Foredom Catalog - Hewitt-impex.co.uk

t 

ponKSSKK 

PowerTook 

a 

T 

v 

The Foredom Electric Company 

Quality and Service Since 1922 

l6 Stony Hill Road, Bethel, CT 06801 

Tel. 203 -7 92-8622 . Fax 203-7 96-7 86"1 

Email: info@foredom.com 

www.f oredom.com 

Catalog and Price List 301 Effective October 2007

Foredom? Most 

Powerful ll3HP 

Serr'es TX and TXH 

Prcpackaged Kits- 

"AIl New" Series 5R 

Prcpackaged Kits- 

The ?ll New" Series SR was redesigned 

in Nov 2005, with excellent 

The kits on this page feature our 

results.Ihis 1/6HP motor hasince 

most powerful and technologically 

become the industry benchmark and 

advanced l/3HP, permanent magnet 

Foredom's most popular flex shaft. lt 

motors. The Series TX and Series TXH 

combines all of the features our customers 

expect- power, reversibility, 

(heavy duty version ofTX, see page 

7) offer higher torque at the low end 

reliability, and versatility.The 1/6 HP 

and throughout the entire speed 

Series SR works with our standard 

range of 500 to ,|5,000 RPM. 

speed controls (see page 4) and 20+ 

They use speed controls, shown on 

interchangeable handpieces (see 

page 6, with special electronics that 

pgs. l0-14). 

provide an entirely new level of NEW-3-DISC DVD ADDED TO 

controlled oerformance. WOODCARVING KITS 

The motors in Kits TX300 and 5400 

Kits 5200, 5240, and 5400 now 

have standard shafts and sheaths for 

include Fur, Feathers & Fins, a "How-To 

use with any of our 20+ "quick disconnect" 

handpieces on pgs. 10-14. $29.95 to the total value of these very 

Power Carve" DVD Set. This adds 

The motor in kit TXH440 has a 

substantial kits. 

longer, heavy duty shaft with a 

square drive and protective sheath. SR motor kits are available with 

Thi shaft connects ONLY to the 25H, 'l 15 or 230V motors and speed 

30H and 44HT souare drive handpieces 

shown on page 7. 

page 5 for speed control power 

controls at the same price. See 

cord plug options and specify 

j TX and TXH motor kits are not 

when orderinq, 

I available in 230 Volt, 

t,,,*--**.-- 

2 Yr Warranty on T)ffIXH and 1/6 HP SR Motors & Controls 

1/3 HP 

Series TX 

Motor Kit 

1/3 HP 

Series TXH 

Heavy Duty 

Motor Kit 

I 

Heavy duty shaft connects 

to square drive handpieces 

25H, 30H and 44HT 

Order bv Part Number Shown in Red 

lndustrial Kit 

(.TXH440 .....$399.00 

Series TXH Motor with longer shaft and heavy duty protective sheath 

SXR Foot Operated Speed Control in metal housing 

44HT Handpiece with 1/8" and 114" collets, pin & wrench 

HK25 -A 10 pc. Accessory Kit, flex shaft grease, spare motor brushes 

Total Value: $443 

1/3 HP 

Series TX 

Motor Kit 

10 

'E 

?0@ Handniprp 

with chuckey in 

molded plastic handle 

Ghown in bur holded 

Jewelers Kit 

K.TX300 

......$3s9.00 

SeriesTX Permanent Magnet Motor 

TXR Foot Operated Speed Control in plastic housing 

30@ Handpiece with geared 3-jaw #0 chuck and CK-0 chuckey with 

olastic handle 

No.l I-A 54pc Accessory Kit with rotating bur and tool holder, flex shaft grease, 

spare motor brushes 


Woodcarving Kit 

K.5400 

Series TX Permanent Magnet Motor 

SXR Foot operated Speed Control in metal housing 

44T Handpiece with 3132' , 1/8", and 1/4" collets 

No. 53-A 47 pc Accessory Kit with rotating bur and tool holder plus bonusmall 

bur holder, flex shaft grease, spare motor brushes 

"How-To 

DVD13l-Fur, Feathert & Fins-A 3-disc Power Carve" dvd 

NEW Total Value: $556 

For greater versatility, consider adding the 50C Chisel Handpiece/ EMX 

dial control kit on page 14. 

v

U 

Order by Part Number Shown in Red 

1/6 HP 

Series SR 

Motor Kit 

{ 

New accessory 

kit/storage box 

1/6 HP 

Series SR 

Motor Kit 

30@ Handpiece 

with chuc key in 


(shown in bur holder) 

4--i: 

:. :- tl 

30@ Handpiece 

with chuckey in 


>*- 

:: -$"t 

*.; 

U 

All New 

1/6 HP 

Series SR 

Motor Kit 

General Applications Kit 

K.2272 ......$279,00 

1/6 HP Reversible SR Motor 

FCT Foot 0perated Speed Control in plastic housing 

30@ Handpiece with geared 3-jaw 

chuc key with plastic handle 

No.21-An 84 pcAccessory Kit, 

flex shaft grease 


2272 comes in printed box. 

#0 chuck and CK-O 

- 

fz:ov rvroa.fr 

:-^---- ' zz t z-2 >ee page 

i 5 for plug options I 

and specify. j 

,YVne! oloerys , 

Jewelers Kit 

K.2230 ..$269.00 

New 1/6 HP Reversible 

SR Motor 

FCT Foot Operated Speed Control 

30' Handpiece with geared 3-jaw #0 

chuck and CK-O chuck key with 

plastic handle 

No.11-A 54pc Accessory Kit with 

rotating bur and tool holdel flex 

shaft grease 


All New 

1/6 HP 

Series 5R 

Motor Kit 

20 Handpiece 

qurcK I 

Lnange 

Jewelers Kit 

K.2220 ..$279.00 

Same,as the 2230 Kit except includes 

the 20 Quick Change handpiece in 

place of the 30@. The 20 is for use 

only with 3/32" shank burs. 


v 

2; 

44T Handpiece with 3/32", 

1/8", and 1/4" collets 

5240 Kit comes in 

new printed box. 

ffiiv"ain+o-l-: 

i See page 5 for plug l 

I options and specify I 

i*!9'9r9.lIq 1 

Woodcarving Kit 

K.s240 ......$299.00 

All New 1/6 HP Reversible SR Motor 

FCT Foot 0perated Speed Control in plastic housing 

44T Handpiece wirh3132',l/8", & 1/4" collets 

No. 53-47pc Accessory Kit with rotating bur and tool 

holder plus bonusmall bur holder, flex shaft grease 

"How-To 

DVDl31-Fur, Feathert & Fins-A 3-disc 

Power Carve" dvd 

NEW Total Value: $460 

Handpiece with 

3132" and l/8"collets 

Deluxe Woodcarving Kit with 2 Handpieces 

K.s200 ,$399.00 

All New 1/6 HP Reversible SR Motor 

SCT Foot Operated Speed Control in meti 

44T Handpiece wi1J:3132',118", and 114 

28 Handpiece with 3/32" and l/8" collet 

No, 53-A 47pc Accessory Kit with rotatini 

plus bonusmall bur holder, safety glasse 

"How-To 

DVDI3l-Fur, Feathert & Fins-A 3-disc Power Carve" dvd 

NEW Total Value: $534

AII New 116 HP Series SR Motorc 

0rderbvparrNumbershowninRed 

L4 

e 

*J 

o 

ru 

e 

a s 

,o 

L, 

F 

A Motor with All the Best 

Features plus More Power 

The All New 1/6HP Series 5R is our 

most popular motor. It combines the 

most imDortant features our customers 

expeqFpower, reversibility, reliability, 

and versatility- all into one motor. 

More PowerTheAll New 1/6 hp, ball 

bearing Series SR has 33% more power 

than our older 1/8 hp motors and 66% 

more than our original 1/10 hp models. 

The added power helps to reduce 

stalling or slowing down under 

normal workloads. 

Reliable Two year warranty. 

Versatile 5R motors are available in 

both 1 5 Volt and 230 Volt. 

Revercible lhis great feature is not 

well understood by many of our users. 

Please see the yellow box in the middle 

of the page to learn more about running 

in reverse rotation. 

lle SR, SRM and SRB come with 

standard 39" long flexible shafts and 

sheaths for connecting to any o{ 

'quick 

Foredom's 20+ disconnect' handpieces 

(see pages 10-14). 

The SR hang-up model also comes in the 

2212, 2220, 2230, 5200 and 5240 

prepacked kits on page 3. 

Speed Controls 

The reliable FCf is Foredom's most popular 

soeed control. lt features solid state 

circuitry in a heavy duty plastic housing 

with an extra wide footprint low profile, 

and non-skid pads or the bottom for 

ease of use. lt provides smooth controi 

throughout the entire speed range. CSA 

fisted.7" long,4%" widq 2z/a" high, 

ship wt-2 lbs./'l kg. 

. . :.ii .r..- _-. - _ 

Ihe SCI offers the samelectronia and 

smoolh control as the fCT but in a much 

heavier, cast iron housing. The bottom 

surface of the SCT is covered with 

nsn-skid material. The a{ded wepghl of 

the metal housing eliminates any unexpected 

movement of the control along 

the floor" CSA listed.6%' long,4" wide, 

2%",high, $jp wt-6 hs/2.7 kg. 

the EM is a solid stah control in a 

plastic housing drat sib on a table top 

and has a dial for adjurtingend setting,r' 

speed by hand. The EM has other advantaoes: 

You'can maintain and return to a 

delired spggime and again, by using 

the motor or#offlrrritch rather than the 

speed contro[10 povrrer up the unit. Plus, 

tire EM hal a0 e.asy to access and 

replaceablq. f:iilqttrat:protects the el ectronis 

during power'suqes and wo{< 

overloads.5".long, 57+' widq 2%" high, 

ship wt- 2 lbs.l1 kg. 

2 Year Warranty on 1/6 HP Series SR Motors and 

Controls. Max. Speed 18,000 RPM 

t-in 

$ 

1/6 HP SRM Bench Style 

Built-in Control 

M.SRM ....$255.00 

M.SRB-EM 

15 Volt + CSA Listed-15 Volt 

1/5 HP SR Hang-Up Style 

M.SR-FCT* $220.00 

M.SR-SCT* . . 245.00 

M.SR-EM ...245.00 

+ CSA Listed-l 

Series 5R and SRH motors 

1/6 HP SRB Bench Style 

M.SRB-FCT* $250.00 

M.SRB-SCT* . 275.00 

..27s.00 

are available in 230 Volt at same prices, See page 5 for speed control power cord 

plug options and specify when ordering. 

Advantages of Running 

Reverce Rotation 

Speed Controls for 

Series SR Motors- 

. Left handed users have more control 

of the cutting tool when in reverse 

r Reverse helps to keep dust and 

other debris flying away from right 

handed users 

These controls are equipped with two 

'i 

cords coming off the back, The 5" 

shorter cord or socket connector acceots 

the motor plug, and the longer, 6' cord 

connects to a power outlet. 

t Alternating motor direction helps 

to extend the life of certain abrasives 

o Reverse helps with accomplishing 

symmetrical grinding and caruing 

techniques 

r Reverse makes it easier to back 

out drill bits that are stuck 

r Alternating motor direction makes 

it easier and faster to polish metals 

FCT 

scT 

EM Table-too dial control in 

Foot control in plastic housing Foot control in cast iron housingplastic 

housing 

c.FcT-'r (11sv)+ ........ $35.00c.scT-1 

('r 1 sv)+.....,... $50.00c.EM-1 

(11 sV)........... $50.00 

c.FcH-2 (230V) ........... 35.00 c.scH-2 (230v) ........... 50.00c.EMH-2 

(230V) .......... 50.00 

+ + CSA Listed CSA Listed 

To order replacement speed controls for 230V 1/8HP Series S and SR motors, specify part nos. FCT-2, SCT-2, 

and EM-2 at same price. 

4 

v 

v 

V2

AII New 1/6 HPSen'es SRH Heavy DuW Motorc orderbypartNumbershow 

_ 

tt 

v 

v 

2 Year Warranty on 1/6 HP Series SRtl Motors and 

Controls. Max. Speed 18,000 RPM 

built-in 

speed 

control 

SRH, SRMH, and SRBH motors have 

the lener'H'added to their model 

;.;;;,; il.ntiry tnr' as'heavy duty'. 

These motors are the same as the SR, 

SRM and SRB, but comequipped with 

60" long square drive shafts and heavy 

duty protective sheaths for use 0NLY 

with Foredom's 

'square 

three special 

drive' handpieces-25H, 30H, 44HT 

shown on page7. 

They are available in both 115 

Volt and 230 Volt versions. 

SRH and SRBH models use Foredom's 

standard controls, shown on the opposite 

page. SRMH models have a 

builtin control, 

Heavy duty flex shafts are the ultimate 

power tools for debuning, buffing, 

Heavy duty shaft and sheath -) 

grinding, polishing, and metal finishing SRH Hang-Up Style SRMH Bench Style SRBH Bench Style 

of any kind with larger rotary accessories,They 

are also ideal for large scale M,sRH-SCT ,.270.00 M,SRMH ...$280.00 M.SRBH.SCT .300.00 

M,SRH-FCT . $245.00 with Built-in Control M.SRBH-FCT $275.00 

W0odcqrving and sculpting applicationsM.SRH-EM ,,270.00 M.SRBH-EM .300.00 

l'ffth ctrbide or steel burs and larger 

,,mountdd grinding stones. , 

All New 1/6 HPSenbs SR Motor wiilr CE Mad< 

Series SR CE 

This AII New 1/6 HP motor meets all CE 

electrical and safetv reouirements. lt 

must be used with ihe FcT-zcE foot 

control shown at right. 

The SR CE has the same specifications 

as the All New Series SR motor- 

116HP,125 watts,'18,000 rpm plus CE 

compliance (see complete motor 

description 

opposite page). 

The control's oower cord can be 

equipped with a North American, United 

Kingdom, Australian, or Continental 

European style plug, shown below 

Foredom'quick disconnect' handpieces 

can be used with this motor. 

2 Year Warranty on Series SR CE Motor and 

Control. Max. Speed 18,000 RPM 

lmportant Note Ahout Series TX CE 

and Series K Motors: 

TX'CE and Series K Motors have been 

,disionlihued, However, speed controls, 

b- 

trhdintenaiice'and repair parts are 

stifl available.,,, 

, 

SR CE Mark Hang-Up Style 

M.sR-FCT-2CE ..... $2ss.00c.FcT-2CE ...$70.00 

230 Volt Speed Contrcl Power Cotd and PIug Options 

The standard 3-prong US style plug will be supplied on all 230 volt controlt including the F( 

if specifying a non-US style plug. 

Plug Type Part No. t 

UK plug with internal fuse (CE Compliant) 

... CP0PTI0N 21 

[,Tu'ilfr],'#i:Tit ::l 1 i':::11 :::::l::::: cpopT,oN 22 I 

Australian with 3 prongs (CE Compliant) 

Cord with no plug (NOT CE Compliant). 

..... CPOPTION 26 \ 

..... CP0PTI0N 20 

f: 

To use Foredom's Slip joint hand- i 

pieces with the 5R CE motor, you i 

will need to order our 1081 ] 

European style shaft, sheath. and 

motor connector (see page 16). 

i 

l 

t 

i 

5

113 HP Series TX High Torque at AllSpeeds orderbyparrNumbershown 

in Red 

High Torque at AIL Speeds 

TX. TXM. and TXB motors are 

Foredom's most oowedul flex shaft 

machines. ihey have permanent 

magnet DC motors that feature the 

latest in flex shaft technology. These 

ball bearing models utilize advanced 

rar eafth magnets (in place of the 

wound fields in our universal type SR 

motors) that deliver more torque at the 

low end and throughout the entire 

speed range of 500 to 15,000 

RPM. 

No other flex shaft gives you greater 

control of the cutting tool, drill, or bur 

under any load. 

TX, TXM, and TXB motors come with 

standard 39" long flexible shafts and 

sheaths for connecting to any of 

Foredom's 20+ "ouick disconnect" 

handpieces (see pages l0-14). 

Foredom's permanent magnet motors 

require the use of a TXR, SXR, or 

EMX control. Damage will result if the 

motor is connected to any other model 

control. See note below 

The Series TX hang-up model is also 

available in prepackaged kits TX300 

and 5400 on page 2, 

TX motors are available in 

115 Volt 0NtY 

High Performance with 

Smooth and Controlled 

Acceleration 

Three models of speed controls are 

available for Foredom's Series TX, TXH, 

and redesigned Series LX, LXH and PGX 

permanent magnet motors (formerly 

Series L and PG). They offer especially 

smooth and controlled peformance. 

TX Hang-Up Style 

TXM Bench Style with TXB Bench Style 

M.TX-TXR . $295.00 Built-in Control 

M.TXB-TXR . $325.00 

M.TX-SXR ...315.00 M.TXM ....$325.00M.TXB-SXR . . 345.00 

M.TX-EMX ..315.00 

M.TXB.EMX . 345.00 

Heavy duty models in 1 5V are available. See next page. 

. 

2 Year Warranty on Series TX Motors and Controls. 

Available in 115 Volt. Max. Speed 15,000 RPM 

Speed Controls for Permanent Magnet Motorr Series D( TXH, and 

Redesigned Series [L LXH, and Series PGX 

2 

sxR 

TXR 

EMX 

Foot operated control in plastic Foot operated control in cast Table-top dial control in plastic 

housing 

iron housing 

housing 

C.TXR-I (115V) ... . , $55.00 c.sxR-l (1lsv).,.., $75.00 c.EMX-l (115V) .....$75.00 

These specially designed controls are equipped with mo cords coming off the back. The 15" shorter cord or socket connector 

has a unique style plug that fits the shielded motor plug. The longer 6' cord connects to a power outlet. 

w

18 HP Sgnbs TXH Heavy DuU Motorc 'rderbypartNumbershowninRed 

(t 

f-. 

v 

2 Year Warranty on Series TXH Motors and Controls. 

Available in 115 Volt. Max. Speed 15,000 RPM 

Motorc 

These special handpieces have'square 

drives' and positive sheath locking positive sheath 

mechanisms (locking rings) for use with locking ring 

Series SRH motors shown on page 5 

and TXH and LXH motorshown above. 

Speed 

$35O.OO 

. 37O.OO 

37O.OO 

2 Year Warranty on Series LXll Motors and Controls. 

Max. Speed 5,000 RPM 

LXH Hang-Up Style LXMH Bench Style LXBH Bench Style 

M.LXH-TXR . $295.00 with Built-in Control M.rXBH-TXR $32s.00 

M.LXH-SXR ..3't5,00 M.LXMH ...$325.00M.rXBH-SXR . 34s.00 

M.LXH-EMX .315.00 

M.IXBH-EMX 345.00 

See next page for LX motor and control combinations. 

Special Square Drive Handpieces for SRH, TXH & UX Heavy Duty FIex Shafts 

: 

TXH, IXMH, TXBH, LXH, LXMH, and 

LXBH motors have the letter'H' added 

to their model names to identi{y them 

as'heavy duty'. These motors are the 

same as the TX, TXM, TXBH, LX, LXM 

and XB, but comequipped with 60" 

long square drive shafts and heavy duty 

protective sheaths for use 0NLY with 

'square 

Foredom's three special drive' 

handpieces- 25H, 30H, 44HT 

shown below 

(Heavy duty l-XH motors and speed control 

combinations are listed wifrout photos.) 

built-in 

ln addition to special handpieces, 

speed 

these models also require the use 

control 

of the special controls built for our 

PM motors as shown on the 

Heavy duty ! shaft and sheath + 

opposite page. 

TXH Hang-Up Style TXMH Bench Style TXBH Bench Style 

Heavy duty flex shafts are the ultimate 

M.TXH-TXR . $32O.OOwith Built-in Control M.TXBH-TXR 

power tools for deburring, buffing, 

M.TXH-SXR 

grinding, polishing, 

. . 340.00 M.TXMH ...$350.00M.TXBH-sXR 

and metal finishing 

of any kind with larger rotary accessories. 

Ihey are also ideal for large scale 

M.TXH-EMX . 340.00 

M.TXBH-EMX 

woodcarving and sculpting applications 

with carbide or steel burs and larger 

Sen'es LXH Heavy DuA, High TorquelLow 

mounted grinding stones. 

25H, 30H, and 44HT handpieces 

cannot be used on a Foredom flex 

shaft with 

'quick 

a standard disconnect' 

key tip shaft and sheath. 

25H Heavy Duty Collet Style 30H Chuck Style 44HT Collet Style 

The heavy duty 25H has larger, H.25H. ....$1ss.00 H.30H. .....$70.00 H.44HT "".".$62.00 

permanently lubricated and shielded Comes with l/8" and l/4" Collets. Comes with geared 3-jaw #0 chuck and Comes with 1/8" and 1/4" Collets. 

ball bearings for cool running continuous 

use. Precision collets from 1116" to 11lsz" dia.,61/8" long, ship wt. I 1.35 oz. 1" dia.,5131rc" long, ship wt. 10.55 oz. 1" dia.,61lq" long, ship wt. 9.85 oz. 

See Collet Set 103000 

on Page I 7. CK-0 Chuck Key with molded plastic handle. See Collet Set 440 on Page 17. 

114" and3,4, and 6mrn are available. 

1. Pull back the locking ring toward the 2, Release the locking ring when you feel 

The 30H has permanently lubricated, Connecting Square front end of the handpiece while you insertthe shaft connect to the handpiece. You 

,lhielded battl bealings And geared 3-jaw 

the tip of the flex shaft. You may need to should hear a click. 3. To remove the handpiece, 

pull back the locking ring in the 

Drive Handpieces to 

#0 chuck with 0-5/32" (4mm) capacity. 

rotate the handpiece slightly until the 

Includes chuck key in handle. Heavy Duty Flex Shafts square shaft tip engages the spindle. same way and pull the shaft and sheath 

from the handpiece. 

lhe rl4HT is a collet-type handpiece. 

loditignl!:llalf irlliigl']t]r.:.o.'!1 ,:1r{161,,!g,,i:,]:]:r,], 

rr 

ril4l,iii:lll.l32l,l,iilatefi enti'ehd 13mmr,and.l:.': 

6mm ae also available. 

square drive tip 

on flex shaft 

proper connection of handpiece to shaft

Series LX High Torque/Low Speed @p to spw rpm) Order by part Number shown in Red 

We've re-engineered our Series L motors 

and they now have the letter'X' added 

to their model names-X for extra nower. 

lhese permanent magnet motors are 

specifically designed for low speed/high 

torque applications and now offer more 

power for stone setting, wax modeling, 

and pearl drilling. 

D( [XM, and LXB ball bearing motors 

feature full power and torque from start 

up and throughout the entire speed 

range up to 5,000 rpm. 

Ihese motors are 

ideal for use with 

Foredom's drill 

presses.'lhey also 

are well matched 

with $e 15 and 

15D Hammer 

tlandpieces. 

Series lX. LXM, 

and LXB motors 

' 

ome with stan- 

LX Hang-Up Style 

M.LX-TXR , . $270.00 

M.LX-SXR .. . 290.00 

M.rx-EMX . . 290.00 

2 Year Warranty on Series [X Motorc & Controls. U 

LXM Bench Style 

with Built-in Control 

M.rxM .... $300.00 

LB Bench Style 

M.LXB.TXR . $3OO.OO 

Series LX Motors are also available in M.LXB-SXR . . 320.00 

230 Volt at same prices. Please Specify. M.LXB-EMX , 32O.OO 

Series lJ( and LXH Motors are also available in 230 Volt at same prices. See page 5 for speed control power 

cord plug options. Please specify when ordering. See page 7 for heavy duty versions of the Series LX. 

lmportant Notice About Series CC, R, H, I, PG and 1/8 HP 5 and SR Motors: 

These motors are discontinued. However, maintenance, repair parts, and speed controls for Series L, Series PG, the 1/10 HP CC, DD MM, 

R, RM, RB, l14HP H, HM, HB, and 1/B HP SR, SRM, SRB, t SM, and SB models are available. 

Instrudional DVDs 

NEW n-Dvntgt $29.95 Fur, Feathers & Fins 

3 hour long, 3 project, 3-disc set with 

and Small Mouth Bass. A rabbit 

pattern and sandpaper template for a split 

mandrel are included. 

"Foredom 

A 25-min. bonus video chapter called Basics" covers all 

the basics of using our tools - flex shaft set-up, operation and maintenance. 

Included in Foredom's 5200, 5240 and 5400 Woodcarving Kits (see pgs 2-3). 

NEW Formatting A-DVDI25 $4.95 

AllSet@ and PowerGraver@ 

Hour-long DVD features instructional material for both the 

AllSet and PowerGraver - two specialized jeweler's tools. Jef{ 

-"-j;'/d- 

.*c$q 

. lvldtlltsvv), Mathews, the tllc LU-lllvellLUI co-inventor Ul of the Llle AllSet AllJeL walks WdlK5 you yUU through 

UllUUgll 

iThlg.* ,J.,t , all of the set-ups for using the stone setting kits. 

Y"# W;/ Instruction for using the Po-werGraver for setting and engrav- 

\i.lfl*"r' ing operations is covered by George Bennett. 

This DVD comes in the AllSet Master Kits AK820, AK8205J, and AK825 and the 

PowerGraver Kits 2293 and 2295 (see pages 20 and27). 

Packed in paper sleeve. 0rder by Model Number Shown in Red.

tt 

{t-. 

{t 

Routine Maintenance for your Foredom Flex Shaft Machine 

Foredo motors are durable and built to industrial standards. But like many other quality machines, they require some basic maintenance to keep them running 

at optimum performance. The procedures shown here are described in more detail in your printed Owners Manual and on our website. Always unplug your 

power tool when conducting maintenance proceduresl 

Visit our website homepage (wwwforedom.com)for vide of all the maintenance stepshown below. 

Routine Cleaning of Motors 

It is important to routinely clean your 

Foredom Power Tool. Accumulation of 

dirt and dust is the most common cause 

of poor operation and excessive wear. 

Air should be blown through the motor 

every 40 hours of use to remove dirt 

and dust. 

Replacement of Motor Brushes 

The motor brusheshould be checked 

for wear periodically. When new, they 

are approximately 3/4" (19mm) long. 

Replace them when they have worn to 

1/4" (6mm). 

To remove brushes, disconnect motor 

power cord and unscrew the 

orusn caps. 

Safety Produds 

Order by Part Number Shown in Red. 

It ls Extremely lmportant To Always Wear Safety Glasses 

When Operating Any Power Tool. 

A-5G3 $14,95 

Safety Glasses 

Clear polycarbonate glasses with a 

contemporary style and unitary lens 

design. Temples are length adjustable 

with slotted ends. Comes with black 

neck cord. 

c.FcG $25.00 

0n/0ff Foot Switch 

Momentary 0n 

Use with flexible shaft machines 

(exceptTX, LX or PGX) to sustain full 

speed in operation. Also use with scroll 

saws, drill presses, and other stationary 

power tools. Permits user to turn tool on 

and off without using the manual 

switch. Rated for 115V or 230Y,1/4 HP, 

5 amp max. motors. Comes with 18" 

cord with receptacle plug and 6'cord 

with 3-prong plug. 

Routine Cleaning and Lubrication of Flexible Shaft 

The shaft should be checked, wiped clean, and re-lubed with greasevery 

50 hours of use. With every 200 hours of use, the shaft should be thoroughly 

cleaned with solvent and Iubricated. 

A. With the handpiece removed, loosen 

the set screw and slide sheath out 

of the motor connector. 

B. Apply a very light coating of grease 

to the shaft. lf too much grease is 

applied, the excess will work its way 

into the handpiece and eventually seep 

out. For this reason, apply a bit less 

near the handpiece end of the shaft. 

C. Replace and adjust sheath so that 

shaft key tip extends 3/4" (19mm) 

from 

sheath. Retighten the set screw in 

motor c0nnector. 

D. Clean exterior of sheath by wiping 

with a cloth. 

E. Hang and run the motor for about 

10 minutes before re-attaching the 

handpiece to allow enough time for 

the grease to warm up, spread and 

drain off Wipe off any excess grease 

at tip end of sheath. 

Never run the motor with the outer 

sheath removed. 

A-5103-10 $4,50/1Opk 

A-51 03-l 00 $39.00/1 00pk 

3M Soft Foam Ear Plugs 

These are soft foam ear plugs with a 

patented articulated shape for 

improved fit and comfort. Made of 

hypo-allergenic materials, they roll 

down for easier insertion and fit for 

small ear canals. 

A-6106-5 $12.00/6pk 

3M Particulate Respirator 

A three-panel respirator with low 

profile design that folds flat and fits a 

wide range of face sizes. Comfortable, 

lightweight and convenient. Has 

Cool FlowrM Exhalation Valve for 

working in heat and humidity. 

4-6102 $3.00/roll 

3M Vetrap Tape 

Self-adhering tape is easy to apply 

and requires no pins, clips or adhesive 

to secure it. TaDe won't loosen over 

time and stays in place until removed. 

Doesn't stick to hair;, skin, or anything 

else. Use to protect fingers during 

close work with sharp instruments. 

I WrOe X l) tono. 

tl 

o X 

Ln 

AJ 

0r 

- 

rD 

= 

Or 

- 

n 

o 

o + 

n 

rD 

a_ 

d 

I 

h 

Or 

d'' 

q 

+oa_ 

n 

G. 

I 

': 

,l

Interchangeable General H,trpose Handpieces 

0rder bv Part Number Shown in Red. 

Ihe handpieces shown below are among our most popular since they work with different size shank accessories for a broad range of applications. The 8, 

'Quick 

28, 30@. 43T & MI are suitable for continuous use, interchangeable, and have Foredom's Disconnect' feature (see bottom of page 1 

'l ). Ihey have 

pre-lubricated ball bearings that do not require any additional lubrication by the user. 

H.30':ffi ilHi:[:"##:'ifiJ;:11,1*';::,]lti'ilT.??i 

$Ol 

with the CK-O chuc[ key with molded plistic handle.Vbrious bench top tools are 

available to work with the versatile 30, including Foredom's drill presses (pg. 19), 

and handpiece holder (pg. 17), and the Allset@ Stone Setting Kits (p9.27). 

5t/a" long,1 

" dia., wt. 5.85 oz., ship wt. 9.1 oz. 

The 44I and 43T are ideal for many industrial and woodcarving applications 

NEUTI 

Our new 

"stubby" version of the 44T is great for getting into tight, difficult - 

to+each, and interior spaces with larger accessories 

The 44T accommodates accessories with shank sizes up to 1/4" in diameter. 

Comes with three collets- 3/32" (2.35mm), 1/8" (3.18mm) and 114" (6.4mm), and 

H.44T pin and chuck wrench. Other fractional and metricollets are available separately 

$59 and in Collet Set 440 (p9.17). Can also be used in Foredom's handpiece holder 

(pg. 17) and drill presses (pg. I 9). 

5%" long, 1" dia. (center), 314" dia. (taper), wt, 5.85 oz., ship wt. 8.6 oz. 

H.437 

$sg 

H.28 

$5e 

Same as the 44T except an 1 " shorter. The 43T also comes with three collets- 

?32"(2.35mm), 

1/8" (3.18mm) and 114" (6.4mm), and pin and chuck wrench. 

0ther fractional and metricollets are available separately and in Collet Set 440 

(pg. 17). Can be used in Foredom's handpiece holder (pg. 17), but it is too short for 

use in drill presses. 

41/2" long,1" dia. (center), 314" dia. (taper), wt.4.9 oz., ship wt. 7.75 oz. 

The 28 has a slender; comfortable design and tapered grip, Comes with V32" 

(2.35mm) and 1i8" (3.18mm) collets, and pin and chuck wrench. Other fractional 

& metricollets are available separately and in Collet Set 600 (pg. 17). 

5%" long, 314" dia. (center), 1/2" dia. (taper), wt. 3 oz., ship wt.4,35 oz. 

H.8 

$5e 

The 8 has a slim design and chuck guard sleeve that protects fingers when working 

close and slides back when changing collets and accessories. Comes with 732" 

(2.35mm) and 1/8" (3.18mm) collett and set of chuck wrenches. Other fractional 

and metricollets are available separately and in Collet Set 600 (pg. 17). 

6tle" long, 5/8" dia,, wt. 3.55 oz., ship wt. 5.1 oz. 

1 & 2 Changing Accessories 

Foredom Handpieces come supplied with the tools needed to change accessories. lt's 

easy to insert or remove an accessory using a chuckey for the No. 306, or a pin and 

wrench for the Nos. 44L 43128, and set of wrenches for the No. 8. 

3 & 4 Pencil Grip Handling 

Foredom's Nos. 28 and 8 Handpieces have slender designs with tapered front grips for 

holding like a pencil The No. 8 has a chuck guard that slides back when changing collets 

and accessories. 

10

! 

lnterchangeahle Handpr'eces with Quick Change Bur Releases 

For Use 0nly with 2.35mm (3/32") Burs order by part Number shown in Red, 

Quick Change are a sub-group of Collet Type handpieces that accommodate only a single collet size--2.35mm (or 

3/32'). Quick Change handpieces allow you to change out accessories (burs, bits, cutten drills, etc.) with only a brief 

interruption 

work and withouthe use of a chuc key or pin & wrench. We offer push/pull, push lever, and rotating 

lever style bur release mechanisms. Selection is a matter of personal preferencg as all save time for stone setten and 

other users making frequent bur changes. lt is important to always store a bur in the collet of a Quick Change 

handpiece even when not in use. 

Press-to-Release lever Action 

Simply push lever down to open collet, release lever to lock in bur. 

H.l8 

$140 

Foredom's most popular Quick Change handpiece features a super slim 

grip and lever action that opens and closes the collet. lt has pre-lubricated 

ball bearings that do not require lubrication. Removing and cleaning of 

the precision collet is easy to do. 

7" long,19132" dia., wt. 3.65 oz., ship wt. 4.45 oz. 

Lever Action 

To insert an accessory rotate lever 90o away from handpiece body. Insert 

accessory and move lever fonruard or back 900 into locked position. 

The 20 has a molded plastic front grip with tapered sides for easy and close 

handling. lt has pre-lubricated ball bearings that do not require lubrication. 

5%" long, 11ia" dia. (center) 3/8" dia. (frontaper), wt. 4 oz., ship wt. 5.0 oz. 

Push/PullAction 

H.52Simply 

pull to open chuck, insert accessory and push to close and lock. 

$140 

The 52 has a durable plastic banel and grip that is comfortable to hold. lt 

is smooth running with pre-lubricated ball bearings that do not require 

any lubrication.A push/pull action on the handpiece body is all that is 

required to change accessories. 

5r/2" long,51164" dia., wt.3 oz., ship wt.5.5 oz. 

Lever Action 

To insert an accessory rotate lever 1800 

toward back end of handpiece. 

H.l0Insert 

accessory and move lever forward 1800 

into locked position. 

$229 

The 10 has a rotating lever action that releases and closes the collet for quick 

and easy changes. lt requires lubrication after the first 2-3 months of continuous 

use. 

7s/rc" long,21l32" dia.,v'ft.4,55 oz., ship M. 5.5 oz. 

U 

What is an lnterchangeable Handpiece? 

Foredom's Quick Disconnect or'QD'feature makes it 

fast and easy to interchange handpieces to any 

flexible shaft (except for models with heavy duty 

square drive tips i.e SRH, TXH or XH). QD refers 

to the back portion of Foredom's extensive selection 

of QD type handpieces. Inside the QD is a 

round connector with a keyway slothat accepts the 

#ry 

keyway 

slot on inside 

back end of handpiece 

key tip on the end of the flexible shaft. Since the QD's are 

the same on all handpieces of this type they are interchangeable 

and can be attached or removed with 

ease. When attaching a handpiece, be sure that 

the keyed tip of the flexible shaft is properly lined 

up with the keyway slot in the back end by look' 

ing inside before pushing it on. To remove, simply 

pull the handpiece off the shaft with a firm grip. 

11

Spxial 

Use Interchangeable Handptbces 0rder by part Number shown in Red, 

L 

H.l5 $133 Hammef 6h" tons, i/4" dia at tip, wt. 3.6s oz., ship wt 48s oz. 

Our hammer handpiece has a reciprocating rather than rotary action and is used at 

low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. lt requires 

oeriodic lubrication. 

The hammer has a 1/32" stroke and its impact force can be adjusted from lighto 

heavy by turning the silver knurled adjusting ring. lt comes with an Anvil Point (10177) 

and pin for installing and tightening points.A Pav6 Point (R15PT) for special texturing 

and Stylus with Carbide Tip (10212) for marking or scribing hardened steel are 

available separately. 

nr+r*M 

Anvil Point 

Optional Pav6 Point 

HP10177 $4.00 A-Rl5PT 519,50 

Threads on these tools are 4-48 US thread 

Interchangeable 

Handpreces with 

Duplex Springs 

0rder bv Model Number in Red 

nnl@E 

Optional Carbide Stylus 

HPr0212 $29.00 

H.8D $re 

H.l0D $24e 

H.25 $rso Heavy Duty 

5%" long, 11h2" dia.,wt.7.15 oz., ship wt. 9.6 oz. 

A precision, colletstyle handpiece made for continueus production work. The 25 

has double shielded ball bearings and a heavier duty housing than our regular 

interchangeable handpieces. 

The 25 comes with 1r8" (3.18mm) and 1/4" (6.35mm) collets, and pin and chuck 

wrench. Other fractional and metricollets are available separately and in Collet 

Set 103000 (page 17), (25C chuck style hear.ry duty model has been discontinued.) 

See 8 Handpiece for full description. 

93/a" long,5/8" dia., wt. 5.2 oz., ship wt.7.35 oz. 


103h" long,21l32" dia., wt.5.95 oz., ship wt.7.4 oz. 

Foredom offers eight handpieces 

with Duplex Springs, denoted by the 

letter'D' at the end of each oart number. 

The spring connects the two separated ends 

of a handpiece 

is all that distinguishes 

these handoieces from standard models. 

The duplex spring component requires 

oeriodic lubrication. 

Duplex Springs providextra flexibility to a 

handpiece when more precise control for delicate 

work is required. The spring drive is made of special 

steel, double wound, tubular construction with a 

protective flexible spring cover. Replacement springs 

(Part No.76, see page l7) are available and can be 

installed by the user. 

Duplex springs are subjecto breakage 

and are not covered by warranty, 

We recommend that only experienced users of 

flex shaftools and/or those whose work demands 

added flexibility consider this style handpiece. 

H.l50 $r53 

H.l8D $160 

H.20D $10e 

H.52D $r60 


9s/a" long, 1/4" dia. at tip, wt. 5.2 oz., ship wt 715 oz. 

See 18 Handoiece for full descriotion. 

10%" long, 19132" dia., wt. 5.3 oz., ship wt.6.85 oz. 


10%" long, 11ls" dia. (center), 3/8" dia. (frontaper) 

wt. 5.4 oz., ship wt. 7.5 oz. 

See 52 Handpiece for full description 

10" long, 51i64' dia., wt. 5.15 oz., ship wt. 8.4 oz 

H.55D $r0e 

See 55A Handpiece for full description. 

9%" Iong,7116" dia., max. hea dimension 5/8", wt.3.75 oz., ship wt. 5.8 oz. 

H,56D $10e 

See 56A Handpiece for full description. 

g1/2" long,1116" dia., max. hea dimension 5E",v,tt 4 oz., ship wt. 6.05 oz. 

12

..t 

Special Use lnterchangeable Handpr'eces 'rderby parr Number shown in Red 

'f ,$fp]f,{!jfr f'3;{$""!:; st-;tlry'., .= 

-u'e $ud 

H.35 $tzg Speed Increasing 

Recommended for use 

with Series TX motors 

5%" long, 1%s" dia., wt.8 oz., ship wt. 10.3 oz. 

This unique handpiece has a ball bearing speed increaser that produces 2,5 times 

the speed of the motor. lhis feature makes it perfect for bright cutting with diamond 

flywheels and other high speed work with carbide and diamond points. 

The 35 comes with a 1,E" (3.18mm) collet installed unless otherwise specified. Other 

fractional and metricollets available separately and in Collet Set 103000 

(page 17). 

Note: The No. 35 handpiece should not be 

operated at speeds faster than 35,000 rpm. 

When connected to your standard Foredomotor 

(that runs up to 18,000 

rpm), motor speed must be 

kept at 14,000 rpm or less (7590 of full no-load 

speed)" We recommend using the 35 with the 

powerful TXM bench-style motor whic has a built-in 

dial control, or theTX hang-up model with the EMX 

dial control for setting and holding speed to within 

35,000 rpm range. Another option is using a 

standard motor with an EM dial control. 

H.55A $89 ta" contra-angle handpiece is good for intricate and delicate jobs 

in awkward and hard-to-reach spots.6%" long,7116" dia., max. hea dimen.5i8", 

wt.2.1 oz., ship wt.3.5 oz. 

54" (16mm) 

H.56A $89 similar to the 55A except that iihas a righrangle head. 

61/8" long,7116" dia., max. hea dimen.5/8", wt.2.35 oz., ship wt.3.7 oz. 

Angle Head for latch-type accessories 

Angle head handpieces are for light and intermittent work and the miniature gears 

in their heads require frequent lubrication.They come with wrro latch-type mandrels. 

Can also be used with latch-type steel burt mounted abrasive points, and diamond 

points available from Foredom- see Accessory Catalog or visit vrnrwv.foredom.com. 

Changing latch-type Use for a wide variety of light-duty jobs 

accessories is easy...iustin hard-to-reach areas: 

turn the iatch to open . 

and close the collet. 

debuning, finishing and polishing metals 

. removing oxidation and 

cleaning electrical and 

electronic contacts 

. removing flux coatings 

from PC boards 

. reworking and repairing 

circuit boards 

Slip loint Handptecgs for European Machines orderbypartNumbershown 

inRed 

Slip joint handpieces will fit on all European made flexible shaft machines with 

"slip 

joint" 

"QD" 

connections. They cannot be used with the standard style flex shaft 

on all Foredom flexible shaft machines. A European style flexible shaft and sheath 

is available to reolace the standard shaft and sheath on all Foredomachines. 

A special motor coupling is also required (see page 16). 

S-10810A European Style Shaft and Sheath . . 

$1 25.00 

UA540 European Motor Coupling and Connector Kit. .. 

.. 16.50 

S-10811 CompleteConversionAssembly(10810AandUA540)'135.00 

General Purpose 

Quick Change 

H.l8SJ $140 

Suitable for use only with 2.35nn (382") shank burs 

or mandrels. See 1 I Handpiece for full description. 

63/a" long,19132" dia., wt. 3.6 oz., ship vrrt.4.9 oz. 

H.8SJ$s9 

Comes with 2.35mm (3/32") and 3mm collets, and 

chuck wrench set. See 8 Handpiece for full description 

51/2" long,5l8" dia,, wt. 3,5 oz., ship wt,4.65 oz. 

H.20SJ $8e 

Suitable for use only with 2.35mm (3/32") shank burs or 

mandrels. See 20 Handpiece for full description. 

51/2" long,51164" dia., wt. 2.95 oz., ship wt. 5.3 oz. 

H.28SJ $5e 

Comes with 2.35mm (3/32") and 3mm collets, and pin 

and chuck wrench set. See 28 Handoiece for full 

description.5Ta" long, 3 | 4" dia., 112" dia. (taper), 

wt. 3 oz., ship wt. 4.70 oz. 

H.52SJ $140 

Hammer 

Suitable for use only with 2.35mm (3132") shank burs or 

mandrels. See 52 Handpiece for full description. 

5t/2" long,51164" dia., wt, 2.95 oz., ship wt. 5.8 oz. 

H.30SJ$6s 

Comes with geared 3-jaw #0 chuck with 0-4mm (5/32") 

capacity and CK-0 chuckey. See 30 Handpiece for full 

description. 53h" long,1 

" dia., wt. 6.45 oz., 

shio wt.9.55 oz. 

H.l5SJ $133 

Speed Increasing 

Comes with threaded anvil point and pin to tighten 

point. See I 5 Handpiece for full description. 

5%" long, l/4" dia. at tip, wt. 3.55 oz., ship wt.4.9 oz. 

U 

H.4ATSI $se 

Lomes wltn l35mm l5l5l ), Jmm, ano bmm collets, 

and pin and chuck wrench set. See 44T Handpiece for 

full description. 61/4" long,1 

" dia. (center) 3/4" dia. 

(taped, wt. 6.75 oz., ship wt.9.04 oz. 

13 

H.35SJ S17g Comes with 3mm collet unless otherwise specified. 


6t/t" long, 13/rc" dia., wt. 9.45 oz., ship wt. 10.7 oz.

Power Chisel C-aruen No.50 Handprece 

For use in forward rotation only 

H.50Chisel Handpiece Set 

{with 6pc. Chisel Set 1) $79.00 

H,50 Chisel Handpiece 

(no chisels) $49.00 

Dimensions shown in mm 

6" long, 1" diameter weight 4.6 oz., 

ship wt.6.65 oz. 

ilillh- 

Foredom's Chisel Handpiece is 

designed to give a power assist to 

carving projects in all types of wood, 

fonvard rotation only. 

plastic, plaster and soft carving stone. 

It reaches optimum performance when used between 1,000 -8,000 rpm. 

lhe No. 50 is a reciprocating'hammer' We also recommend the use of a bench top dial speed control, in place 

type handpiece that requires a light 

of the more common foot pedal, to run steady within the recommended 

pressure to engage the hammering speed range. Carvers can set and maintain any desired speed when connected 

chisel action. lt attaches in the same to a dial control.See Kits EM-50 and EMX-50 below. 

manner to any Foredom 

other flex 

shaft with a standard key tip shaft. lt is Foredom offers quality, 22 Chisels- Actual Size 

shaped like the popular tl4T but has its pre-sharpened steel 

own unique and rugged textured plastic 

banel and tapered aluminum tip. 

Profiles with Specifications 

chisels that are availaUe 

individually and in ses. 

Comes 

#1 Chisels Single Bevel 

in Set 

#l x9mm A-KC509 $6.95 1' 3 

#1 x14.5mm A-KC511 $8.95 2'3 

Dial Control Kits with 

No. 50 Chisel Handpiece 

+ 11 Chisels (Sets 1 & 2) 

0rder the EM for use with the 

1i6 hp Series SR and other 

Foredom universal-type motors. 

Kit K.EM-50 $169.00 

EM-No. 50 plus Sets 1 & 2 

Order the EMX model for use 

with TX and LX permanent 

magnet motors. 

Kit K.EMX-50 $184.00 

EMX-No.50 plus Sets 1 & 2 

#2 Right Skews Single Bevel 

NEyll AK510 $79 

12pc. Chisel Set in PouchFluteroni 

Chisels in Set 3 (at right) comes in 

8mm 

\-J 

Canvas Chisel Pouch that measures 12mm 

93/t" x7" (248 x 178mm) open and L--,,1 

folds to 47q" x31/2" (127 x 89mm). 

A-KC500 $15.00 {canvas pouch Sweeps 

also available separately) 

\--t-dr 

#3 x 9mm A-KC503 

A-KC515 $8.95 3,4 

A-KC72I $9,95 5 

#3x l4mm A-KC501 

\-*/ #7 x 8mm A-KC504 

#7 x 13mm A-KC502 

\ ^ / 

$6.9s r,3 

$8.95 2,3 

$5.95 1,3 

$8.95 2,3 

\_.-/ 

#7xl7mm A-KC718$9.9s s 

\ ,/ #8xlomm A-Kcso8 $8.95 2,3 

\ / #9x9mm A-Kc514 $8.95 4 

#sx6mm A-Kcsl7 $6.95 4 

\ \./ / 

\ ,/ #9x14mm A-Kc723 $9.9s s 

U #11 x3.5mm A-Kc5o5 $6.9s 1, 3 

V Parting Tools 

#2 x 9mm A-KC510 $6.95 1,3 

#2 x l4mm A-KC512 $8.95 4 

$6.95 1, 3 

$8.9s 2,3 

chisel sets 

Come packed in hanging 

case shown at bottom left 

Set 1 

AKHK550 6pc. $39 

A-KC503, A-KC504, A-KC505, 

A-KC506, A-KC509, A-KC51 0 

Set 2 

AKHK560 5pc. $eg 

A-KC501, A-KC502, A-KC507, 

A-KC508, A-KC51 1 

Set 3 

AK510 12pc. $79 

A-KC501, A-KC502, A-KC503, 

A-KC504, A-KC505, A-KC506, 

A-KC507, A-KC508, A-KCs09, 

A-KC51 0, A-KC5I 1, A-KC51 5 

packed in A-KC500 Canvas Pouch 

Set 4-NEW 

AKHK570 6pc. $+S 

A-KC51 2, A-KC51 3, A-KC51 4, 

A-KC51 5, A-KC51 6, A-KCsl 7 

L 

lllfY, 

Typical dimensions for 

iffii"i'il' fln'i;'ff"'"" 

0rder by Part Number Shown in Red 

110"x 7mm A-KC516 

$9.95 5 

$6.9s 4 

\ ./ 110"xllmm A-KC513 $8.95 4 

: - } 

\ -/ 11trx16nn A-Kc722 $9.95 5 

Set 5-NEW 

AKHK580 5pc. $as 

A-KC71 7, A-KC71 8, A-KC721 , 

A-KC722, A-KC723 

14

Bur Holderc Order bv Part Number Shown in Red 

Store and organize burs, drill bits, and other accessories with various size shanks. 

holdsmall tool such as files 

and screwdrivers. Measures 7" 

wide x 4" high (178 x 102mm). 

Bu6 not included 

A-r0080 $r4.95 

Rotating Bur 

Holder- Universal 

ForAll Size Shanks 

Rotatino bur holder 

stores and organizes 126 

accessories including 1116', 

3132', 

1/8". and l/4" shank. Measures 7" 

wide by 4" high (178 x 102mm) and 

holds 6$- 3/32" or 1/8" bun (in 2- 

ffir**- step holes), 12-114" buq 

and 4!-1116" bun. 

Bun not included. 

Other Prod u ct Cata I og s f rom Foredo mE I a ckstone I n d ustries 

A-r0082 

$14,95 

Rotating 

Bur and 

Tool Holder- 

For l/8" and1l4" Shank Burs, 

DrillBits 1116'-5132' 

This rotating holder organizes up 

tol 12 accessories. Stores: 92- 1/8" 

shank and 13-1/4" shank 

bun. Has 7 marked holes for 

drill birs 1/16" t0 5/32'. lts 3' 

deep x 23/+" dia. center cup 

Requests these catalogs at 

www.foredom.com 

call us: 

Foredom's Accessory Catalog contains 

the most comorehensive selection of 

accessories for flex shafu and other 

rotary tools from a single source. 

Olsont Performance Plus Band Saw 

Blade Brochure and Scroll Saw Blade 

Selection Chart contain extensive selections 

of blades for cutting all types of 

wood, plastic and metal. 

Zonal Catalog features its popular line 

of razor saws and many other qualitymade 

hand tools for hobbies. 

t00r 

H 

lbft 

15

Maintenance Kits for flex shaft 

motors contain a shaft, pair of 

motor brushet grease and operating 

manual. Kits are suitable for 

115 and 230 volt models, except 

where noted. 

Maintenance Kits 

MSMK-16 For 1/3 HP Series TX, TXM, and TXB motors ........... $20.00 

MSMK-'|0 ForAll New 1/6 HP Series 5R,sRM, and SRB motors 16.00 

MSMK-8 For 1/8 HP Series SR, SRM, SRB, t 5M, and SB motors 16'00 

MSMK-9 For 1/10 HP Series CC, MM, and DD 115 Volt 

motors on|y................. ................... 16.00 

MSMK-9A For 230V CC motors ...................... 16.00 

Lubrication Supplies 

MSl0005 Foredom Motor & Handpiece Oil 

in hypodermic dispenser .................. $3.75 

MS'|0010 Foredom Motor & Handpiece Oil in 2 oz. container 3.00 

MSl0006 Foredom Flexible Shaft Grease in 1 oz. container 3.50 

Motor Connector 

UAl I lP 

Motor Connector for Series TX, SR, t CC, L, U, 

PG and PGX motors $3,00 

Base and Yoke Assembly 

Turn your hang-up style motor into a bench top model 

with the cast iron Base and Yoke Assembly. lt is easy to 

install and includes mounting screws. 

UAl0451 Base & Yoke Assembly for Series TX, TXH, 

SR, SRH, LX, LXH, PGX, and S motors $45.00 

Replacement Shafts and Sheaths 

lnner Shafts 

s-93 Inner Shaft for Series TX SR (1/6 and I i8 HP), LX, PGX 

L, PG, t CC, R, and K motors.............. .... $9.00 

s-96A Inner Shaft for Series EE geared motors........................... 9.00 

s-97 lnner Shaft for Series F motors.,......... ..... 9.00 

Outer Sheaths 

S-77 Standard Material Outer Sheath that comes equipped 

on all motors except Series L, PG, LX, PGX, EE, and F $13'00 

S-80 St'd Material 0uter Sheath for Series EE geared motors 13.00 

S-82 St'd Material 0uter Sheath for Series F motors............. 13'00 

S-77N Neoprene Material Outer Sheath that comes equipped 

on Series L, LX motors and is optional for all other motors 

except Series EE and F 

.................'.."....14.00 

5-76N Neoprene Material 0uter Sheath for PG & PGX motors 14.00 

Supplies for Heavy Duty Series SRH, TXH, and LXH 

Heavy Duty Shaft, Sheath, and Complete Assembly 

S-10823 Inner Shaft for Series SRH,TXH & LXH motors............ $17.00 

S-10801TX Outer Sheath for SRH, TXH & LXH moton includes 108'19 42'00 

S-10819 Silencer for Series SRH, TXH & LXH motors ..........."...... 10.00 

5-10816TX Complete Assembly (10823, 

I 0801 TX & 10819) ...........". 58.00 

Supplies for Series H 

Heavy Duty Shaft, Sheath, Complete Assembly and Motor Brushes 

S-10805 Inner Shaft for Series H rn0tors.......... . $17.00 

5-10802A 0uter Sheath for Series H motort includes 10822 .....".." 40'00 

5-10822 Silencer for Series H motors ......,...... ..... 10'00 

5-108048 CompleteAssembly (10805,10802A & 10822) .'...'..... 56.00 

MP20'l9P Motor Brushes for Series H motors - Priced Per Pair .'...'... 8.00 

Trigger Switches for Foot Controls 

Slip Joint Shaft, Sheath & Connector 

205J 

CPl0857 FCT-1/sCT-1 Trigger Switch (115V).......................... Foredom's Slip Joint Handpieces fit on European 

$10.00 

machines with "slip 

Slip Joint 

joint" connections (see pg. 13). 

CP11251 TXR-1/sXR-l Trigger Switch (115V)........................... 10'00 To use slip joint handpieces on Foredomotorg replacet'"'".d 

CP11027 FCT-2/SCT-2/FCH-2 Trigger Switch (230V), 

our standard shaft, sheath, & motor connector with the 

TXR-2/SXR-2, and SCH-2 Trigger Switch (230V)........ 10'00 I 08 1 Complete Conversion Assembly, or order the 

Motor Brushes 

Priced Per Pair. Suitable 

for 115 & 230V units except where noted. 

MP319P Pair of Brushes for TX, TXM, TXB, Series TXH, TXMH, and 

TXBH, Series LX, LXM, and LXB, Series LXH, LXMH, and 

LXBH, and Series PG motors ................................. $11'00 

MP'|32P Pair of Brushes for All New 1/6 HP Series SR, SRM, 

SRB, and Series SRH, SRMH, SRBH motors................. 8'00 

MP262P Pair of Brushes for BL, BL-1, BL-1A, and BL-2 ............. 8.00 

MP2019 Pair of Motor Brushes for 1/8 HP Series SR, SRM, SRB, 

S. SM, SB motort H, HM, HB. and Series K motors 8'00 

MP119P Pair of Brushes for CC, MM, DD motors 1'15 V only 8'00 

MPl17P Pair of Brushes for CC 230 V and R, RB, EE, MMG 

and GG motors. ........ 8'00 

MP229P Pair of Brushes for B&G Models 1 & 5, 

and Series F motors........... ................ 9.00 

UA540 if you already own a slip joint style shaft & sheath. 

Handpiece 

\ 

',. 

O-\10811 

LOnversr0n AsSemDIy 

S-1081 1 Complete Conversion Assembly 

(includes S-1 0810A European style shaft and sheath and 

UA540 Motor Coupling and Connector Kit $135.00 

S-10810A European style shaft and sheath ...""..... 125'00 

UA540 European Motor Coupling and Connector Kit ..."....,.."...16'50 

Supplies for No. 210 Sharpener/Honer 

3M Finishing Film Replacement Pads with aluminum oxide 

abrasive (priced each); 

A-HLD3 3 micron, 4,000 grit 

A-HLD5 5 micron, 2,500 grit 

A-HLD9 9 micron,1,200 grit 

A-HLDI5 15 micron, 800 grit 

A-HLD3O 30 micron, 400 grit 

A-HID60 60 micron, 220 grit 

$1.7s 

1.75 

1.75 

1.75 

1.75 

1.75 

V 

0rder by Part Number Shown in Red 

16

Colleb and Supplies for Handpieces 

Order by Part Number Shown in Red on Each Page 

ColleB For Handpieces 8,8D,85, 28, and 28SJ 

HP600 Set of 4 Collets (see below) . .. . $25,00 

HP601 l/32'(.8mm)Collet ... 7.00 

HP602 1116' (1.6mm) Collet . . . 7.00 

HP60 3/32' (2.35mm)Collet .,...... 7.00 

HP604 1l8'(3.18mm) Collet . .. 7,00 

HP605 3mmCollet(NotinKit) ........ 7.00 

(Ihe HP605 Collet is not included 

Collet set HP600) 

Coffets For Handpieces 43T,44,44T,44T51, and 44HT 

Also for use in Adapters CHA-4 and CHA-5 (see pages 24 and 26) 

HP440 Set of 7 Collets (see below) . . . $45.00 

HP441 1116' ('l.6mm) Collet . . 7.00 

HP442 3132' (2.35mm) Collet .......... 7.00 

HP448 3mmCollet . ...7.00 

HP443 118'(3.18mm)Collet . .. 7.00 

HP444 5132'(4mm)Collet .... 7,00 

HP449 6mmCollet . ...7.00 

HP447 114' (6.35mm)Collet. ..7.00 

HP445 3116'(4.8mm) Collet (Not in Kit) ..7.00 

(The HP445 Collet is not included 

Collet Set HP440) 

Points for I 5 and 15D Handpieces 

HP101 77 

HPl 0212 

A-RI 5PT 

AnvilPoint 

CarbideSglus 

Pav6 Point 

...$4.00 

....,..29.00 

.... 19.50 

Handpiece Accessonbs 

Collets For Handpieces 25 & 25H,35, 35SJ 

HP103000 Set of 5 Collets (see below) ,!.!,,...............,.,,,..,, $79.00 

HP1031 16 1/'l 6" (l.6mm) 

Collet ......................... 17.50 

HP103115 3/32" (2.35mm) Collet ...................... 17.50 

HP103114 1/8" (3.18mm) C01|et ........................ 17,50 

HP]0313 3/16" (4.8mm) Collet ......................... 17.50 

HP1031 12 1/4" (6.35mm) CollEt ......................... 17.50 

HP103124 3mm Collet (Not in Kit) ..................... 17.50 

HP103126 4mm Collet (Not in Kit) ..................... 17.50 

HP103119 6mm Collet (Not in Kit) .....................17.50 

(l 03124, 1031 26 & 103 19 are not included 

Collet Set 103000) 

Other Handpiece Supplies 

HP72' Chuck keyfor Handpieces 30,30SJ,30H, and 25C and 

JCA-I and JCA-2 ChuckArbors ............. $2.50 

HPl 0420 Chuck key holder for Handpieces 30, 30SJ, & 30H .............. .50 

HPr 0586 Wrench Assy. for Handpieces 8, 8D and 8SJ ............. 3.00 

HP1 0588 Pin and chuck wrench for Handpieces 28 & 285J ...........3'00 

HP66 Pin with spring & chuck wrench for CHA4 and CHA-5 

Collet Holders .......... 6'00 

HP67 Pin & chuck wrench for Handpieces M,449, & 44H ...... 3.00 

HPl 0311 7 Pin & chuck wrench for Handpieces 35, 35Sl 25, 

25H, 43I 44T, MTSJ, and rMHT..,.................................. 

3.00 

HP5238 3/8" spanner wrench for Handpcs 52, 53 and 52SJ 1.30 

HP76 Duplex Spring ........... 5.00 

HP76B Package of 12 Duplex Springs ................................. 66.00 

HP7O3 Collet for Handpieces 18, 18D and 

'l8SJ ................ 26.50 

HP3-1 008 Collet for 20 Handpiece with 1.5mm hex key ........... 9.50 

HP5001 2 Wrench for 50 Chisel Handpiece ...... 2'50 

#0 Chuck Key 

in Plastic 

Molded Handle 

Ihe comfortable plastic handle makes accessory changes easier and 

the key more difficult to misplace. Comesupplied with Handpieces 

30@, 30H, 30SJ, and 25C. 

A-AT-1 $2.9s 

Handpiece/Accessory Tray 

This handy tray has compartments 

for holding a handpiece 

small 

accessories. Helps to tidy table 

top clutter and to secure items 

that are easy to misplace. 

51/2" w x4" dx3l4" h 

(Burs and handpiece not included) 

Handpiece Holder for 30',43L and 44T Handpieces 

HPG.3O 

$1.9s 

Handpiece Grip 

this 1/8" thick rubber cushion 

provides an added layer of 

comfort to Handpieces 30' 

305J. Grip slides on easily 

but holds firmly. 

(Handpiece not included) 

MAHH-30 $39,00 

Handpiece Holder for 30o, 30H, 

30Sl 43T, M, MI, and 44HT handpieces. 

Allows you to bring the 

work piece to the tool, instead of 

the other way around. Comes with 

handpiece clamp, rod, and BC{ 

clamp (see page 18 for more 

details on BC-1), 

(Handpiece not included) 

17

Motor Hangerc 

0rder bv Part Number Shown in Red 

Conveniently 

suspend 

hang-up 

style motors 

and other 

power tools 

above the 

work bench, 

allowing 

ready access 

to your work. 

Double Motor Hangers 

MH-3 and MH-4 Double Motor 

Hangers have a T-rod at the top for 

hanging two motors, and feature 

full swivel and locking screw. Both 

come with HR-2 Handoiece Rest. 

MAMH-3 with BC-1 clamp 

$49.00 

MH-3 comes with the BC-1 

mounting clamp, shown below left, 

for attaching to bench tops. 

MAMH-4 with BC-2 base 

$59.00 

The MH-4 comes with base 

BC-2 shown here and at right, that 

screws to too or side of bench. 

MABC-2 Base 

$30.00 

The BC-2 screws or bolts to 

side or top of bench for 

permanent mountrng. 

Holds all motor 

hanger & handpiece 

holderods. 

L 

Standard Motor Hangers 

MAMH-5 with BC-1 clamp 

$39.00 

The MH-5 comes with the 

BC-1 mounting clamp, shown 

here and below for attaching 

tn honrh 

fnn< 

MAMH-6 with BC-2 base 

$s9.oo 

The MH-5 comes with base 

BC-2 shown at right, that 

screws to top or side of bench. 

Both come with HR-2 

Handpiece Rest shown at right. 

MAHR-2 Handpiece 

Rest $8.00 

The HR-2 

slides onto your 

Foredom' 

other 

motor hanger wilh a 1/2" 

or smaller diameter pole 

and secures your handpieces 

when not in use. This handy 

item has been re-designed for 

holding two handpieces 

motor cords-a perfect 

attachment for the double 

motor hanger. 

. Swivel 

-Motor & 

t 

MABC-I Bench Clamp 

s15.00 

The BC-l clamps to any bench 

uDlo2t/t" thick and holds all 

motor hanger and handpiece 

holder rods. Acceots motor 

hanger rods 1/2" or smaller. 

v 

HR-2 

Handpiece 

Telescoping 

Motor Hanger (right) 

MAMH-7 $29.00 

The MH-7 has a telescoping 

design for easy height adjustment. 

The pole screws allow the 

user to adjust motor height and 

to swivel motor position. Comes 

with a permanently fixed 

mounting base and 3 screws for 

attaching to bench tops. 

L 

18

Dfill PfgSSgS order bv part Number shown in Red 

I 

( 

The DP95, DP39, and 

DP30 are designed for use 

with Handpie..5. 3Qo, 30H, 

44,44T, and 44HT* matched 

with any Foredom. flexible 

shaft machine. 

The DP-95 is great for use in 

drilling and wax modeling 

applications with Series TX, 

1/6 HP SR and X motors. 

It converts your flexible shaft 

machine into a precision drilling 

and wax modeling tool. 

DP95 Features: 

. Dial indicator measurable in 

millimeters for setting drilling 

P.DP95Precision 

Drill Press 

$295.00 

P-DP39 DrillPress $239.00 P-0P30 DrillPress $169"00 

Has same dial indicator and adjustable 

head with locking mechanismconverts 

your Foredom' flexible 

A rugged and precise stand which 

as the DP-95 for precise hole drillingshaft 

power tool into a drill press. 

and milling applications. The work The sturdy, all metal stand is fully 

holding table moves up and down adjustable, has a 2" throat capacity 

on post or can be swung away for and a stroke length up to 1%". 

drilling large pieces. 

l 

||r 

ft 

*} 

MiniVises 

NEUI' 

Zinc die cast mini vise firmlv 

Plastic Mini Vise is great for holding 

graspsmall workpieces for precision 

drilling on the table top. 

gemstone, shell, and other materials 

"v" 

that require water during the drilling 

Has horizontal and vertical 

or shaping process. 

grooves for holding small round 

pieces, and slots in base for mounting 

to drill press table slots. 

Exterior dimensions closed: 

41/q" long x 3%" wide x 1%" high. 

(Mounting hardware included.) 

Exterior dimensions open: 

Exterior dimensions closed: 41/a" lonsx31/e" 

6" long x 3%" wide x'l%" high 

wide x 1%" high. Exterior dimensions open: 6" long 

faw width- 13/q" )aw capacity- 15/e" Jaw height- %' 

x 3%" wide x 1%" high. Jaw width- 13/rc" Jaw capacity- 

11/2" Jaw height- %" A'F37200 $22.50 A-F3?210 $8.75 

Soff Jaws" 

Soff Jaws bench vise pads attach to any 3" to 4" vise with magnetic strips. They have cushioned pads made of leather or resilient ethylene vinyl acetate 

that grip odd shapes and prevent marring of polished or painted surfacet and threaded parts. 

A-Sf35 

Soff 

Vinyl 

Acetate 

$7.95 

A-Sf35t 

Soff Jaws 

Leather 

$r.gs 

r9

POWefGfaVef @ Kit and ACCeSSOfieS order bv part Number Shown in Red 

K.2293 $495 Available in 230V at same price, Please specify K,2293-z 

ldeal for Bead, Prong, Channel, Hammer and Bezel Setting, Engraving and other Decorative Work. 

The PowerGraver provides a power assist to stone setting and 

engraving operations. The 2293 PowerGraver Kit is a dedicated 

system with specialized components- 

Kit 2293 lncludes: 

PGX Permanent Magnet Motor 

No. 9D Handpiece 

Collet Nos. 602 (1116') 

603 (3/32' 604 ), (1 

and 605 (3mm) 

EMGX Dial Speed Control 

FCG 0n/0ff Foot Switch 

Grease, Handpiece 0il 

DVD and Accessories shown at right 

Kit K.2295 $4ss.00 

Includes all product listed abovg except has TXR-1 foot control 

(shown below) in place of EMGX Dial Control and FCG Foot Switch. 

Kit K.229s-2 (230V) $4ss.00 

Includes all product listed abovexcept has TXR-2 foot control in 

place of EMGX Dial Control and Foot Switch. See page 5 for power 

plug option required. 

It's new permanent magnet Series PGX (formerly PG) motor is 

designed for high torque/low speed applications with permanently 

lubricated ball bearings for quiel trouble-free performance. 

The 9D handpiece works and feels like a hand engraving tool with 

the added advantages of greater control and the ability to adjusthe 

impact force. 

The unit comes equipped with a special, extra flexible neoprene 

sheath and a 6' long power cord. 

Accessories lncluded 

10215 Carbide Stylus 

10177P Anvil Point 

Set of 4 Gravers: 

A-G91 #52 Round 

A-G92 #3 Onglette 

A-G93 #2 Bevel 

A-G94 #40 Flat 

2 Year Warranty on Powercraver Motor 

in Kit 2293: 

& 

PowerGraver Kit Components 

C.EMGX Dial Control $75.00 

Kits K.2293, K.2293-2,K.2295, and K.2295-2 

These kits may be ordered withouthe set of 4 gravers, engraving 

and anvil points at a savings of $30.00. Add CPOPIION 91 to end 

of part number when orderinq. 

optionalPav6 Diamond i,r, ffi 

with 3/32" shank A-Rl5G $19.50 

Optional Foot Speed Control for PowerGraver 

C.TXR-I Speed Control $55.00 

For use in place of EMGX and FCG 

with PGX Motor. 

For 230V model please specify 

c.TxR-2 $5s.00 

The PowerGraver DVD is also available separately 

A.DVD 125 $4.9s 

A DVD with 32-minutes of instruction for using the 

PowerGraver is included, along with a set of acces- 

: sories and maintenance items. 

M.PGX Motor $215.00 

Quiet, smooth running, permanent 

magnet motor with 36" 

Neoprene Flexible Sheath. 

Full Two Year Wananty 

H"9D Handpiece $175.00 

C.FCG 0n/0ff Foot Switch 

$25.00 For use on 1 5V ano 

230V. See page 9. 

This chuck type handpiece has a special quick disconnect that fits only 

the PGX motor sheath. lt has an adjusting ring that changes the impact 

force and a palm resthat provides the comfort and "feel" of a hand 

engraving tool. Comes with 1/16", 382" ,3mm and 1r8" collets. 

20

o 

NEW Micromotortrushless High Torque, High Speed 


Brushless, High Torque, High Speed Micromotor Kit K.l050 $1095 

1,000 to 50,000 RPM 

Two Year Warranty 

on 1050 Micromotor 

The 1050 Micromotor features high torque throughout the speed range of 1,000 to 50,000 RPM. High speed providesmooth, clean, and sharp detailing in 

metal and wood. lt's also great for bright-cutting, grinding, finishing, texturing, and polishing. Medium speed is for effortless and fast stock removal in wood, 

diestone, or acrylic. low speed offers extra control and power for stone setting and milling. 

1050 Brushless Micromotor Kit lncludes the MH-l 50 Handpiece, HP4-717 Control, HP7-7060 Variable Speed Foot Control, Handpiece Cradle and Spare Fuse. 

Available at same price in 230 Volt. CE marked. Specify K.l050-2 and power plug option required (see page 5). 

Brushless Micromotor Handpiece H.MH'I50 $600.00 

HP4-717 Control Box $470.00 

50/60 Hz, 4.0 Amps, 5.4" wide, 

9.1 

" deep, 7" high 

Specifications: 6.3" overall length, replace carbon brushes. Comes with 

.51" grip diameter; 1.06" motor dia. 2.35mm (3i32") collet. 

8.4 o21237 .7 gr., DC32Y 11 .24 

Continuous Torqueivvatb 0utput-5oZ. Replacement Collets for 

in (mNm35)/110. 

MH-150 Micromotor Handpiece 

Features a brushless motor design with 2.35mm (3/32") Collet HP7-5008 $30.00 

a high torque motor that is powerful 3mm Collet HP7-5006 30.00 

even at minimum speeds. The sealed 

1/8" (3.l8mm) Collet HP7-5007 30.00 

housing eliminates dust, noise, and 

vibration. and there's never a need to Handpiece Cradle 

HP7-7060 $60.00 

Variable Speed Foot Control 

Front Panel Features: 

Dial speed control sets precise speed 

and toroue 

Auto cruise 

Fonruard or Reverse rotation 

Dial or Foot speed control 

Digital display for precise speed and 

torque settings 

Built in overload protection 

This foot pedal speed control comes in 

the 1050 kit and is used (in place of the 

manual dial on the control box) to vary 

the speed from 1,000 to 50,000 RPM, 

21

Micromotorllammer for Stone Selting & Engraving 


Stone Setting and Engraving Micromotor Kit K.l080 $ISS.0O 

One Year Warranty 


The 1080 Micromotor is ideal for stone setting applications, including channel setting and engraving techniques requiringAccessories 

included in Kit '1080 

a hammering action. The hammer action does not engage until light pressure is applied. This feature allows the user to 

3-Anvil Points with Threaded Shanks 

locate the tool tip exactly without marring the workpiece, and prevents unexpected action until ready to work. The force p/n HP10177K $4.00 each 

of the impact can be adjusted from light to full by turning the metal ring while the motor is off or running. The speed of 

l-Adapter for Threaded Anvil Point 

the hammer action can also be varied from 0- 5,000 strokes per minute with the manual dial on the control box. Used p/n HPHE-32 (installed) $29.50 

with the Graver Holder; see below the MH-01 Handpiece becomes a precision, power engraver- no need for an air 

1-Adanter for Non-Threaded Shank 

compressororaflexibleshaftdrive.KitlncludestheMH-01 l HammerHandpiece,HP4-917 Control,HS-214Graver Accessories p/n HPHS-35 $29.50 

Holder, Handpiece Tray and Accessories. 

1-Graver Holder with Allen Key pin 

Micromotor Reciprocating Handpiece IIPMH-O11 

fiPH8-214 $19.00 

$500.00 

1-5mm Open End Wrench p/n 

HPHS-38 52"25 

Accessories Tray p/n A.AT-I $2.95 

Handpiece Cradle p/n HP4-933 56.00 

Spare Motor Brushes p/n HPL4-504 

$r9.50 

6Vq" overall length, 9/'16" grip dia., I " motor dia., 13 oz1369 gr. 1 .5 amps (11 5V) .75 amps (230V) 

2-Pins used to tighten Anvil Points 

Has a slender, contoured grip and impact adjustment ring for precise hammering work. Operates from 0-5,000 strokes 1-Anvil Point Holder used for shaping 

the ooint. 

oer minute. 

t 

Graver Holder HPHS-214 $19.00 

Graver Holder H8-214 screws into the front 

end of the MH-01 Handpiece 

converts 

it into a power engraving tool. Comes with 

5i64" allen key. (Graver not included.) 

Dual Handpiece Micromotor Kit with MH-l70 and MH-011 Handpieces K.1090 $959.00 

Ihe '1090 is the ultimate micromotor kit Kit 1090 Dual Handpiece 

for accomplishing practically every job. lt Micromotor Kit Includes: 

includes the comolete contenb of the 

Control Box-HP4-917 $200.00 

1070 Rotary Kit with the MH-l70 handpiece 

(shown opposite page), plus the 

Rotary Handpiece -H.MH-r70 $220,00 

with 2.35mm (3/32") Collet 

MH-01 reciprocating handpiece with 

Reciprocating Handpiece-HPMH"01 t $600 

all of its accessories. The control box has 

Variable Soeed Foot Control-llP4-960 

a single receptacle on front panel for 

$60,00 

connecting one handpiece at a time. 

Handpiece Cradles (2)-HP4.933 $6.00ea' 

One Year Warranty. 

See Kit '1070 

All Accessories that come with MH-011 

listing for details. including the Graver Holder $106,70 

Spare Pair of Motor Brushes, Spare Fuse, 

Prices shown at right are for individual 

Collet Changing Wrenches $16.00 

components when purchased separately. 

\' 

22

Micromotor- High Speed Rotary Handprece 

Rotary Micomotor Kit with Variable Speed up to 38,000 RPM 

K.r070 $399.00 

Order by Part Number Shown 

in Red 

OneYearWarranty 


'l 

The 070 is ideal for high speed applications up to 38,000 rpm, including light debuning of cast pieces, bright cutting in jewelry making, and fine detailing in woodcarving. 

Compared to flex shafts, micromotors have much less torque. However, the higher speed results in a comparable rate of material removal with a lighter touch. 

The simple coil cord connection between the handpiece motor and control box is another key advantage. Unlike the "drag" and restriction in motion you have with a 

shaft and sheath, micromotors offer much qreater freedom of movement. 

1070 Micromotor Kit lncludes: H.MH-170 

Prices below are for individual components 

when purchased separately. Rotary 

High Speed 

Handpiece*l.MH-1 70 $220.00 Handpiece 

with 2.35mm (3/32") Collet $220.00 

Control Box-llP4-917 $200.00 Specifications: 6.2" overall length, 5/8" grip diameter, 1 " motor diameter,7.3 ozJ208 gr., DC30Vi1.2A CE marked 

Variable Speed Foot Control- Continuous TorqueMatts Output-3o2. in (mNm2l)/60 

HP4-960 $60.00 

It has a slender; contoured grip for precise and very high speed work and a quick release rotary type chuck. lt should be used 

Handpiece Cradle{lP4-933 

with 

$6.00 

accessories rated for at least 40,000 RPM. Fan cooled, brush type continuous duty motor runs cool and vibration-free 

and permanently lubricated, shielded ball bearings require no lubrication. 

Spare Pair of Motor Brushet Spare 

Comes with 2.35mm (3/32") 

'l18" 

collethat is easy to install and change with supplied collet changing wrench. Optional and 

Fuse, Collet Changing Wrenches 

3mm collets are available (see below). 

The compact Control has switches on 

the front for 0n/0ff Power. Fonruard or It also has receptacles for the 

Reverse Rotation. and Manual or Foot Variable Soeed Foot Control and 

Speed Control selection. Speed can be an Optional 0n/0ff Foot Switch 

adjusted from low to full speed using (see below). 

the dial on the box. or with the foot 

Bur changes are quick and easy 

pedal. An 0verload Protector Light 

with a simple twist of the front 

turns red and sounds a beeping alarm 

section of the Handpiece. A 

when the motor stalls. 

Cradle is supplied for the handpiece 

when not in use. A selec- 

The back of the control has a convenient 

voltage selector switch for operating 

with either 1101120 or 2201240 able separately for simplifying 

tion of collet adaoters is avail- 

volt. The control converts AC currento changes between accessories 

DC current required for the handpiece. with different size shanks. 

Replacement Collets and Motor Brushes for MH-l70 and discontinued 

MH-145, MH-145A, and MH-l35 Micromotor Handpieces: 

2.35mm (3/32") Collet (st'd size) 

3.18mm (1/8") Collet 

3mm Collet 

Motor Brushes (Pair) for MH-l70 

Motor Brushes (Pair) for MH-145A 

and MH-l35 

Motor Brushes (Pair) for MH-l45 

HP4-117 

HP.t-t178 

HP4-117C 25.00 

HP4-163 16.00 

HPL4-504 19.5C 

HPt4-3&4 

$26.00 

26.00 

19.5S 

Optional On/Off Foot Switch 

HP4-927 $25.00 

This control is available separately 

and does not come in the kit. lt 

plugs into the back of the control 

box and allows you to turn the 

motor on and off without changing 

the speed set by the dial. 

Adapter Collets $15.00 ea 

Use collet adaoter with smaller 

shank size accessories without 

having to change collets. 

HPL4-3233 

nPt4-3234 

HFt4-3e35 

HPt4-3236 

HPt4-3237 

3132" to 1/16" 

1r8" to l/16" 

3mm to 3/32" 

118" to3132" 

3.0mm to l.6mm 

23

BL BenCh l-athe 1/6 HOrcepOWef orderhy partNumbershownin Red 

Bench Lathe with Tapered Spindles M.BL $199'00 

Powerful variable speed bench lathe in a compact size suitable for use at the 

workbench. lts permanent magnet motor is extremely quiet and smooth running 

with all the power and speed required for a variety of polishing and buffing 

jobs. Cast iron base has mounting holes and suction cup feet for a secure 

Lathe ACCeSSOfieS 

ff 

Tapered Spindles $t0 ea. 

A-TM5 left side for 5/16" shaft A-TM5 right side for 5/16" shaft 

A-TM3 left side for 1/4" shaft 

A-TM4 right side for 1/4" shaft 

For left and right hand mounting of buffs and wheels up to 4" dia. Also for 3M 

ScotchBriteTM Radial Bristle Discs 

s*+f 

and FX Wheels with pre-mounted Spindle Adapters. 

Plastic Spindle 

Adapters $2.00 ea. 

A-4562 left side 

A-456t right side 

For left and right hand mounting of buffs and wheels up to 4" dia. with 3/8" 

arbor hole. Also for 2" and 3" Scotch-Brite" Radial Bristle Discs from 3M. 

hold on the work surface. Lathe comes with theTM5 (left hand) &TM6(right 

hand) Tapered Spindles for holding buffs and brushes up to 4" (100mm) in 

diameter. Other lathe accessories are available separately and shown below. 

Available at same price in 230 Volt. CE marked. Specify M.BL-2CE and 

power plug option required (see page 5). 

collet Holder 

rq 

i{-ffi{ffi.1.Ji,{"}:'j#*.n 

T 

rntpt Collet horrrer holder nn on arhoromes 

arbor comes 

with 

5 o"' L 

3132',118'and l/4" collets, allen key, 

and pin & wrench for mounting 

various size shank mandrels, sanding 

drumt etc. For use only on right hand side. See page l7 for additional collets. 

Chuck Arbor 

$45 ea. 

A-JCA-2 right side for 5/16" shaft 

A-ICA-I right side for 1/4" shaft 

Arbor adjusts to hold accessories with 

shank from G-5/32". Comes with chuck 

key. For use only on right hand side. 

Hub Adapter for 

Tapered Spindles 

A-4568 $4.95 ea. 

For left and right hand mounting of FX Wheels from 3M and other wheels with 

'1" arbor holes. Use on BL lathe spindles and standard tapered spindles. 

Dust Collector Hood MADCH-I $49 ea 

Hoods are made of heavy gauge sheet metal construction with non-skid pads 

on the bottom. Has21l/' (64mm) adapter that fits most collection system hoses. 

6%" (165mm) high,4s/a" (lt 7mm) wide and 8%" (2l9mm) deep. 

Wheel Mandrels $15 ea. 

A-WM-5 left side for 5/16" shaft A'WM'6 right side for 5/16" shaft 

A-lilM-3 leftsidefor 1/4" shaft 

A-WM.A right side for 1/4" shaft 

Hold rubber bonded abrasive wheell grinding stonel sanding drums, brushes and 

other accessories with 1/4" center mounting holes up to 3/4" thick. 

24

BL Bench l^athe Kits .:,,i:., ;: 1 i 

t mrr- 

w:- 

w 

w 

* : 

, i'.'ll' 

.l::,lirr 

:i.:ii. :ri:l'i :]::,rli::, 

lncludes BL Lathe with TM5 and TM6 Tapered Spindles and two DCH-] Dust Hoods 

Also available at same price in 230V Specify l'..:::'il'.!.i :l':l.i 

#"% 

w 

rD 

f, 

n 

OJ 

Kit 3340 includes BL Lathe with TM5 & TM6 Tapered Spindles, CHA-5 Collet Holdet 

with 3/32 

" 118", 

and 1 4" col les, and WM-6 Wheel Mandrel. 

Also available at same price in 230Volt. Specify i. :::r.l,'i .i: r- 

gF 

o 

Ar 

f, 

O- 

:.::: 

k6& 

ff 

J 

\' 

i 

and 

Scotch-Brite'* 

Radial 

Bristle Discs 

:.. . ....::.'. 

Kit with 

ffi 

Kit 3396 includes BL Lathe with TM5 & TM6 Tapered Spindles, plus these 3M 

products: Four FX Wheels (240,600, 1,500, & 3,000 grain with one 4568 Hub 

Adapter), 2" ScotchBriterM Radial Bristle Discs (5 ea. of 400 grit and 1 micron) 

with Spindle Adapters (4561 and 4562). 

r*St 

rxl 

a 

trdg& s 

WeFw 

#il=r 

W.$ . 

ar 

n 

= 

rD 

f, 

fr 

ffi 

Kit 3390 Includes BL Lathe with TM5 & TM6 Tapered Spindles, Bars of Tripoli, 

Platinum White & Blue, and Carnauba Wax, 2-4" buffs (CBF4 and CYR4), 

Four 3" buffs (CBF3, CBC3, CFB3, & LCB3) 

Also available at same price in 230 Volt. Specify :r I :'.', 'r : 

25

FIeXadg fOf BL Lathe 0rder by Part Number shown in Red 

nl rl rr 

3t32' HP42 118' 

1l2x1l2 

112x1 

(13mm x 25mm) 

Collet Holder 

with 3 collets $29 ea. 

A-CHA-S right side for 5/16" shaft 

A-CHA-4 right side for'l/4" shaft 

Collet holder on arbor comes with 

3132' ,118'& 1/4" collets, pin, wrench 

and allen key for mounting variousize 

shank mandrelt sanding drumt etc. 

For use only on right hand side. 

HP443 \14' HP447Collets 

are $7.00 each. 

A-SDt41 

A-SD66r 

A-50143 

1t4' 

6mm 

$4.75 

7.50 

Convert your lathe into a flex shaft 

machine with a 30" long Flexade 

with either a standard or more 

flexible neoprene sheath (see chart 

at right). Any "QD" style handpiece 

can be attached (see pages 10-14). 

Prices are for Flexade only, handpieces 

are sold separately. 

Please specify motor shaft coupling 

size (1t4', 5116',318', or 112"), as 

a 5/16" coupling comesupplied if 

not otherwise specified. 

Standard Neoprene 

Coupling Sheath Sheath 

Size $25ea $25ea 

114' * sBGl4 SB0-14N 

1D' SB0-12 SBG1zN 

3t8' sBG38 sB0-38N 

5l1g'+ 5.8&516 s.BG5't6N 

* For Nos.'l & 5 Bench Grinden and BL 

Lattres with l/4" motor shafts. 

+ For BL Lathes with 5/16" dia. shafs. 

Disc and Drum Mandrcls for llse with CHA-| BL Lathe Attachment 

0ptional collets:3mm HP448,4mm HP444,6mm HP449 $7.00 

3l4x1l2 

(19mm x 

Disc Mandrels for PSA Discs 

hrt No. Dia."i mm Shank Price Ea. 

A-M338 2' t51 1t8' $6.40 

A-M33 2' 151 114' 6.40 

A-M34 3' 176 114' 7.20 

Sanding Drum Mandrels 

hrt No. Shank Price Ea. 

A-SD518" 1t8' $4.00 

A-SD188 118' 

" Dru made of hard plastic 

3.70 

1t4" $3.7s 

PSA Discs andSanding 

Bands available for use with 2" and 3" 

disc mandrels and sanding drum mandrels: 

"simply 

Ceramic Purple by3M 

the best" coated abrasive for 

sanding and finishing wood, metalS 

fiberglasq diestone, plastics, and more. 

3M's CubitronTM ceramic aluminum oxide 

mineral sharpens ibelf with use, creating 

new cutting edges that result in longer 

life- 2 to 4 times longer than traditional 

aluminum oxide and faster stock removal 

with less heat and loading. 60, 80, 120, 

and 220 grit. Discs come with and without 

pressure sensitive adhesive. 

Trizact" by 3M 

Sanding bands and discs made ofTrizact* 

coated films are produced witt 3M 

"microreplication 

technology". Ihey have 

tiny pyramids on their surface that ensure 

a fast and consistent cutting rate with 

uniform finishes. the aluminum oxide 

abrasive is canied in a plastic matrix and 

is available in a range of grades or grits 

from 220 to 2500, they can be used wet 

or dry on all metals to remove metal, 

smooth or pre-polish metal and glassurfaces 

and sharpen chisels and gravers. 

3l4x1lz 

AluminumOxide 

by 3M 

A-50145 

A.SD345 

114' 

5mm 

$8.00 

8"00 

A.SD147 1t4" $5.00 

26 

Aluminum oxide sanding bands and 

discs are made of high-grade mineral 

and a bonding system that reduces 

shelling of the mineral. Ihese economical 

abrasives are excellent for fast clean-up 

and pre-polish work. Discs available with 

PSA backing or arbor holes and bands in 

various widths and lengths. Grib from 

60 to 220.

AIISet' for Stone Setting 


Speeds Up Stone Setting Production, 

Increases Accuracy and Precision. 

With AllSet jewelers have reduced the time spent setting stones by 75 percent! 

A setting that mightake up to 8 hours by hand can be done in just 2 to 2% hours. AllSet 

speeds up production time and can improve the precision and strength of the setting. 

AllSet Master Stone Setting Kit 

AK820 $495.00 

lncludes: 

No.30o handpiece 

with chuckey 

AllSet Basic Guide 

Assembly-L-bracket 

with shaft, body, 

collar, and allen key 

13 Prong-Setting 

Guides (AK827) 

3 Channel-Setting 

Guides (AK827) 

7 Pav6-Setting Guides (AK833) 

Easy-Cut Prong Set (AK847) 

Extra L-bracket for quick guide change 

lnstructional DVD and manual 

Avaihbb with No.30SJ Handpiece in place of No. 30o at same price. 

Please specifu AK820SI- 

AK825 $445.00 Includes all items abovexceptNo.3@and chuckey. 

The patented AllSet@ Basic Guide 

Assembly is a lightweight attachment that 

becomes part of a Foredom No. 30' 

handpiece and provides precise, repeatable, 

easy-to-perform stone setting results. 

AllSet kits and components are are quality 

manufactured in the USA of highly durable 

materials and are versatile tools that stand up 

to multiple demands and configurations. All of 

the cuttinguides are made of the highest 

quality stainless steel for a clean finish and a long, 

rust-free life. 

One Year Warranty on AllSet Attachments. 

AllSet@ Basic Guide Assembly 

Consists of L-bracketwith shaft 

30 min. DVD by co-inventor, 

Jeff Mathews, comes in the master 

stone setting kits and is also 

available separately: 

A-DVD 125 $4.95 

Specialty Guide Kits and Sets 

Specialty Guide Kits include the Prong, Channel or Pav6 Guides plus the Basic GuideAssembly (L-bracket with 

shaft, body, collar, instruction manual, and allen key). Specialty Guide Sets do not include the Basic Guide 

Assembly which is required for operating the AllSet. 

I 3 Prong-Setting Guides 

3 Channel-Setting Guides 

7 Pav6-Setting Guides 

Easy-Cut Prong Guide 

Prong Kit AK826 $179.00 

Includes 13 prong-setting guides 

and AllSet Basic Guide Assembly. 

Locking nut, Allen wrench and 

instructions. 

Prong Set AK827 $99.00 

Includes 13 prong-setting guides 

Channel Kit AK828 $17S.00 

Includes 3 channel-setting guideq 

(small, large for baguette and knifeedge) 

and AllSet Basic Guide 

Assembly. Locking nut, Allen wrench 

and instructions. 

Channel Set AK829 $99.00 

Includes 3 channel-setting guides 

Pav6 Kit AK832 $179,00 

Includes 7 pav6 guides and AllSet 

Basic Guide Assembly. Locking nut, 

Allen wrench and instructions. 

Pav6 Set 4K833 $99.00 

Includes 7 pav6 guides 

Easy-Cut Prong Guide Set 

AK847 $99.00 

AllSet 2" pron guide table, depth 

and pron guide, guide locking nuts, 

Allen wrench and instructions. Basic 

Guide Assembly sold separately. 

27

WaX C,aruef order by Part Number shown in Red 

K,WC-1 r 15V $189 

K.WC-2 230V $rgg 

with 3 tips (WI-2,WI-3,WI-4 

shown with asterisk*) 

K.WC.3'r15V $229 

K.WC-4 230V $239 

with all 7 tips 

One Year Warranty 

: 

# 

I 

c xS 

* Tips included in WC-l & WC-2. All 7 tips come in WC-3 and WC-4 

Small Straight Curved 

Knife Spoon Taper Taper 

A.WT.3 A-WT-4 A-WT.2 A-WT.s 

$9.95 $9.9s $9.95 $9.95 

I'1 

4, 

Small 

Flat 

A-WT-1 

99.95 

.i..., 

, 

*;; 

Ill.rl 

-.1 

$i 

sl. 

Large 

Flat 

A-WT-6 

$9.95 

s€ 

't 

ffi 

*i, 

3l 

.lr 

4e 

Large 

Spoon 

A.WT-7 

$12.9s 

The Wax Carver Compact Control 

box has a orecision heat control dial 

for setting and maintaining temperatures 

from 95"F (35"C) up to 560oF 

(294"C). Keep it low for delicate 

work or turn it up for fast wax 

removal or carving harder waxes. lts 

flashing indicator light shows heat 

intensity and reminds you to turn it 

off wlen not in use. Only 21/2" x2" 

(64 x 51mm). lt hardly takes up any 

workbench space. You can also 

mount it on a shelf with a piece of 

velcro, as the jeweler did in the 

photo below The cords are all 

removable for easy storage when 

not in use. 

230 volt models come with a 

transformer that has both European 

and British style plugs and is CE 

rated. Specify K.WC-2 or K.WC-4. 

The Wax Carver Handpiece is 

lightweight and comfortable to 

hold with cork insulation to keep 

fingertips cool while working. The 

detachable handpiece cord is also 

lightweight and extremely flexible, 

perfect for the controlled movements 

needed for fine detailing 

tn wax. 

Brass Tips 

Brass Tips are easy to clean and 

change they're a great improvement 

over the tios used on other models. 

You can alter the tips with a file or 

pliers and create your own custom 

shaoes. TheWC-l and WC-2 come 

with three tips indicated above with 

an asterisk. The WC-3 and WC-4 

come with all seven tips. Tips are 

available separately. 

t 

28

Model 4N 

Arch Trimmer 

For Use in Dental Labs 

M.400 $569 

For trimming the palate are and 

outer edge of modelg Foredom's 

Model 400 offers quiet, maintenancefree 

performance. lts durable, high 

torque, permanent magnet motor 

operates 

5,000 RPM. 

A 230 Voh. 50/60 HZ Arch Trimmer is 

also available at the same price. lt has 

an RFI filter and complies with CE 

standards. Model 402 is available 

with Eurq British, Australian, or an 

American type power cord. Specify 

M.402 and plug option required 

(see pg. 5). 

The Arch Trimmer has an easy to 

change bur system with a 1/4" collet, 

chuck nut, and pin and wrench. lt 

comes with an assortment of unioue 

rotary accessories plus a cleaning 

brush and an adapter for a21/2" 

(64mm) dia. hose. The 230 Volt version 

comes with a 6mm collet that 

fits the same accessories as the 

Model 400, but with 6mm shanrs. 

Features: 

Stainless steel work surface 

1" (25mm) dia. dust collection port 

with adapter for hoses 2%" (64mm) dia. 

Heavy duty sealed ball bearings require 

no lubrication 

Eye protection shield 

Fuse protection and'Trip to Off'safety 

switch that stops motor if power is 

intenuoted 

Two Year Wananty 

lncludes New Accessories: 

Two Typhoon@ lungsten carbide burs 

(ball nose and taper) with 1/4" shanks 

Brass cleaning brush 

Two Rubber drum mandrels (straight 

and new 5" taper) with five ea. of 

60 grit and new 220 grit3l4" x11/2" 

3M Purple Ceramic straight sanding 

bands and 2 ea. of 5o taper (14 in all) 

for roughing out and fine finishing. 


DualCut Blades and Saw Frame 

for Cutting Diestone 

"skip" 

Standard 25 regular and 18.5 

Teeth-Per-lnch (TPl). Made in USA 

Available in .010" and ultra thin .007" 

5" pinned blades fit most frames 

including the Foredom Comfort Grip 

Frame shown at right 

Blades cut on both fonruard & back strokes for the fastest cutl 

Specifications Tube of 10 Price Tube of 100 Price 

?li;i|!il'iJirpr DNsssr-10 $4.2s DNsssr-100 $35.00 

SF63535 Comfort Grip Saw Frame 

DN5842-100 $50.00 

Holdstandard 5" pinned blades 

Assortments and Saw Frame 

Part No. 

Offset bow for better view of cutting 

20 Blade Assortment Pack (5 each of above) DN5865 $9.9sipk 

edge and comfortable grip with 

Comfort Grip Saw Frame with FREE SF53535 $15.95/pk 

ergonomic design 

8-Blade Assortment Pack (2 each of above) 

Easy blade changes and tensioning 

We als offer a full range of standard blades that are pinned, plain end, and with holes inthe ends for 5" saws. Request Form 537 for details 

29 

?;i-i?lfiJilpr DNs8s2-10 $6.00 DNs8s2-r00$50.00 

?;i-il?ffi':i#rr,, oruse+:-ro $+.zs 

?;i-l?ih'f irlfr,,, orse+z.ro $e.oo 

DN5841-100 535.00

@ 

uftrasoniccleaners 

Elma is the World Leader in Ultrasonic Cleaning Technology 

Elma ultrasonics are used in industrial, dental, medical, scientific, 

automotive, jewelry, and other fields. Elma cleaners are the most 

powerful with 37 kHz output and durable models made. They clean 

quickly, efficiently, and with maximum effectiveness and carry a 

2 year warranty on all parts and components. 

Features: 

. Self tuning generators with sweep function 

. Stacked Transducers 

. Stainless steel tanks and cases 

. Ceramic heating elements 

. Timed or continuous use & auto 12-hour shut off 

2.8 qt. Dental0ffice Kit 

K.EK-E30H ....$599.00 

Contains E30H cleaner with heating element, timer; stainless steel safety 

basket, and 1 qt, of Elma 85 cleaning concentrate. 

DAE3OH Ultrasonic Cleaner with Plastic Cover Onlv . . . . $549.00 

! 

2.8 qt. Dental Lab Kit 

K.LK-E3oH .... $649.00 

Contains E30H cleaner with heating element, timer, acrylic positioning coveI 

and two glass beakers (600 ml.) with plastic lids, and 1 qt. of Elma 85 

cleaning concentrate. 

DAE3OH Ultrasonic Cleaner with Plastic Cover 

19 qt. Industrial Kit 

K.EK-E180H .. $1,729.00 

Contains El80H cleaner with timer; heating element, and stainless steel 

basket and 1 qt. of Elma 85 cleaning concentrate. 

DAEl80H Ultrasonic Cleaner with Plastic cover onlv $1,495.00 

!t 

@ 

6 qt.lndustrial Kit 

K.EK-E60H ... $1,119.00 

Contains E60H cleaner with timer, heating element, and stainless steel baskel 

and 1 qt. of Elma 85 cleaning concentrate. 

DAE60H Ultrasonic Cleaner with Plastic Cover Onlv . . . . $995.00 

29.4 qt. Industrial Kit 

K.EK-E300H . . $2,169.00 

Contains E300H cleaner with timer; heating element, and stainless steel 

basket and 1 qt. of Elma 85 cleaning concentrate. 

DAE300H Ultrasonic Cleaner with Plasticover Onlv $1,895.00 

a 

w 

13.4 qt. lndustrial Kit 

K.EK-E'|20H 

. . $I,509.00 

Contains E1 20H cleaner with timer; heating element, and stainless steel basket 

and 1 qt. of Elma 85 cleaning concentrate. 

DAEl 20H Ultrasonic Cleaner with Plastic Cover Only $1,295.00 

Order bv Part Number Shown in Red 

30 

A. Elma 85 General Purpose Cleaning 

' 

Concentrate 

DA1098s 

$35.00/qt 

Concentrated: 1 quart yields five gallons. 

Elma 85 is a general purpose cleaning concentrate for 

all metal surfaces. lt removes dirt, grease, and polishing 

comoounds. Elma 85 is free of alkaline and acid substances, 

and is biodegradable and non-ammoniated. 

Combine concentrate with regular tap water. 

For complete details and specifications, request 

Catalog No. 568 or go to wwriv.foredom.com 

2 Year Warranty on all Parts & Components 

Foredom imports, distributes and services Elma units it sells in the USA.

? 

! 

! 

Flexible Shaft Power 

Tool Seledion Guid+ 

Specifications 

Performance Ratings 

Replacement Parts 

Motor Series and Styles 

Special 

Feature 

TX Hang-Up High 

TxB Bench 

Torque 

at All 

TXM Bench with dial control Speeds 

TXH 

Hang-Up 

TXBH Bench 

Heavy 

;:,1"" 

TXMH Bench with dial control sf JX 

Page 

No. 

sR Hang-UP 

Powerful 

SRB Bench All purpose 4 

SRM Bench wittr dial control Reversing 

SRH Hang-Up HeavY 

SRBH Bench 

Duty 

Version 

SRMH Bench with dial control 

o, ,* 

SR CE Hang-Up 

Made 

A Foredom Motor Series 

consists of three models of 

the same motor: 

'l 

1. Hang-Up these require a sep. 

2. Bench I arate sPeed control 

3. Bench with a built-in 

dial speed control. 

Motor 

Specifications* 

I 

, I Hang-Up 

d 

speedcontroroptions 3B::$':3i[i"J 

Replacement Shafts, 

Sheathq Motor BrushesFoot Manual (Qial) 

Series SR, SRH, LX, LXH, and PowerGraver Models are available in both 115 and 230 Volt. Series SR CE is only available in 230 Volt. 

Series TX and TXH are nof available in 230 Volt. 

* Continuous duty/maximum efficiency rating not maximum power output at stall point. 

G 

7 

5 

to CE 5 

Standard 

tX Hang-Up 

High 

LXB Bench Torque 8 

LXM Bench with diat controt Low Speed 

1/3 Horsepower 

15,000 

Max. RPM 

Permanent Magnet 

Ball Bearing 

AmpsAC-3.5 115V 

Watts-250 


15,000 Max. RPM 


Ball Bearing 

Amps AC-3.5 115V 

Watts-250 


18,000 Max. RPM 

Universal Motor 

Ball Bearing 

Amps AC-1 .7 115V 

9 230V 

watts-125 

I /6 Horsepower 

18,000 Max. RPM 


Ball Bearing 

AmpsAC-1 7 115V 

.9 230V 

Watts-l25 

1 /6 Horsepower 

18,000 Max RPM 


Ball Bearing 

AmpsAC- .9 230V 

Watts-l25 


5,000 Max. RPM 


Ball Bearing 

AmpsAC- 12 115V 

6 230V 

Watts-65 


txH Hang-Up 

HeavY 


DutY 


txBH Bench 

a Ball Bearing 

Version r 

AmpsAC- 1.2115V 

LXMH Bench with dial control .6 230V 

Of LX 

watts-65 

PGx 

Power 

PowerGraveF 

Hang-Up Assisted 20 

Engraving 

1 /20 Horsepower 



Ball Bearing 

AmpsAC- 12 115V 

.6 230V 

Watts-40 

93 lnner Shaft 

77 Outer Sheath 

77N 0uter Sheath 

(optional neoprene) 

319P Motor Brushes 

TXR 

SXR 

TXM has dial 

control in base 

EMX 

10823 

Inner Shaft 

TXR EMX 

10801 

TX outer Sheath 

(includes 10819) 

SXR 

10819 Silencer 

'I 0816TX Complete 

Assembly (.10823, 

TXMH has dial 

10801TX & 10819) 



93 Inner Shaft 

770uter Sheath 

77N Outer Sheath 


I 32P Motor Brushes 

115V 

TXR, SXR, 

and EMX 

Amps- 4 

Hz- 60 

TXR, sxR, 

and EMX 

Amps- 4 

Hz- 60 

z30v 

N/A 

N/A 

FCT/FCH EM/EMH FCT & SCT FCH & SCH 

Amps- 4 Amps- 3 

SCT/SCH 

Hz- 60 Hz- 50 

SRM has dial 


10823 

lnner Shaft FCT/FCH 

10801TX Outer Sheath 

(includes 

SCT/SCH 

10819) 


108j 6TX complete 

Assembly (10823, SRMH has dial 

10801 

TX & 10819) 



9J tnner 5nan 

77 Outer Sheath 




9J tnner 5nan 


(neoprene) 


Et\4 EMH 

Amps- 1.5 Amps- 2 

Hz- 60 Hz- 50 

FCT & SCT FCH & SCH 


Hz- 60 Hz- 50 

EM EMH 

Amps- 1.5 Amps- 2 

Hz- 60 Hz- 50 

FCT-2CE N/A FcT-2cE 

Amps- 3 

Hz- 50 

TXR 

SXR 

LXM has dial 


10823 

Inner Shatt 

TXR 

10801 

TX Outer Sheath 

(includes 10819) 

SXR 


10816TX Complete 

Assembly (10823, 

LXMH has dial 

10801TX & 10819) 



93 Inner Shaft 


(neoprene) 


EMX 

EMGX-Dial Control 

FCG-0n/0ff Foot 

Switch 

(TXR Optional Foot 

Speed Control) 

TXR, SXR ard EMX 


Hz- 60 Hz- 50 

TXR, SXR ard IMX 


Hz- 60 Hz- 50 

EMGX 

Amps- 15 Amps- 1.5 

Hz- 60 Hz- 50 

FCG 


Hz- 60 Hz- 50 

\ 

rD X 

o 

rD 

(/) 

OJ 

r\+' 

d q 

L4 

rD 

rD 

n 

o 

f, 

o 

drD 

I 

I oC 

D ar 

f, 

to I 

D rD 

b 

eJ.- 

n 

CI 

= 

o 

f, 

N 

ui 

31

Producf Index and Otdering Info 

AffSet@Guides, Kits and Sets ... ..........27 

Arch Trimmer .....29 

Base andYokeAssembly ........... 16 

Bench Lathe 

Discsand Drum Mandrels ........26 

Dust Collector Hoods .. ..... .. .. .24 

Flexade@ .......26 

LatheAccessories ..,... ......24,26 

LatheandKits ... ....24-25 

Bur Holders ....... 15 

ChiselsforChiselHandpiece-NEW. .........14 

ChuckKey ........17 

Coffetsand Handpiece Supplies ..........17 

Comfort Grip Saw Frame-NEW ... ...29 

Drill Presses ...... 19 

DualCutSawBlades-NEW.... .....29 

DustCollectorHood.. ......24 

DVD's-NEW .......8 

EarPlugs ..........9 

Elma@ Ultrasonic Cleaners ........30 

European style shaft,sheath and motorconnector ........., 5, 16 

FingerTape .........9 

Flexade@Attachment.. .....26 

Flexible Shaft Motor Specification Guide . ........31 

Flexible Shaft Power Tools-Motors and Controls 

LXSeries Motorsand Controls ....,.......8 

LXH Series Motors and Controls ...........7 

PGXPowerGraver@ Kitand Components .......... 20 

5R SeriesCE Mark Motorand Control . ............5 

SRSeries Motors and Controls ............4 

SRHSeries Motorsand Controls ...........5 

TXSeriesMotorsandControls ............6 

TXH Series Motors and Controls ...........7 

Ffexibfe Shaft Prepackaged Kits ... .. ....2-3 

GeneralApplicationsKit-2272 ........,...3 

lndustrialKit-TXH440 .-..........2 

Jewelers Kits-TX300, 2220 and2230 .. .........2-3 

Woodcarving Kits-5200,5240 and 5400 . .......2-3 

Graver Holder ......22 

Handpieces 

Chisel . .........14 

Dupfex Spring ..........12 

General Purpose-NEW ......... 10 

Quick Change .......... 11 

SlipJoint .......13 

Special Use 

Hammer; Heavy Duty, Speed Incredsing, Angle Head 

3 

Square Drive ............7 

Handpiece Grip ... ........17 

Handpiece Holder.. ........17 

Handpiece Supplies ........17 

Honer/SharpenerReplacementPads 

.. .......16 

Lubrication Supplies ........16 

Maintenance, Routine Procedures for Flex Shafts .......... 9 

Maintenance Supplies ...........16 

Micromotors 

Brushfess-NEW ........ 21 

Hammer .. .. ...22 

Rotary . ........23 

Mini Vises-NEW ..........19 

Motor Brushes-Replacement ........ 16 

MotorConnector...... ...........16 

Motor Hangers ..... .....18 

0n/0ff FootSwitch . ........9 

Other ProductCatalogs .....15 

PowerGraver@KitandComponents 

.. .......20 

Resoirator ..........9 

SafetyGlasses ......9 

ShaftsandSheaths-Replacement 

. ..........16 

Square Drive Handpieces .. .. .. ......7 

Soff Jawslur ........19 

Speed Controls- Footand Dial ..........4,6 

230VoltControlPowerCords&Plugs 

.. ......5 

UltrasonicCleaners, Elma@.. ......30 

WarrantyandRepairlnformation .........32 

Wax Carver Kit and Brass Tips . .. .. 28 

! 

ra 

Producf Repair and Wanantyt 

Authorized repair service is available at our factory Send items for repair to 16 Stony Hill Rd, Bethel, CT 06801, marked Attention: Repair Department'. Enclose 

the item(s), a packing lis! your addresg and the best way for us to contact you-phone number; fax, or email address and information regarding the problem or repairs 

required. Estimates of repair cost will be made upon request. lt is our policy not to proceed with a repair without your approval if the cost (labor plus parts) is more 

than fifty percent of the cost for a new replacement. You will be notified and advised of the costo repair and to purchase a new replacement. Please allow 3 business 

days for an estimate to be done and 5-7 business days for repair work to be completed after we receive your approval to proceed. 

2 Year Warranty- For All Flex Shaft Motors and Controlshown in this Catalog/Price List dated September 2007: Series TX and TXH Motors, Controlt and 

KitsTXH440,TX300,5400.1/6HP Series SR Motort Controls, and Kits 2220, 2230,2272,5200,5240 Series LX Motors and Controlt PowerGraver@ (PGX) Motor, 

Control and Kit, Arch Trimmer; Elma@ Ultrasonic Cleaners, and the Brushless Micromotor Kit 1050 

Products with One Year Warranty- Micromotor Kits 1070, 1080 and 1090, Wax Carver, BL Polishing Lathe and Kits, Allset@ Attachments. 

All other Foredom power tools and attachments are warranted to be free of defects in material and workmanship for a period of 90 days from date of purchase by 

the user. These warranties do not cover breakage.or damage caused by accident, abuse, or misuse and repairs required because of ordinary use and wear. Repair or 

replacement will be done at our option if the product is post-paid to our factory We pay the return postage charges for all items repaired under wananty. 

Duplex springs and shafts and sheaths are not covered by warranty. 

All Prices are Subjecto Change Without Notice. 

Special thank to the following individuals and businesses for many of the photographs in this catalog showing Foredom tools in use-Mark Mann, Frank Russell, Frank Stetson, 

Quality Gem and jewelry Designs of CT. 

Form 301 bh8/07 Printed in U.S.A. 32 

a

Foredom Catalog - Hewitt-impex.co.uk

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?