PROdUCT RANGE - Krahn Chemie GmbH

ADHESION Promoters
ADHESIVES AND SEALANTS
PRODUCT Group PRODUCT NAME PRODUcer PRODUcT description
Chemlok ®
Chemosil ®
Parlock TM Lord Germany Broad product range of rubber to metal bonding agents. The
bonding is characterized by a high adhesion and resistance
against corrosion, high temperature, oils and solvents.
All common vulcanization methods, like i.e. compression-,
transfer- and injection procedures as well as autoclave
heating with steam or hot air, are applicable.
Eastman TM CP
Eastman
Advantis TM
Eastman TM AP
Eastman
Chemical
Eastman
Chemical
Eastman
Chemical
Chlorinated, solvent- or water-based, adhesion promoters for
coatings applied on plastic parts (PP, PE, TPO).
Waterborne, chlorine-free and APEO-free, product for adhesion
to thermoplastic polyolefin-based plastics (TPO, PP),
also as blend-in resin/wash primer in waterborne primers and
waterborne base coats available.
Non-chlorinated adhesion promoters for adhesion of solventborne
plastic coatings (TPO, PP).
Adhesives CarboBond Future Carbon Products of the CarboBond series are dual-component adhesives
based on epoxy resin to which carbon nanoparticles are
added to produce excellent electrical, thermal and mechanical
properties. Variation of carbon composition and concentration
allows fast and simple optimization for the particular purpose
or application.
Solvents
DMSO
(dimethyl sulfoxide)
DMSO Arkema Polar aprotic solvents, nontoxic replacements for NMP, DMF,
and DMAC.
Ester Alcohol
Eastman
Texanol TM
Eastman
Chemical
Coalescents for dispersions, retarder solvents to extend the
“open-time”, low vapor pressure.
Ether Ester Eastman TM EEP Eastman
Chemical
Glycol Ether Eastman TM EEH Eastman
Chemical
Ethyl 3-ethoxypropionate, slow-evaporating ether ester with
good resistance to solvent, low solution viscosity, excellent
flow and leveling, moderate odor, low surface tension and
high electrical resistance.
Ethylene glycol 2-ethylhexyl ether, low water miscibility, low
surface tension, good hydrolytic stability and high electrical
resistance.
Eastman TM EP
Eastman
Chemical
Ethylene glycol monopropyl ether (propylglycol), colorless,
water-miscible, slow evaporation rate, good viscosity control
in waterborne resins, high flash point.
Ketones Eastman TM MAK Eastman
Chemical
Methyl-n-amylketone, high solvency power, slow evaporation
rate, low density and surface tension, high boiling point.
Eastman TM MIAK
Eastman TM MPK
Eastman
Chemical
Eastman
Chemical
Methylisoamylketone, high solvency power, slow evaporation
rate, low density and surface tension, high boiling point.
Methyl-n-propylketone, suitable for high-solid and low-VOC
systems, acrylates, polyesters, cellulose, epoxy, vinyl and
alkyd resins, high solvency power, slow evaporation rate, low
density and surface tension, high boiling point.
PIGMENTs
Organic Pigments Alpafast Meghmani
Pigments
High Performance Pigments (red 122, violet 19, violet 23) with
high colour strength and excellent solvent, weather and heat
resistance for high quality coatings, printing inks, pigment
preparations and colored sealings.
Meghafast
Meghmani
Organics
Phthalocyanine Pigments (blue, green) and HPP’s (blue 60,
red 170, etc.) with good colour strength, dispersing and
resistance properties for paints and coatings, printing inks
and colored sealings.
4