Section 4A: Tandem-Tandembox - Richelieu

| Slides | Tandem
Orga-Line for Wood Drawers
Section 4A
All dimensions in millimeters (inch equivalents as shown) Version : 2008
Tool-free installation
ORGA-LINE divider sets for TANDEM
drawers are easily installed without
tools. The spring-loaded components
fi t into the drawers snugly and the
connector pieces are assembled with
dovetail slots.
Triple tray
10-3/8"
Double tray
6-15/16"
3-7/16"
Tray sizes
ORGA-LINE kits have trays in three
lengths. Most cutlery kits come with
fi ve triple length trays. Other kits may
have double or single length trays
included.
Single tray
3-7/16"
ORGA-LINE kit assembly
End connector
Tray partition
Compensation tray
End connector
Cutlery tray
Side rail
Side rail for
utensil dividers
Adjustable
divider
1. Place spring-loaded side rails in drawer and join
them with the end connectors.
2. Install the tray partition in the fi rst set of holes on
the side rail.
3. If applicable, install additional side rails and end
connectors for utensil dividers.
4. Place the spring-loaded compensation tray
between the tray partition and the end connector.
5. Insert the cutlery trays in any desired configuration.
6. Install the adjustable divider in the utensil section.
Tray configurations
Cutlery tray kits can be arranged in various confi gurations. The compensation tray can be positioned in front or back (example ZHI533KI4A).
Page 4A8
www.richelieu.com
Te l : 1 . 8 0 0 . 3 6 1 . 6 0 0 0 • F a x : 1 . 8 0 0 . 3 6 3 . 0 1 9 3