Download - Schneider Electric

Tech News Letter :CCC/June/EDTech/11 Author :Schneider Technical Support Team
SUBJECT
Rev : 00 Last Modified On- 04/06/2012
INFORMATION
CONTENTS
TARGTED
AUDIENCE
A new firmware version v4.2 released for the EGX300 gateway.
System Integrator, Panel Builder, Marketing, OEMs, Tech Support, End User.
FAMILY
FAMILY: Power Monitoring Hardware
PRODUCT: EGX300
PICTURE
NEW
EVOLUTION
The PowerLogic EGX300 is an integrated gateway-server that requires only a web
browser and Ethernet network to log and display real-time data and trend plots
from up to 64 PowerLogic system devices, including other gateway devices on the
same network and any other communicating device operating under the Modbus
RS 485 protocol.
Now the new firmware v4.2 has been released with EGX300 improvements and
additional device support.
> Added NaN detection for PM9C real time pages.
> Added the following devices:---
- EM3150, EM3155
- EM3250, EM3255
- EM3550, EM3555
- Acti 9 SmartLink
Please refer to PowerLogic.com or Schneider Electric website for access to the new
firmware.
Schneider Electric –Technical Support Team, In-Care@schneider-electric.com 1

SUBJECT
TARGTED
AUDIENCE
CONTENTS
Distributor, Panel Builder, End User, Tech Support.
Range: Micrologic
QUESTION:
What is the meaning of "max. reset table time" and "max. Break time" for the
Micrologic 5.0/6.0/7.0 .
FAQ1
ANSWER:
Max reset table time: It is the time during which a FAULT can appear, before the trip
of the Circuit Breaker.
Max break time: That is the maximum time for the Circuit breaker and the Micrologic
to eliminate the fault.
CONTENTS
Range: Compact NSX
QUESTION:
Is it possible to mount Compact NS motor mechanism over Compact NSX MCCB.
ANSWER:
FAQ2
A Compact NS motor mechanism can only be used on a Compact NS MCCB.
However, Compact NSX motor mechanism may be used on a Compact NSX or NS
MCCB.
Find the answers you need with our new FAQ Technical Knowledge base. Over 1500
regularly updated FAQs available.
http://www.schneider-electric.co.in/sites/india/en/support/faq/faq_main.page
Schneider Electric –Technical Support Team, In-Care@schneider-electric.com 2

SUBJECT
TARGTED
AUDIENCE
System Integrator, Panel Builder, OEM’s, End User, Tech Support.
CONTENTS
Technote on “To establish the TeSys T communication with M340 PLC on Profibus
using PRM module and do the programming of the TeSys T such as it should go in
fallback mode in case of communication failure between M340 PLC & PRM
module on Profibus network.”
PICTURE
TECHNICAL
NOTE
By referring this technical note, it is easy to configure & establish the communication
between TeSys T & M340 PLC on profibus network. Also by making the custom logic
in Tesys T, it is possible for Tesys T should go in fallback mode in case of
communication failure between M340 PLC & PRM module.
Refer the document for Technote Resolution, stepwise programming for this technical
note and the custom logic made at the below link--
http://www.largedocument.com/4/31d8f752/TeSys_T_as_it_should_go_in_fallback_p
osition_in_case_of_communication_failure_between_M340_PLC_%26_PRM.zip
CUSTOMER
VALUE
Customer can easily configure the Tesys T on profibus network using PRM module
and establish the communication between TeSys T & M340 PLC.
NEWS FLASH:
“Creation of Schneider Electric Teachers, an NGO to promote voluntary commitment in educational
and professional training programmes in the energy sector.”
For more information, please refer the below webpage on Schneider website :-
http://www.schneider-electric.co.in/india/en/press/press-releases/viewer-pressreleases.page?c_filepath=/templatedata/Content/Press_Release/data/en/local/2012/04/20120403_creat
ion_of_schneider_electric_teachers_an_ngo_to_promote_voluntary_co.xml
Schneider Electric –Technical Support Team, In-Care@schneider-electric.com 3