Extruder gears & gears for injection moulding machines

Gears for plastics technology
Extruder gears & gears for injection moulding machines
The following gear types with torques ranging from 500 – 200,000 Nm
are used for plastification on extruders and injection moulding machines.
The Knödler concept features variable connections
and thrust bearings, a finely graduated gear reduction range
and elegant solutions.
See for yourself!
FZ-KS 50 - FZ-KS 12000 extruder gear series
Torques ranging from 1,200 - 100,000 Nm;
Power takeoff side suitable for connection to hydro motors; large axle bases for
U-shaped designs;
Direct mounting of AC and DC motors; water-cooled motors available optionally.
Accessories:
Integrated radiator coil, oil/water cooler,
Temperature sensor, level monitor etc.
FZ 121.3 - FZ 9001.3 series gears for injection moulding machines
Torques ranging from 500 - 200,000 Nm;
Designed as shaft-mounted or helical bevel gears, single-, two- or three-stage;
Variable thrust bearing with adjustment of the worms and cylinders;
Worm pullout alternatively to the front or to the back; direct mounting of AC and
DC motors.
Accessories:
Integrated radiator coil, oil/air cooler, oil/water
cooler, temperature sensor, level monitor etc.

KNÖDLER-GETRIEBE GmbH & Co. KG · Schönbuchstr. 1 · D-73760 Ostfildern Ruit · PF 4105 · D-73744
Ostfildern Ruit
Fon ++49 (0)711-44814-0 · Fax ++49 (0)711-44814-40 · info@knoedler-getriebe.de · http://www.knoedlergetriebe.de