Section 4A: Tandem-Tandembox - Richelieu

| Slides | Tandem
TIP-ON for Tandem 550H/560H
Section 4A
All dimensions in millimeters (inch equivalents as shown) Version : 2008
STEP - 1
STEP - 2
Drawers that open with just a simple touch...
With TIP-ON for TANDEM plus, the new opening feature for
drawers without pulls, you are assured of proven Blum quality,
comfort and running action in any drawer. Just a simple touch
of the drawer front opens the drawer effortlessly.
Basic drawer components
Features
• Works for both frame and panel cabinet applications
• Designed for drawers without pulls
• Works with TANDEM plus runners without BLUMOTION
• Simple tool-free attachment to the runner
• Easy depth adjustment with drawer installed
• Performs best with loads up to 45 lbs
• Works with TANDEM plus 550H/560H series runners without BLUMOTION
Benefits
• Quick and easy installation, increases your design options
• Variety of adjustments allow a perfect installation every time
• Can be retrofi tted to existing TANDEM plus runners
• Requires only a minimal force to open and close
TIP-ON (left/right)
T557150
Package contains:
(1) - 2 x Tip-On mechanisms
(2) - 2 x adjustable triggers
(3) - 2 x rear hook spacers 1
3
*One set required per drawer
2
Minimum front gap
TANDEM 550H-560H
Assembly and adjustment
Attachment of mechanism
Attachment of trigger
Attachment of rear hook spacer
Adjustment
Drawer back preparation
Trigger allows in (-3) and
out (+2) adjustment of the
drawer front.
Page 4A6
www.richelieu.com
Te l : 1 . 8 0 0 . 3 6 1 . 6 0 0 0 • F a x : 1 . 8 0 0 . 3 6 3 . 0 1 9 3