Controls for roller shutters, awnings and blinds - Alu-Redőny Kft.

www.selve.de
SELVE-SEL-Plus-R-drives
(SELVE-Electronic-Luxus-Radio-drives)
SE-R – the innovative drives
with electronic shut-off
General information
SEL-R
The roller shutter installation is protected in an optimal way using a SEL-Plus-drive. During
first installation you can set, if the roller shutter will run smooth aganist the upper limit or will
be shut-off at the fixed upper point. The end limits are programmed by pushing a button –
first installation even without any installation cable.
Advantages of the SEL-Plus-R-drives
obstacle detection in downwards direction and reverse function
easy setting of the roller shutter drive using the five-wire connection
cable or via radio control without having to open the shutter box
secure 868 MHz radio transmission
easy set up of group and central control systems –
can be modified afterwards
patented group separation
installation in an usual manner
overload cut-out if torque is exceeded when
raising the shutter (e.g. frozen on roller shutter)
several SELVE electronic drives can be
connected in parallel without additional switching units
mains-connected control in addition
to the radio control
(e.g. additional switch, bus connection)
sophisticated adapter system enables
the motor to be adapted to all
conventional shafts
up- and downwards direction is detected
automatically
Selectable functions during setting of
the end limits:
no upper limit:
position shut-off
with upper limit:
soft approach to the shutter box with automatic release function
it is not necessary to adjust the roller shutter after stretching
(automatic adjustment)
end limits are programmed automatically by a push botton
Drives and accessories
for roller shutters and awnings
Controls for roller shutters,
awnings and blinds
Examples of application
Components
for roller shutters
41