COUPLERS AND CONNECTORS - Ingersoll Rand
COUPLERS AND CONNECTORS - Ingersoll Rand
COUPLERS AND CONNECTORS - Ingersoll Rand
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12 | INGERSOLL-R<strong>AND</strong> • <strong>COUPLERS</strong> <strong>AND</strong> <strong>CONNECTORS</strong><br />
SAFETY AIR FUSE VALVES<br />
• Valve designed to meet OSHA requirements<br />
• Provides automatic pressure reduction if a hose is cut, ruptures, or accidentally uncouples, thus preventing the hose from whipping<br />
• Constant bleed hole in the valve allows the flow check to automatically open, or reset, after repair to the hose is made<br />
• Brass body and adapter; stainless steel spring; celcon valve<br />
• All parts are corrosion-resistant<br />
• Max temperature: 180° F<br />
• Max allowable working pressure: 250 psig (17 bar)<br />
Safety Air Fuse Valves<br />
170-6<br />
Female / Male NPT Part Number Length<br />
Max Diameter<br />
in (mm)<br />
Cut-off Flow Rate<br />
@ 90 psig<br />
Safety Air Fuse Valves<br />
3/4 170-6 3" 1-1/4" (31.8) 112 – 128<br />
1 170-8 3-1/8" 1-1/2" (38.1) 220 – 260<br />
Warning: <strong>Ingersoll</strong>-<strong>Rand</strong> air fuse valves will function only on air lines having capacities equal to or exceeding the air fuse’s respective closing<br />
capacity. Nominal sizes of air fuses, therefore, must be equal to, or less than, that of their supply lines and must be consistent with the<br />
connecting hose. For example, a 1/2" air fuse should be used with a 1/2" hose.<br />
www.irtools.com • 1-800-376-TOOL