2010 Alemlube Master Catalogue.1:Catalogue - Lube Control

Beka-Max Lubrication Kits
BEKA-MAX CHASSIS KITS
Chassis kits are designed for road transport - truck chassis, trailers, garbage
trucks
The typical chassis kit comprises the following components
• Beka-Max EP-1 pump with on board timer and 1.9kg reservoir, 12vdc or 24vdc
• Pump mounting bracket
• MX-F divider valves, designed, assembled and tested for the particular
application
• 8.3mm OD grease filled main line hose
• Reusable hose ends
• 6mm grease filled tube bearing lines
• Bearing connection fittings and adaptors
• Spiral wrapping, cable ties and nuts & bolts
• Circuit diagram and parts list
BEKA-MAX CONSTRUCTION MACHINE KITS
The construction machine kit is heavier duty than the chassis kit, with a
larger reservoir and does not use any tube, only hose.
The typical construction machine kit comprises the following components
• Beka-Max EP-1 pump with on board timer and 4kg reservoir, 12vdc or 24vdc
• 150 micron remote fill point strainer
• MX-F divider valves, all with check valves, designed, assembled and tested for
the particular application
• 8.3mm OD grease filled hose for main lines and bearing lines
• Reusable hose ends
• Bearing connection fittings and adaptors
• Spiral wrapping, cable ties and nuts & bolts
• Circuit diagram and parts list
Beka-Max lubrication kits have been
developed to take the hard work out of
designing and installing automatic
lubrication systems on both on-the-road
equipment such as trucks and trailers
and on construction machines such as
wheel loaders and excavators.
Alemlube supplies as much as we can to
complete the installation.
System Controllers
EDP CONTROLLER
Controls progressive and injector type systems
with cycle switch, pressure switch and low level
inputs. Compact size with LCD count down
display and touch pad interface.
24vdc 6012030
110vac/240vac 6012031
44