Connectors - Jetway Computer

More documents

Recommendations

Info

memory. You will be asked to confirm the password. Type the password again and press . You may also press to abort the selection and not enter a password. To disable a password, just press when you are prompted to enter the password. A message will confirm that the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup freely. PASSWORD DISABLED When a password has been enabled, you will be prompted to enter it every time you try to enter Setup. This prevents an unauthorized person from changing any part of your system configuration. Additionally, when a password is enabled, you can also require the BIOS to request a password every time your system is rebooted. This would prevent unauthorized use of your computer. You determine when the password is required within the BIOS Features Setup Menu and its Security option. If the Security option is set to “System”, the password will be required both at boot and at entry to Setup. If set to “Setup”, prompting only occurs when trying to enter Setup. Boot Sector Virus Protection The selection allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table. Enabled Activates automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector of hard disk partition table. 35
3-13 Load Optimal Defaults /Load Standard Defaults Load Optimal Defaults When you press on this item, you get a confirmation dialog box with a message similar to: Pressing loads the default values that are factory settings for optimal performance system operations. Load Standard Defaults When you press on this item, you get a confirmation dialog box with a message similar to: Pressing loads the default values that are factory settings for stable performance system operations. 36
Page 1 and 2: TECHNICAL MANUAL Of AMD 785G & SB 7
Page 3 and 4: TABLE OF CONTENT USER’S NOTICE...
Page 5 and 6: USER’S NOTICE COPYRIGHT OF THIS M
Page 7 and 8: 1-2 Specification Spec Description
Page 9 and 10: HDMI Connector ATX 12V Power Connec
Page 11 and 12: Jumper Jumper Name Description JBAT
Page 13 and 14: 2-2 Connectors and Headers 2-2-1 Co
Page 15 and 16: (3) Front Panel Header: JW-FP1 JW_F
Page 17 and 18: (7)FAN Speed Headers: SYSFAN1(3 pin
Page 19 and 20: 3-1 Entering Setup Power on the com
Page 21 and 22: Power Management Features Use this
Page 23 and 24: Type The optional settings are: Not
Page 25 and 26: ACPI APIC Support Include ACPI APIC
Page 27 and 28: 3-6-1 Memory Configuration DRAM Tim
Page 29 and 30: UMA Frame Buffer Size The optional
Page 31 and 32: accessed through BIOS. IDE Detect T
Page 33 and 34: The optional settings are: Disabled
Page 35 and 36: Clear NVRAM Use the item to clear N
Page 37 and 38: The optional settings are: Auto Fan
Page 39: 3-12 BIOS Security Features You can

Connectors - Jetway Computer

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?