Catalog 300 - Kaydon Bearings

More documents

Recommendations

Info

REALI-SLIM ® Bearings Catalog 300 ©KAYDON ® Corporation Issue 10 Lubrication and Maintenance of REALI-SLIM ® Thin-Section Bearings (continued) Bearings, with or without seals, can be supplied with optional lubricants. Shown in the accompanying table are some of the greases and oils more frequently specified. Several have been developed to meet the requirements of unusual operating conditions. Because of this and the variation in cost, it is recommended that lubricants be selected with the assistance of a lubrication expert. Due to the finite shelf life of any wet lubricant, factory lubricated bearings should not be held more than two years prior to use. Contact KAYDON for refurbishment instructions for product held beyond two years of receipt. To realize the full potential of a REALI-SLIM ® bearing, KAYDON recommends that the customer’s maintenance instructions and schedules consider the operating conditions and include procedures to assure the bearings are adequately protected against the intrusion of foreign matter of all types, and fresh oil or grease introduced with sufficient frequency to cleanse the bearing and assure adequate lubrication. Figure 5-2 Lubrication Temperature Ranges GREASES MIL-PRF-81322 General Purpose, Wide Temp Range INFORMATION ONLY NOT FOR DESIGN Section 5–Installation & Maintenance MIL-L-15719 Light Loads DOD-G-24508 General Purpose MIL-PRF-23827 Heavy Loads MIL-G-25013 Light Loads – Low Speed JHA, JA, JB Series - Synthetic, Wide Temperature Range JU and JG Series - General Purpose, Mineral-Based OILS MIL-PRF-6085 Low Volatility, Instrument MIL-PRF-7808 General Purpose, Synthetic MIL-PRF-7870 General Purpose, Low Temp. -100° F 0° F 100° F 200° F 300° F 400° F 500° F 114 | www.kaydonbearings.com 1-800-514-3066
©KAYDON ® Corporation Issue 10 REALI-SLIM ® Bearings Catalog 300 Section 6 — Other Products Page Number • Metric Series Ball Bearings - BB Series.......................................... 116 • Bearings for Demanding Applications.......................................... 119 • KT Series Tapered Roller Bearings................................................. 121 1-800-514-3066 www.kaydonbearings.com|115
Page 1 and 2:
Catalog 300 Reali-Slim® Ball & Rol
Page 3 and 4:
©KAYDON ® Corporation Issue 10 RE
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Design Efficiency REALI-SLIM ® Bea
Page 11 and 12:
Angular Contact Bearing (Type A) Th
Page 13 and 14:
Specifications for Standard REALI-S
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
ULTRA-SLIM ® Bearing Selection Dat
Page 63 and 64: ©KAYDON ® Corporation Issue 10 RE
Page 113: ©KAYDON ® Corporation Issue 10 RE
show all

Catalog 300 - Kaydon Bearings

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?