mini-kat series brochure - Jordair Compressors Inc.

MINI-KAT TM SERIES COMPRESSOR SYSTEMS 

Features a 2-year System and 5-year Block Warranty 

Jordair QC Program 

ISO 9001:2008 Cert. 97-544 

CSA Cert. No. LR77799 

CRN Pressure Components 

B&PV Licence MA-2007 

System Features: 

Balanced Design 

Low Noise 

Lifetime Filter Chambers 

Extended Cartridge Life 

Block Features: 

Low Oil Consumption 

Oil Filter Cartridge 

High Tech HP Piston 

Heavy Duty Crank 

The compressor models shown in this brochure and their electrical controls are registered under CSA and certified accordingly. Changes to any 

of the electrical controls or components will void the existing CSA certification. A Special Inspection will need to be performed by CSA to 

certify any custom compressor package. Please consult a Jordair representative for CSA Special Inspection pricing. 

Please consult a Jordair representative for a breakdown of all additional costs that may be incurred on a custom compressor. 

Jordair breathing air compressors and filter systems meet or exceed the latest CSA standard CAN/CSA- 

Z180.1-00 (approved January 2001). 

101-7950 Huston Rd. 

Delta, BC V4G 1C2 Canada 

Website: www.jordair.ca 

JORDAIR – “RELIABILITY & SAFETY” - BAUER Phone: 1-604-940-8101 

Fax: 1-604-940-8131 

Email: info@jordair.ca 

Doc. Jordair MINI-KAT-2013

4500 PSIG COMPRESSORS 

MODEL 

FLOW 

SIZE (CM) 

MOTOR FILTRATION SYSTEM & CAPACITY* WEIGHT 

RATE 

H x D x W 

MINI-KAT5-PE-1E 4.7 SCFM 3.0 HP JBP11-6300-4-5 15,000 FT 3 620 KG 170 x 86 x 159 

MINI-KAT5-PE-3E 4.7 SCFM 3.0 HP JBP11-6300-4-5 15,000 FT 3 620 KG 170 x 86 x 159 

MINI-KAT5-O-1E 6.7 SCFM 5.0 HP JBP11-6300-4-5 15,000 FT 3 640 KG 170 x 86 x 159 

MINI-KAT5-O-3E 6.7 SCFM 5.0 HP JBP11-6300-4-5 15,000 FT 3 640 KG 170 x 86 x 159 


MODEL 

FLOW 

SIZE (CM) 


RATE 

H x D x W 

MINI-KAT5-100-1E 6.5 SCFM 5.0 HP JBP41-6300-4-5 33,800 FT 3 750 KG 170 x 86 x 175 











MODEL 

FLOW 

SIZE (CM) 


RATE 

H x D x W 









* Filter Capacity is based on 20˚C; for a 10˚C increase in temperature decrease capacity by 50% 





Fax: 1-604-940-8131 



TECHNICAL DATA 

STANDARD COMPRESSOR FEATURES 

All MINI-KAT compressors are PLC controlled and can run in either manual or automatic start modes, and include oil, 

interstage and discharge pressure gauges as well as an hour meter and "Power On" light. High air temperature and low 

oil pressure shut down alarms as well as interstage and final pressure relief valves protect the compressor and its 

components. Our compressors are designed to auto drain every 15 minutes into a silent collection system. Jordair 

filtration systems are all rated for 6300 PSIG service and include an oil and water separator, purifier, pressure 

maintaining valve, manual drain valve and auto drain cycle counter. MINI-KAT compressors come standard with a fill 

station and storage cylinders. 

STANDARD FILL STATION AND STORAGE 

J-FFS-DF2 

Fill Station, 2 bottles, with cascade valves - Supplied on MINI-KAT PE & O models 

J-FFS-DF3 

Fill Station, 3 bottles, with cascade valves - Supplied on MINI-KAT 100, 120 & 1214 models 

J-CYL-TC-4500-2 Air Storage, 2 TC cylinders, 4500 PSIG (On MINI-KAT5-PE & O models only) 

J-CYL-TC-4500-3 Air Storage, 3 TC cylinders, 4500 PSIG (On MINI-KAT5-100 to 1214 models only) 

J-CYL-TC-6000-3 Air Storage, 3 TC cylinders, 6000 PSIG (On MINI-KAT6-100 & 1214 models only) 

CAPACITY CALCULATIONS 

Compressor Flow Rate, or “Charge Rate”, is based on filling a 88 cubic (ft3) SCBA cylinder from 1100 to 4500 PSIG 

Technical specifications subject to change without notice 

FILTRATION SYSTEM DESCRIPTION 

JBP11-6300-4-5 Consists of 1 x JS-6000-A-708-15 Separator and 1 x JBF-6300-4-16 (Filter Only, 16" Tower) 

JBP41-6300-4-5/6 Consists of 1 x JS-6000-A-708-15 Separator and 1 x JBF-6300-4-22 (Filter Only, 22" Tower) 

ORDERING INFORMATION 

Single Phase Voltages Available: (-1E) 208V, 230V 

Three Phase Voltages Available: (-3E) 208V, 230V, 460V, 575V 

When placing an order, add the voltage at the end of the model number (eg. MINI-KAT5-100-1E-230V) 

Weights and Sizes are approximations and are subject to change without notice. For exact weights and dimensions 

please consult a Jordair representative. 





Fax: 1-604-940-8131 



COMPRESSOR UPGRADE OPTIONS 

COMPRESSOR FRAME COLOUR: 

J-PCU 

Change compressor frame powder coating colour 

CO & MOISTURE MONITORS: 

J-E-COM-4021-CK 

N15096-C 

CO Monitor c/w Regulator and Calibration Kit 

Securus Moisture Monitor Kit and Cap 

COMPRESSOR FILTRATION SYSTEM: 

JBF-6300-4-32-1U 

Upgrade from 1 x JBP-6300-4-22 Filter to 1 x JBP-6300-4-32 

JBF-6300-4-32-1-SU 

Upgrade from 1 x JBP-6300-4-22 Filter to 1 x JBP-6300-4-32, with Securus 

JBF-6300-4-32-2U 


JBF-6300-4-32-2-SU 


JBF-6300-4-32-3U 


JBF-6300-4-32-3-SU 


*COMPRESSOR SERVICE KITS: 

J-CSKIT-1 

Compressor Service Kit – For IK 100, 120, 121, 12, 1214 Models 

J-CSKIT-1-S Compressor Service Kit – For IK 100, 120, 121, 12, 1214 Models (Securus Filter) 

J-CSKIT-5 

Compressor Service Kit – For PE Models 

J-CSKIT-6 

Compressor Service Kit – For Oceanus Models 

* Breakdown of Service Kits listed on the following page 





Fax: 1-604-940-8131 



COMPRESSOR SERVICE PARTS LISTS AND KITS 

J-CSKIT-1 

Compressor Service Kit – For IK 100, 120, 121, 12, 1214 

Models 

QTY Part Name Part Number 

1 Oil Filter N25326 

1 Inlet Filter Element N25950 

1 Filter Cartridge 67224 

1 *Filter Cartridge 61687 

1 Separator Element FC-708-SE 

1 Separator O-Ring J-OR-2-326 

2 Separator Backup Ring J-OR-8-326 

2 Filter O-Ring J-OR-2-334 

2 Filter Backup Ring J-OR-8-334 

1 Synthetic Oil 4 Litre J-C751-4 

J-CSKIT-5 

Compressor Service Kit – For PE Models 

J-CSKIT-6 

Compressor Service Kit – For Oceanus Models 

QTY Part Name Part Number QTY Part Name Part Number 

1 Inlet Filter N4823 1 Inlet Filter N4823 

1 Filter Cartridge 59183 1 Filter Cartridge 59183 

1 O-ring N26701 1 O-ring N4586 

1 Synthetic Oil 1 Litre J-C751-1 1 Synthetic Oil 1 Litre J-C751-1 

*For compressors with Securus Moisture Monitors, add -S to the end of the kit (eg. J-CSKIT-1-S). The indicated Filter 

Cartridge will be supplied in place of the standard Filter Cartridge. 





Fax: 1-604-940-8131 



FILL STATION UPGRADE OPTIONS 

FILL PRESSURES AND FILL HOSES: 

J-FSFP-1 

1 Additional Fill Hose at 2216, 3000, SCUBA or 4500 PSIG 

J-FSFP-2 


J-FSFP-3 


J-FSFP-4 


J-FSEFP 

Remote Fill Point / Bank Isolation with valve and gauge 

J-FSFP-IV-K 

Isolation Valve Kit for adding an additional fill pressure to fill station 

STORAGE SYSTEM: 

J-SV1018-3 

J-SV1018-4 

J-CYL-TC-5000-3U 

J-CYL-TC-6000-3U 

Auto Cascade - For 3 banks c/w gauges 

Auto Cascade - For 4 banks c/w gauges 

Upgrade from 3 x 4500 PSIG TC Cylinders to 3 x 5000 PSIG TC Cylinders 

Upgrade from 3 x 4500 PSIG TC Cylinders to 3 x 6000 PSIG TC Cylinders 

FILL STATION & STORAGE: 

J-FFS-DF4U 

J-CYL-TC-4500-1A 

Upgrade from J-FFS-DF3 to J-FFS-DF4 Fill Station 

Add 1 x 4500 PSIG TC Cylinder & Manifold 





Fax: 1-604-940-8131 



COMPRESSOR BLOCK TECHNICAL DATA 

4500 PSIG BLOCKS 

COMPRESSOR 

MOTOR 

FINAL 

SPEED FLOW RATE STAGES 

BLOCK 

HP kW PRESSURE 

PE-100 2350 RPM 4.7 SCFM 3 3.0 2.2 4500 PSIG 

OCEANUS 2350 RPM 6.7 SCFM 3 5.0 3.0 4500 PSIG 


COMPRESSOR 

MOTOR 

FINAL 


BLOCK 


IK100 1400 RPM 6.5 SCFM 3 5.0 3.6 5000 PSIG 

IK120 * 1600 RPM 11.0 SCFM 3 7.5 5.2 5000 PSIG 





COMPRESSOR 

MOTOR 

FINAL 


BLOCK 


IK100-420 1300 RPM 5.8 SCFM 3 5.0 3.5 6000 PSIG 

IK120-420 1300 RPM 9.0 SCFM 3 7.5 4.2 6000 PSIG 



* Paired rows share the same compressor block. The model number with the * is the actual block 

number. The other compressor blocks run at different speeds and therefore have been given a 

different number. 





Fax: 1-604-940-8131 



BAUER COMPRESSOR BLOCK FEATURES 

 

 

 

 

 

 

 

 

 

 

New high velocity, full flow cooling fan assembly that produces high velocity airflow over the coolers, pressure 

cylinders and crankcase to cool the compressed air and lubricating oil. 

Drive gear designed for an operating life of up to 30,000 hours. 

Stainless steel inter and after-coolers for high efficiency cooling and corrosion free operation. 

Cylinders are hardened through a plasma-nitrate process for up to 10,000 hours of operating life and low wear 

with excellent lubricating oil retention. 

Redesigned rings for the HP piston are synthetic material for low wear and a long operating life with very little oil 

carry over. 

Single-piece crankcase made of a high strength aluminum alloy for higher stability, larger oil capacity, and low 

vibration. 

Full flow oil system with a crankshaft-driven gear pump and full flow oil filter. 

Visual oil level indicator is designed show the accurate oil level. 

New reed valve on the first stage which offers higher efficiency and redesigned intake filter reduces intake valve 

noise. 

New final stage oil cooled cylinder and cylinder-head for lower air discharge temperature. 

PE 

OCEANUS 

IK100, IK100-420 IK120, IK120-420 IK1214 





Fax: 1-604-940-8131

mini-kat series brochure - Jordair Compressors Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?