321 hectares ploughed in 24 hours STX STEIGER - NEZ AGRO sro

9
HYDRAULICS, PTO AND DRIVELINE
HIGH CAPACITY MEANS HIGHER PRODUCTIVITY
Up to nine remotes*. Four additional valves may be field installed
High lift capacity of up to 8949kg
PTO option available on every model
Efficient power transfer to tow wider implements
To make the most of a new Series four-wheel drive, specify high-capacity
hydraulics, heavy-duty hitch and powerful PTO. When you need to lift,
lower, and power implements, these systems help you do more work.
High performance hydraulics. The hydraulic system of a STEIGER and
QUADTRAC tractor provides power for steering, remotes, power beyond,
and the three-point hitch. A standard 151lpm (159lpm on QUADTRAC
530) pump relies on the efficient pressure-flow-compensating (PFC)
system that delivers the correct flow and pressure where it’s needed when
it’s needed. Specify the 208lpm (216lpm QUADTRAC 530) high-capacity
pump for intensive hydraulic operations such as air seeders and beet
lifters.
Huge lifting capacity, excellent response. To operate mounted tillage
tools, planters or drills, equip this tractor with a factory-installed 3-point
hitch (not available on scraper versions). You’ll instantly have a lift capacity
of up to 8949kg on QUADTRAC models. The raise/lower switch and
position control are within your natural reach on the armrest console.
True pulling power. STEIGER and QUADTRAC tractors have the
advantage where it really matters–at the drawbar. That’s the common
denominator used to size tillage tools to the tractor. The centre-pull
drawbar design efficiently transfers engine horsepower into pulling power.
Unlike competitive units with drawbars mounted much farther behind the
articulation joint, the drawbar of this tractor is just 250mm from the pivot
point for maximum power transfer and increased frame strength.
* to comply with legislation and specification in your country.
Conventional articulated steering gives the QUADTRAC Series full-power
turns within 5.7m with minimal ridging. Easy-effort steering in all conditions allows
you to do more work in less time, without levelling ridges left on headlands.