Simrad Autopilot, Gyro Compass and Heading Sensor ... - ProNav

More documents

Recommendations

Info

16 ap35 compatible accessories Part Number Description 22085112 J3000X Junction unit: One NMEA0183 input and output port. Heading out at 4 Hz. Controls reversible drive units and solenoid activated steering systems drawing up to 6 A. (continuous load) 12 or 24 V DC only 22085120 J300X Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port 2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering systems drawing up to 10 A. (continuous load) 12/24/32 V DC 22085138 J300X-40 Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port 2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering systems drawing up to 20 A. (continuous load) 12/24/32 V DC 22084438 RC25 Rate compass; High performance fluxgate compass with integrated rate gyro provides more stable heading, with 15 m cable 22086995 RFC35 Electronic fluxgate compass; with 15 m cable 22087001 CDI35 Course detector interface. Interface unit to connect autopilot to magnetic compass with CD100A or CD109 course detector. 20106688 CD100A Course Detector; with 5m. Cable. Magnetic course detector with tripod holder for overhead and for conventional magnetic compass. 9525-200-80900 MX575A DGPS Compass with 15M Cable Parts included: MX575A DGPS Compass Sensor MX575A Power/Data 15m Cable MX575A Manual MX575A Pole Mount MX575A Fixed Mount MX575A Mounting Kit 27102185 RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive element 20213773 GI51 Gyro Interface; Mains 12-40VDC. Input – synchro (1:1 and geared), 20 – 70 VDC step signal, and NMEA0183. Outputs – NMEA0183 (per source- HDT, HDG, ROT). Simrad clock data, 24VDC step, sine/cosine (2.5VDC reference). 20193744 RF300 Rudder feedback unit: with transmission link and 10 m cable 22011415 RF45X Rugged rudder feedback unit; with transmission link and 2 m cable 21116165 RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3 21118203 RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3 21118211 RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40) 21118476 RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3 22082929 AP35 Standard mounting kit 22089536 NI300X NMEA 0183 Interface Unit; For installations requiring additional NMEA ports. Features 4 NMEA Rx/Tx ports, 1 AD10 type heading output port. Order required length Robnet cable separately. 22085146 RI35MK2 Rudder Angle Indicator; Designed for indoor/outdoor mounting. Operates with RF300, or RF45X feedback units. Maximum of four units if operated on frequency; two units if operating on current. 20214037 FU50 Follow Up Steering Lever; with mode buttons for FU, STBY and AUTO for indoor/outdoor mounting. Illuminated mode indicators. For use with AP35 and AP50 only. Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Part Number Description 17 20214375 FU50 Flush Mount Kit: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 144mm x 144mm aluminum matches size of RI9. 23241227 S35 Non Follow Up Steering Lever: Spring loaded. Designed for indoor/outdoor mounting. Illuminated mode button. 22088165 JS10 Non Follow Up Steering Lever: Two position NFU lever for indoor/outdoor mounting. 22022446 R3000X Hand-held Remote: with 7m. cable and mounting bracket. Provides NFU steering in STBY and Dodge modes, course changing in Auto mode. 22089494 QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering ap50 and ap50 plus compatible accessories Part Number Description 20214011 “J50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units drawing up to 10A (continuous load) and solenoid activated steering system up to 3A (isolated output). Wheelmark approved for AP50 systems 20214029 J50-40 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units drawing up to 20A (continuous load). 20126819 "JD50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through solid state switching of two independent sets of directional solenoid valves. 19-40VDC,3A. Wheelmark approved for AP50 systems. 20126827 "JD51 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through solid state switching of two independent sets of directional solenoid valves. 110VDC, 1A. Wheelmark approved for AP50 systems. 20126835 "JD52 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through solid state switching of two independent sets of directional solenoid valves. 110/220VAC, 1A. Wheelmark approved for AP50 systems. 20126843 "JD53 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through two galvanic isolated output control signals of +/-10VDC, 4-20mA., or a control signal that can be adjusted within a certain range of an input reference voltage. Wheelmark approved for AP50 systems 20214292 Optional Dual Analog board for NAUT-OSV alarm interface in JD5X. 22084438 RC25 Rate Compass; Fluxgate compass with integrated rate gyro provides more stable heading. With 15m. Cable 22086995 RFC35 Electronic Fluxgate Compass; with 15m. cable. Note: Not recommended as primary steering compass for larger vessels. Can be used as back up/Monitor compass. 22087001 "CDI35 Course detector interface; Interface unit to connect autopilot to magnetic compass with CD100A or CD109 course detector. Wheelmark approved for AP50 systems. 20106688 "CD100A Course Detector; with 5m. cable. Magnetic course detector with tripod holder for overhead and for conventional magnetic compass. Wheelmark approved for AP50 systems 27102185 “RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive element Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Page 1 and 2: PROFESSIONAL SERIES Simrad Autopilo
Page 3 and 4: AP35 Autopilot 3 Solid, rugged and
Page 5 and 6: TYPICAL SIMRAD PROFESSIONAL aP50 SY
Page 7 and 8: 7 TYPICAL SIMRAD PROFESSIONAL AP50
Page 9 and 10: 9 FU50 follow-up STEERING lever The
Page 11 and 12: RF45X RUDDER FEEDBACK UNIT The RF45
Page 13 and 14: GC80/85 basic System HR80 Heading R
Page 15: Technical Specifications 15 ap35, a
Page 19 and 20: Part Number Description 19 23601800
Page 21 and 22: mm gc80 and gc85 sPECIFICATIONS mm
Page 23 and 24: Mx575A SPECIFICATIONS 23 GPS / NAVI

Simrad Autopilot, Gyro Compass and Heading Sensor ... - ProNav

Create successful ePaper yourself

Delete template?

Save as template?