Krautkramer DMS thickness Gauge - Tech-Rentals

Krautkramer DMS thickness Gauge
The DMS combines the most
advanced thickness gauging
features with a powerful, flexible,
on-board alphanumeric Data
Recorder and large LCD display
for A-Scan Verification of the
digital thickness reading.
CONFIDENT MEASUREMENT
View and control A-Scan waveforms
to verify thickness. Measure "throughcoatings"
with Dual and Single
element probes -- no need to remove
coatings (paint) MINIMUM
CAPTURE mode finds thinnest reading and associated A-scan for a series of
measurements
Stable Readings on Hot Surfaces with Dual or Single element high-temperature probes
FREEZE display to eliminate "lift-off effect errors" and interrogate the A-Scan picture
SIMPLE-TO-USE
Convenient keypad & comfortable one-hand control
Easy menu-guided operation
No multiple function keys
Quick-change/quick-charge battery cartridge with standard C-size batteries
Save/Recall 10 instrument setups with A-Scan for test documentation and repeatability
FAST, ACCURATE, ON-THE-JOB RECORDING
16-character alphanumeric file descriptions, locations, and comments
6 flexible inspection-oriented file structures
Direct interface to PIPE+ software program
Record up to 16 user-names inspections comments at each location
OBSTRUCT function for marking unreadable/inaccessible locations
On-site comparison of current vs. previous inspection data at each test point with user set
alarms for amount and rate of change (loss/growth)
On-screen file status for quick review of data before leaving job site
Large memory to store more than a day’s work (up to 80,000 readings/1250 A-Scans)
EASY REPORTS AND DATA MANAGEMENT
Direct reports to printer
DMS data transfer utility program simplifies transfer of inspection files to a P.C.
DMSMATE Bi-directional data control software program with color grid reading report
option
Custom File Generator Software allows creation of unique file structures to match users’
existing terminology

SPECIFICATIONS:
Operating Principle
Ultrasonic pulse/echo
Measurement Modes
Dual Element, Dual-element/ multi-echo
peak, single element/multi-echo peak
and flank
Probe Zero Adjustment
Push button, keyed to instrument probe
zero block
V-Path Correction
Automatic micro-processor controlled
Measuring Range
.008" to 25.00" (.2 to 635 mm); depends
on material, probe, surface condition and
temperature
Digital Displayed Resolution
.001 or .01 up to 9.999";
.01 above 9.9999";
.01 or .1 up to 99.99 mm;
.1 above 99.99 mm
Reading Update Rate
4 Hz; 16 Hz in Min Cap Mode
Gain
Automatic or adjustable in 1 dB steps
Receiver Bandwidth
1-15 MHz (-3dB)
Material Velocity Range
39,400 to 393,662 in/sec.;
1000 to 9999 m/sec.
Power Supply
3 ea. Standard, C-size, NiCad
rechargeable or alkaline batteries
Fast Battery Charger
External, 4 hour maximum charge time
Battery Life (operating time)
10 hours continuous operation with
backlight on
Instrument Shut-off
Manual or automatic
RS232 Port
Bi-directional; selectable: data bits, stop
bits, parity, baud rate (maximum 19,200
baud)
Operating Temperature Range
+10° to +120° F
(-10° to +50° C)
Size
Upper Display Area;
4.75"H x 7.0"W x 2.35"D
Lower Handle Area;
4.75"H x 4.1"W x 1.65"D
Weight
2.4 lbs. (1.09 kg) with batteries
Data Recorder
Memory Capacity
Up to 80,000 thickness readings or 1250
A-Scan Waveforms with full instrument
parameters
Memory Retention
2 years
Menus
Record, Create, Header, Status,
Memory, Report, Comment, Delete
File Structures
Linear, Grid, Boiler, Custom Point,
Custom Linear, Custom Grid
Alphanumeric Input
Keypad input of letters, numbers, space,
and nine special features
Inspection Comments
1 to 16 user-defined, 16 character,
comments per reading
Store/Recall A-Scans
Recall A-Scans for viewing, printing, resetting
instrument, or deleting
Special Functions
Last reading comparison
T-Min/T-Max with LED and
horn alarms
Send/advance controls
Eight direct reports
File copy and append
Date and Time documentation
Programmable from a PC and/or on site
Software
DMS Data Transfer Utility Program
DMSMATE, DATAMATE and
PIPE+ compatible