall make default in payment of his purchase money or neglect to 

comply with these conditions or any of them, all money paid by him or his agents at 

the time of sale shall be forfeited to the Vendors who shall be at liberty to re-sell the 

lot or lots at such time or times as they may think proper and without notice to the 

party or parties making default either by public sale or private contract and the 

deficiency (if any) occasioned by such re-sale together with all expenses attending 

the same shall immediately be paid by the purchaser or purchasers making default 

or neglecting to comply with these conditions and in case of non-payment hereof the 

same shall be recoverable as and for liquidated damages. 

In the event that the auctioneer unknowingly sells an item or items that were not 

eligible for sale (i.e. there is a third party interest that comes to light) then the 

auctioneer shall be entitled to rescind that sale. 

Software: 

Data Protection 

Act: 

Pipework: 

Electric Cable: 

Racks & 

Benches: 

Fire Alarm: 

Smoking: 

Safety: 

Title to computer Software is not transferred and use is subject to any licence or 

copyright restrictions and user conditions. The Vendors/Agents/Auctioneers reserve 

the right to erase any private or sensitive information prior to delivery or at any later 

date. 

The Purchaser undertakes to comply with the provisos of the Data Protection act 

1998 in processing data held by them in connection with these assets. 

Disconnect as marked or as directed. 

Electric cable and pallets are not included with the sale of any lots unless otherwise 

indicated. All electric motors and machinery must be disconnected from the machine 

side of the isolator switch which must be left with the buildings. 

All racks and benches are subject to reserve removal until the contents have been 

cleared. 

In case of a fire alarm all visitors and contractors are to exit buildings and report to 

the Muster Point. 

No smoking on site. Food and Drink is only to be consumed in designated areas. 

All visitors and contractors are reminded that they are responsible for their own 

safety on site and enter at their own risk and should take the precaution of wearing 

protective clothing as appropriate.

HSE: 

HEALTH & SAFETY LEGISLATION, 

CONSTRUCTION (DESIGN AND MANAGEMENT) REGULATIONS 2007 

Purchasers should be aware of the above and comply as appropriate. It is also 

important that all purchasers/contractors comply with site rules, site procedures and 

Health & Safety Regulations. 

Unless specifically excluded purchasers of lots will be required to make good holes 

or voids exposed by the removal of lots. Cladding taken off buildings for removal of 

plant & equipment will have to be replaced, unless otherwise specified by the 

Auctioneer. 

NOTICE TO PURCHASERS 

Purchase of 

Goods using a 

Finance 

Company: 

Overseas 

Buyers: 

If Buyers wish to purchase goods with the help of a finance company they should 

make arrangements well in advance of the Sale to ensure that they are able to make 

payment in accordance with the conditions of sale. 

Overseas Buyers should ensure that the country to which the items are destined:- 

• holds no import restrictions on the goods to be purchased; 

• has no import licence restrictions or a restriction on currency allocation; 

• has no prolonged inspection procedure which might cause excess delay in 

allowing your goods to be imported. 

Overseas Buyers will receive a fully descriptive invoice in order that they may 

arrange payment as soon as possible with the Sellers bank, Barclays Bank plc, 

Albion Street, Leeds LS1. 

Overseas Buyers should employ a suitable freight forwarding organisation. Please 

note that many of the machinery removal companies in this country are not 

necessarily freight forwarders. The Seller will be pleased to advise accordingly. 

Overseas Buyers should read the conditions of Sale. 

Please Note:- (a) The Seller cannot allow removal of any Lot until their Accounts Department 

has received notification from their banker that the Buyer’s payment has 

been properly cleared in full. Monies must be transferred to the Seller within 

the time state in the “Conditions of Sale” on the following page. 

(b) 

If there are any special arrangements that the Buyer wishes to make with the 

Seller, the Buyer must contact the Seller at least three days before the Sale 

Closing date. 

VAT Payments 

and Returns: 

All overseas Buyers (EU and non EU) will be charged VAT at the current rate on 

each Lot purchased. This will be refunded to the overseas Buyer as soon as the 

Seller receives a copy of the bill of lading as proof of export, providing this 

documentation is received within 3 months of the sale date. The Seller is unable to 

refund the VAT on the Buyer’s Premium to non EU countries.

Lot 

Description 

1 Guztiokbat Cestona SUPER-M/140 

700mm swing 960mm in gap x 4000mm 

between centres HOLLOW SPINDLE 

LONG BED REMOVABLE GAP CENTRE 

LATHE, serial no. 18-18, fitted 450mm 

three jaw chuck, four way tool post, two 

three point roller steadies, with 790mm dia. 

face plate & 660mm dia. four jaw chuck 

2 Colchester TRIUMPH 2500 15in swing x 

50in between centres REMOVABLE GAP 

CENTRE LATHE, serial no. VT0526649, 

fitted 10in three jaw chuck, three way tool 

post & AcuRite 2 axis digital read out, with 

three point roller steady & 12in four jaw 

chuck 

3 Colchester TRIUMPH 2000 15in swing x 


CENTRE LATHE, serial no. 6-0004-14785, 

fitted 10in three jaw chuck, three way quick 

change tool post, with three point roller 

steady, 12in four jaw chuck & 9in three jaw 

chuck 

4 Colchester MASTIFF 1400 32in SWING IN 

GAP x 80in BETWEEN CENTRES GAP 

BED CENTRE LATHE, serial no. 

LMF80GIRJX/07130, fitted 16in four jaw 

chuck, three way quick change tool post & 

Mitutoyo linear scale two axis digital read 

out, with spare chucks 

5 Colchester MASCOT 1600 17in swing x 


CENTRE LATHE, serial no. 7/0006/04015, 

fitted 12in three jaw chuck, three way quick 

change tool post & Goodwin GEM40 three 

axis digital read out, with three point roller 

steady 

6 BSA C6241 x 1000 420mm swing x 

1000mm between centres REMOVABLE 

GAP CENTRE LATHE, serial no. 411248, 

fitted taper turning attachment, 200mm 

three jaw chuck, three way quick change 

tool post & Newall C80 2 axis digital read 

out, with two x 300mm four jaw, 250mm 

four jaw chucks, 350mm dia. face plate, two 

point steady & three point roller steady 

7 Hand Operated Arbor Press & Angle Steel 

Stand 

8 Urpe 6in Slotting Machine, with 25½ in x 

8in bed 

9 BNL Hand Operated Pedestal Arbor 

Press 

10 Arboga Maskiner EM825 Pedestal Milling 

& Drilling Machine, serial no. 125222, 

fitted 5in jaw machine vice 

11 Gate PROFITDRIL 1460mm RADIAL 

DRILLING MACHINE, serial no. 75273, 

fitted cast iron box table, 570mm x 500mm 

x 490mm overall 

Lot 

Description 

12 Huron PU551 BED TYPE MILLING 

MACHINE, serial no. 1599, with table, 

1640mm x 700mm overall, fitted Acu-Rite 

III 3 axis digital read out with universal head 

13 Jones & Shipman 540 HORIZONTAL 

SPINDLE SURFACE GRINDING 

MACHINE, serial no. B090158, fitted 

coolant pump, tank & magnetic chuck 

14 Jarocin FWD32 UNIVERSAL MILLING 

MACHINE, serial no. 8897 

15 King Rich KR-V2000 TURRET HEAD 

MILLING MACHINE, serial no. 10172, fitted 

Proto Trak SM auto geometry engine 

control unit 

16 6in Jaw Machine Vice 

17 Marlco Dividing Head, fitted 140mm dia. 

Three jaw chuck 

18 Linisher AV4 Pedestal Vertical Endless 

Belt Grinding Machine 

19 Elliott 8in Double Ended Bench Grinding 

Machine & steel pedestal stand 

20 King Rich KR-V1500 TURRET HEAD 

MILLING MACHINE, serial no. 10238, fitted 

Newall C80 2 axis digital read out 

21 Vertex 6in jaw machine vice 

22 King Rich TURRET HEAD MILLING 

MACHINE, fitted slotting attachment & Acu- 

Rite Mill Mate 2 axis digital read out 


24 Dividing Head, fitted 140mm three jaw 

chuck 

25 Urpe M300G 6in/ 150mm SLOTTING 

MACHINE, with bed 800mm x 315mm 

26 Amdevra 300mm Rotary Table 

27 Dividing Head, fitted 6in three jaw chuck 

28 Chun Jei CB250A 250mm AUTOMATIC 

HORIZONTAL BANDSAWING MACHINE, 

serial no. 75856, fitted hydraulic stock vice 

& roller support table 

29 Union BFT80/2 HORIZONTAL BORING 

MACHINE, serial no. 72002, with 1000mm 

x 1120mm indexing top table, 1225 x 1575 

x 915mm angle plate, 805 x 600 x 495mm 

angle plate, 400mm jaw machine vice, & 

Acu-Rite mill vision 4 axis digital read out 

30 Angle Plate, 48in x 37in x 62in high 

31 Lumsden VERTICAL SPINDLE SURFACE 

GRINDING MACHINE, serial no. 1680, with 

magnetic table 48in x 12in & coolant mist 

extractor unit 

32 Balancing Stand

Lot 

Description 

33 Goodwin Engineering GEL.PH DOUBLE 

COLUMN HYDRAULIC PRESS, serial no. 

1334, 48in between columns, adjustable 

daylight hydraulic oil tank & pump 

34 Spencer & Halstead CENTRIBLAST 

ROTARY BARREL SHOT BLAST 

MACHINE, machine no. 791, works order 

no. W71516, with barrel 36in dia. x 36 in 

long 

35 NI 16in Double Ended Pedestal Grinding 

Machine, serial no. 16/413 

36 Bench & Tooling 

37 Trolley & Tooling 

38 Bench & Tooling 

39 Part Drum Cutting Oil with Mobile Drum 

Stand 

40 Multi Compartment Steel Rack, with mainly 

taper shank drills and reamers 

41 Steel Rack & Contents 

42 1000KG SWL ELECTRIC CHAIN HOIST, 

with A-frame steel framed runway, 9.2m 

long 

43 Five Multi Drawer Steel Rack, with contents 

including mainly fastenings 

44 Electrode Heating Unit 

45 Double Door Steel Cupboard & Contents 

46 Multi Drawer Steel Cabinet & Contents, 

comprising mainly milling machine tooling 

47 Steel Rack & Contents, comprising mainly 

milling machine tooling 

48 Surface Table, 72in x 36in 

49 Granite Inspection Plate, 2ft x 2ft 

50 Surface Plate, 18in x 12in 

51 Machine Guarding, as set out 

52 Acu-Rite MillMate 2 Axis Digital Read Out 

53 Tensile Comparator 

54 Two Collet Sets, with Collet head 

55 Go/ No Gauges & Loose Equipment Under 

Table 

56 Four Pairs V Blocks 

57 Starrett Height Gauge 

58 Vernier Height Gauges & Equipment, as set 

out 

59 Norvic Grade 0 Granite Inspection Plate, 

36in x 24in, with steel stand 

59A 

Equipment, as set out 

60 Two Rotary Tables & Machine Vice 

61 Box Plate, 12in x 9in x 18in 

62 Packing Equipment, as set out 

63 Mobile Steel Bench, fitted engineer’s bench 

vice 

Lot 

Description 

64 6in Jaw Rotary Machine Vice 



67 6.25in Jaw Machine Vice 

68 6.25in Jaw Machine Vice 

69 Hofmann 250mm dia. Rotary Table 

70 Two Parallel Bars & Three Drawer Chuck 

71 Three Vices & Milling Machine Cutter 

72 Loose Contents on Shelf of Bench 

73 Adjustable Angle Plate 

74 Steel Bench 

75 Two Multi Drawer Steel Cabinets, with 

tooling contents 

76 Cleervue Machine Guard 

77 Steel Bar, as set out 

78 Inspection Equipment, as set out on top of 

double door cupboard 

79 Double Door Cupboard & Contents, 

comprising mainly milling machine tooling 

80 Two Multi Drawer Steel Cabinets, with 

contents including mainly milling machine 

tooling 

81 Inspection Equipment, as set out on top of 

steel rack 

82 Steel Frame Rack & Contents, comprising 

mainly taper shank drills & reamers 

83 Double Sided Stock Rack & Contents 

84 Steel Rack & Contents, including mainly 

milling machine cutters 

85 Steel Stock, on floor & on top tier of rack 

86 Nylon Stock, as set out on one shelf of rack 

& at end of rack 

87 Two Tier Single Bay Pallet Rack 

88 STEEL STOCK RACK & CONTENTS, with 

steel stock against wall, steel rack & 

contents, and steel bench & contents 

89 Bar Trolley 

90 Crown Granite Inspection Plate, 12in x 12in 

91 Steel Framed Bench, with contents & 

engineer’s bench vice 

92 Two Multi Drawer Cabinets, with contents 

including mainly drills 

93 Steel Bench & Unlotted Contents 

94 Steel Bench & Contents, with engineer’s 

bench vice 

95 Steel Framed Three Tier Trolley & Contents 



98 Steel Cupboard & Contents, including 

mainly inspection equipment

Lot 

Description 

99 Steel Rack & Contents 

100 Double Door Cupboard & Contents 

101 Steel Stand, Fitted Engineers Bench Vice 

102 Double Door Wood Cupboard & Contents 

103 Guifil PE-60 60 ton x 2500mm 

UPSTROKE HYDRAULIC PRESS BRAKE, 

with tooling as fitted & on rack 

104 Sheet Metal Lockforming Machine 

105 Keetona SHEET METAL POWER 

GUILLOTINE, understood to be 6ft x ¼in 

106 Edwards 49x3ES HAND OPERATED 

TRIPLE BENDING ROLLS, serial no. 431 

1SS/67C22809 

107 Hand Operated 40in x 2in Triple Bending 

Rolls 

108 Edwards Hand Operated 36in x 2in Triple 

Bending Rolls 

109 Ficep 404 HYDRAULIC IRONWORKER, 

serial no. 22098, punch 400kN, 28mm dia. 

x 13mm thickness, section shear 80 x 80 x 

8mm, 38mm dia., 35mm square, plate 

sheer 360mm long, flat 350 x 12mm, angle 

80 x 80 x 12mm, rectangular caper 10mm 

thick, 42mm long, 76mm wide (understood 

to require attention) 

110 200mm Double Ended Bench Grinder, 

with tubular pedestal stand 

111 Walton BPFM 50-14 14SWG HAND 

OPERATED BOX & PAN FOLDING 

MACHINE, serial no. 8550 

112 BOC Transtig AC/DC 375 Tig Welding 

Rectifier, serial no. 7A276 

113 Meddings Driltru DTF 15in Swing Pillar 

Drilling Machine, serial no. 09493 

113A Heavy Duty Steel Bench, 3m x 1.58m 

114 Sheet Stock & Off Cuts, with stock rack & 

off cuts in corner of room 


116 Double Door Steel Cupboard 

117 Cupboards, Bench & Ladder, as set out 

118 Steel Stand & Vice 

119 Multi Drawer Steel Cabinet & Contents 

120 Fabricated Steel Frame 

121 Welding Screens, as set out 

122 Heavy Duty Steel Bench & Contents 

123 Oxy Acetylene Cutting Torch, with hose, 

twin bottle truck (bottles not included) 

124 Two Steel Benches, with record bench vice 

125 Double Door & Single Door Steel 

Cupboards 

126 Mainly Steel Stock, as set out in corner of 

room 

Lot 

Description 

127 Anvil, with stand 

128 Welding Rods, as set out 

129 Assorted Swage Tools, as set out, with 

stand 

130 Ducting, with alloy grid & tube in corner 

131 Welding Electrodes, with other loose 

contents in one compartment of rack 

132 Two Steel Racks, with loose contents 

(excluding paperwork) 

133 Two Steel Racks, with contents & three 

drawer filing cabinet 

134 Atlas Copco GA22 PACKAGE AIR 

COMPRESSOR, serial no. A11263503, 

22kW, 62.8l/s, year of manufacture 2001, 

15733 hours 

135 Atlas Copco FD60 Air Dryer, with filter 

136 Vertical Welded Steel Air Receiver, 800mm 

dia. x 1.7m high 

137 Kingsland 60XA HYDRAULIC 

UNIVERSAL STEELWORKING MACHINE, 

serial no. 181499, punch 38 x 11mm, 

bending 150 x 12mm flat bar, shear 300 x 

15mm flat bar, angle cutting 120 x 12mm @ 

90°, 80 x 8mm @ 45°, section 40mm round 

bar, 35mm square bar, notching 42 x 100 x 

10mm rectangular, 60 x 60 x 10mm vee, 

with punch tooling 

138 Morgan Rushworth PBR2000/4 2000mm 

x 4mm POWER TRIPLE PYRAMID 

BENDING ROLLS, serial no. 091190/390 

139 Pearson 10ft x 375in HYDRAULIC 

GUILLOTINE, serial no. 410805/7, fitted 

front squaring arms 

140 Ajax 23in Swing Pillar Drilling Machine, 

serial no. 20366, with 400 x 400mm hand 

operated rise & fall table 

141 SMT Pullmax Plate Edge Bevelling 

Machine, with lifting cradle 

142 Mosa TS300 SC/EL SILENCED TROLLEY 

MOUNTED DIESEL WELDING 

GENERATOR, serial no. 21986000041, 

20A/21V – 300A/20V (32V), 10kVA 

143 Mosa TS300 SC/EL SILENCED TROLLEY 

MOUNTED DIESEL WELDING 

GENERATOR, serial no. 21986010058, 

20A/21V – 300A/20V (32V), 10kVA 

144 Wilmat 8CB 250kg cap. Hand Hydraulic 

Counter Balanced Fork Lift Stacker Truck, 

serial no. 15673 

145 BT BTVB08-2 2200lb cap. Hand 

Hydraulic Stacker Truck, serial no. 1382 

146 Hand Hydraulic Pallet Truck 

147 Challenge 25 2500kg Hand Hydraulic 

Pallet Truck 

148 Rolatruc Hand Hydraulic Pallet Truck

Lot 

Description 

149 Meba 305C MITRE CUTTING 

HORIZONTAL BANDSAWING MACHINE, 

serial no. 16176, with stock vice & roller bar 

support table 

150 Lincoln Electric Bester Magster 401 Arc 

Welding Rectifier, with Lincoln Electric 

Bester PDE41 Wire Feed Unit 


Welding Rectifier, serial no. P1070101985, 

with Lincoln Electric Bester PDE41 Wire 

Feed Unit 


Welding Rectifier, with Lincoln Electric 

Bester PDE41 Wire Feed Unit 


Welding Rectifier, serial no. P1050402675, 

with Lincoln Electric Bester PDE41 Wire 

Feed Unit 

154 Kemppi Mastertig AC/DC 3500w Tig 

Welding Rectifier, serial no. 862438H 

155 MG MM380 Mig Welding Rectifier, serial 

no. 791012, with MG GT2 Wire Feed Unit 

156 Messer Mira 250 MIG KGE Compact Mig 

Welding Rectifier, serial no. 090-004303- 

00001 

157 Yoshida Magnet Industry KG Panther 

203, model YWG200551/3, 4.9kW/ 27.2V/ 

180A, Trolley Mounted Diesel DC 

Welding Generator, with 2 x 1.5 kVA/110V 

AC power outlets 

158 Messer Saturn 300 MIG KGE Compact 

Mig Welding Rectifier, serial no. 

95253014074 

159 Messer Saturn 200 MIG KGE Compact 


97317010251 

160 Quasi Arc ACP300 Arc Welding 

Transformer 

161 Migatronic MTA200 Mig Welding 

Rectifier, serial no. 83363856 

162 Messer Griesheim WEGA 400 MIG DG 

Arc Welding Rectifier, serial no. 

97234006011, with Messer Griesheim 

M100 wire feed unit 

163 Messer Mira 200 MIG KGE Compact Mig 

Welding Rectifier, serial no. 98175009908 

164 Cebora Plasmacar 30M Plasma Cutting 


165 Fro Tig Set 360 Tig Welding Rectifier, 

with water cooling unit 

166 Hobart Tigwave 250 AC/DC Tig Welding 

Rectifier, serial no. 295WS11230, with TA 

XC600 Water Cooler Unit 

Lot 

Description 

167 Hobart Oerlikon Mega Mig 450 RVS Mig 

Welding Rectifier, serial no. 88WS11115, 

with Hobart Oerlikon H-2000 Wire Feed 

Unit 

168 Oxford Mig 353 Mig Welding Rectifier, 

with Oxford 2R Wire Feed Unit 

169 Messer Gresheim WEGA 400 MIG KGE 


98044002208 

170 Migatronic MTE220 Dialog Arc Welding 


171 Cebora Art2782 10kVA Treadle Operated 

Spot Welding Machine, with water cooled 

electrodes 

172 Hobart Beta Mig 4000 Mig Welding 

Rectifier, with Hobart Olympic 4H wire 

feed unit 

173 BOC Transarc AC240 Arc Welding 

Transformer 

174 Progress 4E 19in Swing Pillar Drilling 

Machine, serial no. BEC71113/144, with 

15in dia. hand operated rise & fall table 

175 Startrite 20RWS 20in Deep in Throat 

Vertical Metal Bandsawing Machine, 

serial no. C8800, with 20½in x 20½in 

canting table, fitted Ideal blade welding unit 

176 Meddings LBI 13in Swing Bench Drilling 

Machine, serial no. 08291 

177 Miller Blu-Pak 45 Constant Voltage DC 

Mig Welding Power Source, with Miller 

20 Series Model 22A 24V Wire Feed Unit 

178 Murex Tradesmig Mig Welding Rectifier 

179 Pickhill 300amp Arc Welding Transformer 

180 CEA Plasma +55 Plasma Cutter 

181 Quasi-Arc ACP300 Arc Welding 

Transformer 

182 BOC Transarc 300 Arc Welding Rectifier, 

with steel trolley 

183 BOC ACP225 Arc Welding Transformer, 

serial no. AF18914S 

184 Three Twin Gas Bottle Trolleys, with 

equipment 

185 Single Gas Bottle Truck 

186 Twin Gas Bottle Truck, with cutting torch & 

equipment (bottles not included) 

187 Twin Gas Bottle Truck, with equipment 

(bottles not included) 




equipment (bottles not included)

Lot 

Description 



191 Two Twin Gas Bottle Trucks, with 

equipment as set out (bottles not included) 



193 Electac Fume Extractor, 115V 

194 Mig Welding Wire, as set out 

195 Welding Electrodes, as set out 

196 Tig Welding Torch 

197 G Clamps, as set out 

198 Steel Welding Bench 

199 Steel Rack & Contents, with double door 

wood cupboard & contents, and steel as set 

out against wall 

200 Multi Drawer Steel Cabinet, with contents 

including mainly taper & straight shank 

drills, steel rack & contents and double door 

wood cupboard 

201 Multi Compartment Steel Rack, with 

contents comprising mainly metric nuts & 

bolts 

202 Tripod Stand, with two flood lights 

203 Double Door Cupboard & Contents 

204 Steel Bench, fitted Engineer’s Bench Vice 

205 Surface Plate, 2ft x 2ft 

206 6in Jaw Engineer’s Bench Vice 

207 200mm dia. Rotary Table 


209 Loose Contents on Shelf under Rack, 

including V blocks & box table 

210 Two Single Door Steel Cupboards 

211 Double Door Steel Cupboard, with contents 

including electric extensions 

212 Steel Double Door Cupboard, with contents 

213 Steel Bench, Fitted Engineer’s Bench Vice, 

with two single door steel cabinets & lamp 

214 Vixen Jetair Abrasive Blast Cabinet, 30in 

wide, serial no. D0245/92 

215 PDQ 15kg Lever Hoist 

216 500kg Chain Block 

217 Elephant 1T Chain Block 

218 PDQ 1000kg Chain Block 






224 Four Leg Lifting Chain & Shackles, as set 

out 

Lot 

Description 

225 Four Leg Lifting Chain 

226 Chain Block 

227 Short Three Leg Lifting Chain 


229 One Pair Welding Rotators (under bench) 

230 Hand Tools, as set out 

231 Tangye 25ton Bottle Jack 

232 Four 5 tonne cap. Toe Jacks 

233 Hydraulic Bottle Jack 

234 Submersible Pump 

235 Peddinghaus 6in Jaw Bar Cropper 

236 Koike IK-12 MAX-3 Oxy Acetylene 

Straight Line Cutter (no track) 

237 Makita HG650C Hot Air Blower, 120V 

238 Metabo Portable Electric Jigsaw, 240V 

239 Bosch 1126.0 Pistol Drill, 110V 

240 Cast Iron Bench 

241 Two Staffa HYDRAULIC BENDING 

MACHINES, with forms on pallet 

242 Clarke Strong-arm 12ton Pipe Bender, with 

forms as set out 

243 Pipe Bending Forms & Equipment, in three 

steel boxes 

244 Hand Hydraulic Pipe Bender 

245 Pipe Bending Forms, in bag 

246 Broaching Equipment, in three boxes 

247 Girder Clamp 

248 Four Slingsby Machine Skates 

249 Three Machine Skates 

250 Two Single Leg Lifting Chains 


252 Two Leg Lifting Chain 

253 Single Leg Lifting Chain 


255 Two Leg Lifting Chain 

256 Shackles, as set out 


258 Consumables & Equipment, as set out 

259 Hypertherm Plasma Consumables, as set 

out 

260 Theodolite Tripod 

261 Welding Rods, as set out 

262 Straightening Rolls 


264 Equipment, as set out 

265 Morris Girder Clamp

Lot 

Description 

266 Rotabest Mini 40/1 Magnetic Drill Stand, 

with drill 

267 Two Engravers 

268 Three Engineer’s Bench Vices 


270 Bearings, as set out on pallet 

271 Weldmate 140 Portable Arc Welder 

272 Plastic Case Multi Outlet Low Voltage 

Transformer 

273 Two Plastic Case Multi Outlet Low Voltage 

Transformers 

274 Three Sash Clamps 

275 Iconix FX1 Digital Beam Weighing Scale 

276 Universal Machine Vice 

277 8½in Machine Vice 


279 Two 0-25mm Plate Clamps 

280 2500kg cap. Plate Clamp 

281 0-32mm Plate Clamp 

282 2 Plate Clamps 


284 Camlok 6T SWL Plate Clamp 

285 Two 0-25mm Plate Clamps 



288 Plate Clamp 

289 Rossendale Group 2500kg SWL Plate 

Clamp 

290 Two Beam Clamps 

291 Two Leg Chain Sling 

292 Two Leg Chain Sling 

293 Steel Frame Bench 

294 Bux Magnetic Drill Stand, with drill 

295 Ridgid 450 Pipe Vice 

296 Double Door Steel Cupboard, with 

personnel locker 

297 Valves & Equipment, as set out 

298 Radiators, as set out 

299 Single Bay Three Tier Pallet Rack 

300 Single Bay Three Tier Pallet Rack, with 

contents 

301 Ridgid 300 PIPE THREADING MACHINE 

302 MCC 80W PIPE THREADING MACHINE 

303 PIPE THREADING MACHINE 

304 Two Pipe Threading Dies 

305 Axle Stand 

Lot 

Description 

306 Contents of Shelf on Rack and Floor 

Underneath, including hose clips, nuts, bolts 

& piping 

307 Piping, as set out 

308 Two Reznor Maximizor 4500 Fans 

309 Hounsfield Spring Tensometer 

310 Elongation Test Unit 

311 Makita Abrasive Disc Cut Off Saw 

312 Makita Abrasive Disc Cut Off Saw 

313 Abrasive Disc Cut Off Saw 

314 Makita 180mm Angle Grinder, 110V 



317 Makita 180mm dia. Angle Grinder, 110V 

318 Bosch GGS7 Straight Drill, 110V 

319 Bosch Pistol Drill, 110V 

320 Evolution ME3500 Magnetic Drill Stand, 

with drill, 110V 


322 Plastic & Flexible Piping, on top of rack 

323 Mainly Lighting, as set out on one shelf of 

rack 

324 Three Pop Rivet Guns 

325 Welding Masks, as set out 

326 Portable Electric Jigsaw, 110V 




330 Makita HP1620 Pistol Drill, 110V 


332 Makita Pistol Drill, 110V 

333 Makita 6510PB Pistol Drill, 110V 


335 Fuse Boxes, as set out on shelf 

336 Ingersoll-Rand Pneumatic Chisel Set 

337 Puller Set 

338 Mainly Tripod Lamps & Stands, on top shelf 

of rack 

339 Mainly 110V Extension Cables, as set out 

on one shelf of rack 

340 Mainly Cable Extension Drums, as set out 

341 Hilti TE25 SDS Drill, 110V 

342 Makita MR4000 Hammer Drill, 110V 

343 Plastic Stacking Bins & Loose Contents of 

bottom shelf of rack 

344 Personal Protective Equipment, in box

Lot 

Description 

345 Plastic Stacking Bins & Contents, with 

louvred wall panels 

346 Tube Bender & Vice, with stand 

347 Record Tube Bender & Vice, with stand 

348 Hilmor Tube Bender & Stand 

349 Stayer Abrasive Disc Cut Off Saw, 110V 

350 Makita 350mm Abrasive Disc Cut Off Saw, 

110V 

351 Donati DMK3 Electric Chain Hoist, with 

carriage 

352 Steel Bench, with engineer’s bench vice 

353 Double Door Steel Cupboard, with contents 

including electrical equipment 

354 Cable, as set out 

355 Steel Double Door Cupboard, with contents 

and equipment in, on, over & around 

356 Timber Bench & Contents 

357 Two Three Tread Step Ladders 

358 Five Welding Screens 

359 Oxford RT180 Arc Welding Transformer, 

serial no. 651112 

360 Steel Double Door Cupboard & Locker, with 

steel framed bench & two single door 

cupboards & contents 

361 Steel Bench, with steel plate on top 


363 Pull Lift Unit 

364 Lifting Chains, as set out 

365 Lifting Chains, as set out 


367 Steel Bench & Double Door Steel Cupboard 

& Contents 

368 Murex Transarc AC330 Arc Welding 

Transformer 

369 Two Steel Trestles 


371 Four Steel Trestles 


373 Two Welding Screens 


375 Steel Bench, with engineer’s bench vice 

376 Magnetic Table, with two angle plates 

377 Single Gas Bottle Truck 

378 Two Tables, Two Double Door Steel 

Cabinets & Two Chairs, with single door 

wood cupboard, single door steel cupboard 

& contents 

379 Steel Bench, with fitted engineer’s bench 

vice 

Lot 

Description 

380 Wilcox Horizontal Belt Linisher, with steel 

bench 


382 One Pair Welding Positioners & Steel 

Trestle 

383 Hand Lever Operated Bar Bender, with 

pedestal 

384 Portable Steel Bench, with fitted engineer’s 

bench vice 

385 Mobile Tool Chest, with contents 

386 Mobile Tool Chest, with contents 

387 STEEL & SHEET STOCK, with sheet stand 

388 Rosengrens Fire Resistant Safe, serial no. 

02.1002, with key 

389 Nederman Portable Industrial Vacuum 

Cleaner 

390 Mobile Tool Chest 

391 Mobile Tool Chest 

392 Record Pipe Vice & Stand 

393 Tubela Heavy Duty Electro-Hydraulic 

Pipe/ Tube Bending Machine, serial no. 

M.1411 

394 Three Roller/ Feed Stands 

395 Strap Banding Equipment, as set out 

396 Steel Stock & Stand 

397 Four Welding Screens 

398 Three Vertical Steel Four Drawer Filing 

Cabinets 

399 Steel Case Truck 

400 Furniture Contents of Office & Passage & 

Store Room 

401 Loose Contents of Stores, including angle 

grinding discs, welding electrodes, paint & 

cabinets 

402 Bux Magnetic Drill Stand, with drill 

403 Duplex G10H Portable Electric Nibbler, 

240V 

404 Three Makita Portable Electric Angle 

Grinders 

405 Three Makita Portable Electric Angle 

Grinders 

406 Two Makita Drills & Makita 6906 Portable 

Electric Impact Wrench 

407 Double Door Steel Cabinet, with contents of 

electrical extensions 

408 Granada 3 tonne SWL Electro Magnetic 

Plate Lifting Beam 

409 Four Building Props 

410 Heat Exchangers & Two Boilers, as set out 

on two pallets

Lot 

Description 

411 Plastic Stacking Bins, with contents 

including nuts, bolts, taps, dies & springs, 

with louvred steel wall panels 

412 Steel Bench, fitted engineer’s bench vice 

413 Mobile Bench, fitted writing slope 

414 Mobile Steel Bench, fitted engineer’s bench 

vice 

415 Steel Stock Rack, with steel stock & 

alloy scaffold tower legs 

416 Mobile Plastic Bin, with safety equipment 

417 Safe Lift 500kg Chain Block 

418 Multi Leg Chain Sling 

419 Chain Sling, as set out 

420 Four Leg Chain Sling 

421 Girder Clamp 


423 Wire Rope Pull Lift 

424 Vital 3 ton Four Wheel Carriage 

425 Nitchi RB-2N 3T Puller 

426 

427 Yale 3 ton Chain Block & Carriage 

428 T SLOTTED CAST IRON BED Plate, 9ft x 

3ft, with steel bench 

429 NY-TE AC36 Winch-Hoist 

430 Cage Pallet, with contents including hose 

431 Cage Pallet, with contents including mainly 

lifting straps 

432 Cage Pallet, with contents including mainly 

safety harnesses & lifting straps 

433 STEEL STOCK RACK & CONTENTS 

434 Plastic Box, with contents including mainly 

cable 

435 STEEL PLATE, as set out 

436 Spiral Wound Ducting, as set out 

437 Folding Alloy Step Ladder 

438 Folding Alloy Step Ladder 

439 Mobile Step Ladder 

440 Double Alloy Extension Ladder 

441 Folding Alloy Extension Ladder 

442 Double Alloy Extension Ladder 

443 Folding Alloy Extension Ladder 

444 Mobile Step Ladder 


446 Horizontal Receiver Mounted Air 

Compressor 

447 Vertical Welded Steel Air Receiver 

Lot 

Description 

448 Leonard Personnel Cage 

449 Fork Lift Truck Jib Arm 

450 PDQ 1 tonne SWL Fork Lift Truck Jib Arm 

451 Fork Lift Truck Jib Arm 

452 One Pair Fork Extensions, 7ft long 

453 Fork Lift Truck Snow Plough Attachment 

454 Four Wheelbarrows 

455 Leonard Fork Lift Truck Tip Skip 



458 Esprit LIGHTNING H4000T & H4000 

DOUBLE GANTRY CNC PLASMA 

PROFILE CUTTING MACHINE, serial no’s 

ESP.3A.139 & ESP.3A.140, year of 

manufacture 1997 (one gantry stored in 

container in yard), with four Hypertherm 

HT2000 plasma cutting heads & plasma 

generators, ten Marlborough sectional 

fume ducted cutting tables approx. 14m x 

4.2m, serial no’s 2782 & 2807 & Burny 5 

CNC controls 

459 Airtec Filtration Dust Filter Unit, with 

centrifugal fan 

460 Dust Filter Unit, with centrifugal fan 

461 TWO Esprit CANTILEVER FOUR HEAD 

OXY GAS PROFILE CUTTING 

MACHINES, with profile/ template table, 7ft 

8in x 5ft, twin rail track 40ft long, three 

sectional cutting tables & Burny 2.5 CNC 

controls 

462 Daf LF45.150 7500kg DROP SIDE 

TRUCK, registration no WX04 YMR, date 

first registered 24/05/04, tested to 31/01/11, 

odometer reading 150,661, with 6.7m drop 

side body 

463 LDV CONVOY 400 3.5T DROP SIDE 

TRUCK, registration no. DN03 WKT, date 

first registered 27/06/03, tested to 01/07/10, 

tax to 31/12/10, odometer reading 95,659 

miles, with 4m drop side flat 

464 Renault KANGOO dCi70 CAR DERIVED 

VAN, registration no. EX52 XDK, date first 

registered 01/09/02, tested to 04/12/10, tax 

to 31/12/10, odometer reading 81,178 

miles, with steel bulk head & side load door 

465 Citroen BERLINGO CAR DERIVED VAN, 

registration no. W388 CVW, date first 

registered 15/05/00, tested to 01/08/10, tax 

to 31/07/10, odometer reading 151,896 

miles 

466 Land Rover FREELANDER GS TD4 

AUTO ESTATE, registration no. PE57 

MMV, date first registered 01/09/07, tax to 

31/08/10, mileage (at time of listing) 52,948 

with black metallic exterior and fabric 

upholstered interior

Lot 

Description 

467 Aabacas 10 TON SWL DOUBLE GIRDER 

TRAVELLING OVERHEAD CRANE, 

approx. 16m span, with pendant controls 

(steel runway & down shop power track not 

included) 

468 Aabacas 7.5 TONNE SWL SINGLE 

GIRDER TRAVELLING OVERHEAD 

CRANE, approx. 16m span, with pendant 

controls, 8 tonne cap. block and electro 

magnet power reel (steel runway & down 

shop power track not included) 

469 Welded Steel Fuel Oil Tank, with delivery 

nozzle, hose & steel bund 

470 Plastic Pipe, as set out in two stacks 

471 Alloy Scaffold Tower Sections, as set out 

472 Tubular Steel Barrier/ Hand Rails, with kick 

plates 

473 Donati GBAC 1000KG FREE STANDING 

PILLAR JIB CRANE, serial no. 034494/01, 

year of manufacture 2005, 4.1m swing, 

2.9m high, 4m high overall 

474 REMAINING UNLOTTED LOOSE 

CONTENTS OF YARD, including steel 

stock, stock racks, two van bodies, steel 

fencing panels (excluding items marked 

“not for sale” including rollers) 

475 20ft Steel Cargo Container (reserve 

removal until contents cleared) 

476 Wire Mesh Gas Bottle Compound (reserve 

removal till contents cleared) 

477 Leather Inlaid Oak Boardroom Table, with 

six matching stand chairs 

478 Bench Seating throughout Canteen Area 

479 Loose Contents of Kitchen Area, including 

microwave ovens, oven, refrigerator & 

counter 

480 Loose Contents of Cleaner’s Store 

481 Office Furniture Contents of Office, 

including desks, draughting board & stand, 

two chairs & filing cabinet 

482 Electric Fan Heaters & Oil Filled Radiator, 

as set out 

483 Desk & Pedestal Fans, as set out 

484 Office Furniture Contents of Room, 

including three filing cabinets, two desks & 

chairs 

485 Dell Vostro 400 Intel Core 2 Duo Personal 

Computer, with 19in flat screen monitor, 

keyboard & mouse (reserve removal till 

hard disk formatted) 

486 HP Compaq Intel Core 2 Duo Personal 

Computer, with 19in monitor, keyboard & 

mouse (reserve removal till hard disk 

formatted) 

Lot 

Description 

487 P4 Personal Computer, with 19in monitor, 









490 Antec Personal Computer, with 17in flat 

screen monitor, keyboard & mouse (reserve 

removal till hard disk formatted) 

491 HP 2800 InkJet Business Printer 

492 HP 4850 ScanJet Scanner 

493 HP 2800 InkJet Business Printer 

494 Brother MFC465CN Scanner/ Printer 

495 Brother Laser Printer, Keyboard, Speakers 

& Mouse 


including desk, side cabinet, book case, 

chairs & filing cabinets 

497 Two Samsung SF-370 Ink Jet Fax 

Machines, & Epson LQ-870 Dot Matrix 

Printer 


including three desks, two filing cabinets & 

three chairs 

499 Fellowes Electric Paper Shredding 

Machine 

500 Office Equipment & Consumables, as set 

out 

501 OCE 3133 Photocopier, serial no. 

313302899 


including two desks, bookcases, side board 

unit, two filing cabinets, drawer pedestal & 

Nobo white board & stand 

503 Five Framed Pictures 

504 Furniture Contents of Reception 

505 Furniture Contents of Room, including two 

desks, two filing cabinets & two chairs 

506 Furniture Contents of Room, including three 

desks, four chairs & filing cabinet 

507 Rexel 250 Electric Paper Shredding 

Machine 

508 Loose Contents of Store Room, including 

four racks & three filing cabinets 

End of Sale

to download a copy of our Online Auction catalogue - Sanderson ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?