om, speedztr 30 ca, 2010-01, zero turn: consumer, 966504101 - Dixon

More documents

Recommendations

Info

Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 2. Move the steering controls to the neutral position (N). operation Parking brake not activated 8050-005 3. Select the cutting height by placing the lever into the desired notch. WARNING! Ensure that no one is near mower when engaging blade control lever. 4. 5. 6. 28 Engage the mower blade by sliding the lever upwards and into the lock notch. Move throttle control to full throttle. The machine’s speed and direction are continuously variable using the two steering controls. When both controls are in the neutral position, the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively. In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Turning on the spot (zero turn) can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. Mower deck’s lifting lever 8058-085 8058-075 Mower blade control lever locked into blade engagement
Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety Instructions. operation WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. • The slowest speed possible should be used before starting up or down hills. • Avoid stopping or changing speed on hills. • If stopping is absolutely necessary, pull drive levers into the neutral position and push to the outside of the unit and engage the parking brake. • To restart movement, release the parking brake. • Pull the control levers back to the center of the mower and press forward to regain forward motion. • Make all turns slowly. Start conditions 8050-020 IMPORTANT INFORMATION When in reverse, control levers return to neutral when released. This may cause the mower to suddenly stop. 29
Page 1 and 2: Operator Manual SPDZTR 30 CA / 9665
Page 3 and 4: Contents INTRODUCTION..............
Page 5 and 6: INTRODUCTION Congratulations Thank
Page 7 and 8: symbols and decals These symbols ar
Page 9 and 10: SAFETY Safety Instructions These in
Page 11 and 12: SAFETY Personal Safety Equipment WA
Page 13 and 14: SAFETY WARNING! The engine must not
Page 15 and 16: SAFETY Sparking can occur when work
Page 17 and 18: CONTROLS This operator’s manual d
Page 19 and 20: CONTROLS Parking Brake The parking
Page 21 and 22: Fuel Shut Off Valve The fuel shut o
Page 23 and 24: operation Read the Safety section a
Page 25 and 26: Move the steering controls outward
Page 27: Slowly push the choke control down
Page 31 and 32: Stopping the Engine Allow the engin
Page 33 and 34: MAINTENANCE Maintenance Schedule Th
Page 35 and 36: MAINTENANCE Battery Your mower is e
Page 37 and 38: Parking Brake Visually check that n
Page 39 and 40: MAINTENANCE Adjusting the Mower Dec
Page 41 and 42: LUBRICATION 8050-924 12/12 Every ye
Page 43 and 44: TROUBLESHOOTING Problem The engine
Page 45 and 46: storage Winter Storage At the end o
Page 47 and 48: TECHNICAL DATA Torque Specification
Page 49 and 50: TECHNICAL DATA SpeedZTR 30 CA Equip
Page 51 and 52: SERVICE JOURNAL Action Date, mtr re
Page 53 and 54: SERVICE JOURNAL Action Date, mtr re
Page 56: P/N 115 312327R1 01/21/10

om, speedztr 30 ca, 2010-01, zero turn: consumer, 966504101 - Dixon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?