TrusTed Tools TrusTed Tools

Fluke 190 Series II ScopeMeter ® Test Tools
See more, fix more, in harsh industrial environments
Goes where ordinary scopes can’t go
Safety rated for industrial applications, the 190
Series ScopeMeter portable oscilloscopes combine
rugged portability with high performance to take
you all the way from troubleshooting microelectronics
to power electronic applications.
The first high-performance four-channel scopes
built for harsh industrial environments
For the first time, plant maintenance engineers and
technicians can take a high-performance fourchannel
scope into the harsh world of industrial
electronics. The new Fluke 190 Series II is the only
portable oscilloscope with two or four independent
isolated input channels, a CAT III 1000 V/CAT IV
600 V safety rating, and sealed case IP 51 dustproof
and drip-proof rated.
• 60 MHz, 100 MHz or 200 MHz bandwidth
• 2 or 4 independent isolated inputs, up to 1000 V
Fluke 190-204
• High-speed sampling: Up to 2.5 GS/sec
• Deep memory: 10,000 points per trace waveform
capture
• CAT III 1000 V/CAT IV 600 V safety rated for
high voltage environments
• 5,000 count multimeter 2 channel models or 999 count volt meter 4 channel models
• Li-Ion battery and easy-access battery door for extended usage
• Isolated USB host port for direct data storage to a USB memory
• USB-B-device port for PC connectivity
• Sealed compact case weighing only 2.2 kg (4.8 lb)
Sample screens
Connect-and-View captures even the most complex
motor drive signals.
Automatic capture and replay of
100 screens
ScopeMeter users know how frustrating
it is to see a one-time anomaly flash
by—never to be seen again. Not with the
ScopeMeter 190 Series II. Now you can look
back in time with a touch of the replay
button. In normal use, the instrument continuously
memorizes the last 100 screens,
on a first in-first out basis. At any moment
you can “freeze” the last 100 screens and
scroll through picture-by-picture or replay
as a “live” animation. Cursors can be used
for further analysis.
ScopeRecord mode for high-resolution
waveform recording up to 48 hours
ScopeRecord memory stores up to 27,000
data points per channel, capturing fast
intermittents and glitches as short as 8ns.
• Stores events like motion profiles, UPS,
power supply and motor start-ups
• In Stop On Trigger mode, ScopeMeter
automatically recognizes a power failure
and stores the waveform data
• With the waveform zoom (up to 100x)
you can look at the smallest details, like
individual power cycles
TrendPlot Paperless Recorder
The toughest faults to find are those that
happen once in a while. These intermittents
can be caused by bad connections,
dust, dirt, corrosion, or simple broken
wiring or connectors. Line outages, sags
or starting and stopping of a motor can
also cause a machine to stop. You may not
be around when it happens, but the Fluke
ScopeMeter will.
• Plot minimum and maximum plot values
and average over time up to 16 days
• Plot any combination of voltages, amps,
temperature, frequency and phase for
all four inputs, all with time and date
stamp to pinpoint faults
Use the 27,000 points memory of ScopeRecord and
zoom in for maximum detail.
Cursors and zoom features of the Fluke 190 Series II
help you to analyze the captured TrendPlot.
Ordering information
Included accessories Models
Battery charger/mains
FLUKE-190-204
adapter, Li-Ion battery pack,
FLUKE-190-204/S
voltage probe sets, test
leads, handstrap affixed FLUKE-190-104
to instrument, hangstrap FLUKE-190-104/S
(user selectable for left- or
righthand use), multi-language
FLUKE-190-202
users manuals on CD-ROM, FLUKE-190-202/S
FlukeView ® demo package
(with restricted functionality),
FLUKE-190-102
USB interface cable for PC
connectivity.
FLUKE-190-102/S
FLUKE-190-062
FLUKE-190-062/S
SCC290
Color ScopeMeter, 200 MHz, 4 channels
Color ScopeMeter, 200 MHz, 4 channels, with SCC-290 kit included
Color ScopeMeter, 100 MHz, 4 channels
Color ScopeMeter, 100 MHz, 4 channels, with SCC-290 kit included
Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input
Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input, with SCC-
290 kit included
Color ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input
Color ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input, with SCC-
290 kit included
Color ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input
Color ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input, with SCC-290
kit included
Kit containing FlukeView software for Windows, USB interface adapter/cable
and hard case
5,000 count dedicated digital multimeter on 2 channel
models.
Check price and availability at
www.fluke.com/wtb
For more information, go to www.fluke.com/scopemeter
ScopeMeter Test Tools
46