Norton Industrial Catalog 7362 2011.indd
Norton Industrial Catalog 7362 2011.indd
Norton Industrial Catalog 7362 2011.indd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NORTON DIAMOND / cBN<br />
STOCK WHEELS<br />
HOW TO SELECT NORTON STOCK cBN WHEELS<br />
SELECT<br />
WHEEL DIMENSIONS<br />
D x T x H<br />
Select Diameter x Thickness x Hole from the availability tables.<br />
Use blueprint numbers where available.<br />
ABRASIVE<br />
CB<br />
<strong>Norton</strong> standard coated cBN (cubic Boron Nitride). Optimized for<br />
high performance in resin bond systems.<br />
Select <strong>Norton</strong> cBN abrasive to grind<br />
hard tool steels such as A2, D2,<br />
T15, etc., and tough alloy steels.<br />
GRIT SIZE<br />
100 Roughing. The most common grit size for roughing operations.<br />
120 For roughing where 100 is too coarse. Also for cut-off applications.<br />
150 Medium stock removal plus good finish. For combined roughing<br />
and finishing applications.<br />
Select the grit size based on finish<br />
and material removal rate required.<br />
GRADE<br />
T<br />
W<br />
<strong>Norton</strong> standard. Approximately 75 concentration. T is the first<br />
choice for lower horsepower equipment or large area of contact<br />
between the wheel and the work piece. Ideal for resharpening<br />
applications with 11V9, 12A2, 4A2P, and 15V9 wheel shapes when<br />
dry grinding.<br />
Most durable. Approximately 100 concentration, W is recommended<br />
for high volume coolant operations: flute grinding from solid, flute<br />
polishing, surface, and cylindrical grinding.<br />
The hardness of the wheel<br />
BOND<br />
B99<br />
Aztec III<br />
Aztec .007<br />
<strong>Norton</strong> standard. Pre-engineered for optimal performance with cBN<br />
abrasive. Available in all shapes.<br />
The <strong>Norton</strong> advanced heat-reducing, lubricating resin bond. Used<br />
for dry grinding tool steels.<br />
The <strong>Norton</strong> premium resin bond for increased feed rates, high<br />
stock removal and heavier cuts – when dry grinding tool steels.<br />
Select the bond depending on the<br />
type of grinding application.<br />
ABRASIVE DEPTH<br />
1/16<br />
1/8<br />
1/4<br />
Solid<br />
Usable abrasive<br />
DIAMOND GRINDS:<br />
In general, diamond is used to<br />
grind non-ferrous materials,<br />
because of an adverse reaction<br />
between diamond and iron.<br />
• Cemented carbide<br />
• Glass<br />
• Ceramics<br />
• Fiberglass<br />
• Plastics<br />
• Stone<br />
• Abrasives<br />
• Electronic components<br />
and materials<br />
cBN GRINDS:<br />
cBN is used to grind ferrous<br />
materials.<br />
• High-speed tool steels<br />
• Die steels<br />
• Hardened carbon steels<br />
• Alloy steels<br />
• Aerospace alloys<br />
• Hardened stainless steel<br />
• Abrasion-resistant ferrous<br />
materials<br />
<strong>Norton</strong> offers a comprehensive stock product<br />
selection to service most of your needs –<br />
with the fastest delivery and lowest prices.<br />
• Review this stock section first. If you can not find the<br />
specification you need:<br />
• Then refer to the brief descriptions of our <strong>Norton</strong>/Winter<br />
toolroom, B99 Express, CNC, and saw grinding lines, (following<br />
this section)<br />
• See the “Diamond and cBN” product group on<br />
www.nortonindustrial.com or contact your <strong>Norton</strong> representative<br />
for a complete listing of these stock and made-to-order<br />
superabrasive products.<br />
It is the user’s responsibility to refer to and comply<br />
with ANSI B7.1<br />
www.nortonabrasives.com<br />
263