TrusTed Tools TrusTed Tools

Fluke 190-502 ScopeMeter ®
Handheld Oscilloscope
N10140
Accurately capture noise, distortion and other signal
characteristics with 500 MHz bandwidth and 5 GS/sec
sampling rate.
500 MHz, 5 GS/sec—the
legacy of leadership continues
After 20 years, Fluke ScopeMeter® industrial
scopes still lead, now with 500 MHz
bandwidth and 5 GS/s sampling speed.
The Fluke 190 Series II extends your
troubleshooting arsenal, showing you
waveform shape, timing, distortion and
disturbance in greater detail than ever
before. Two- and four-channel models fit
any application, measuring signals from
60 MHz to 500 MHz. ScopeMeter® test
tools are number one in ruggedness, the
only completely sealed, drip-proof, dustproof
IP51 rated handheld scopes.
• 500 MHz bandwidth
• Two independent isolated inputs, up
to 1000 V
• High-speed sampling: Up to 5.0 GS/sec
• Deep memory: 10,000 points per trace
waveform capture
• CAT III 1000 V/CAT IV 600 V safety
rated for high voltage environments
• 5000 count multimeter
• Li-ion battery and easy-access battery
door for extended usage
• Isolated USB host port for direct data
storage to a USB memory
• USB-B-device port for PC connectivity
• Sealed compact case weighing only
2.2 kg (4.8 lb)
New 500 MHz two-channel
ScopeMeter test tool advantages
in today’s applications?
A faster sample rate and higher bandwidth
means greater accuracy and
clarity. The scope will capture and
display unknown waveform shapes,
amplitudes and any disturbances. In
order to display at least the fifth harmonic
component of a signal, a good
rule of thumb is to select a scope with
a bandwidth of at least five times the
maximum clock rate of the device under
test. The faster the sample interval, the
more accurate and detailed the scope
will display a signal edge (dV/dt) and
peaks of any reflections or transients.
Recommended accessories
“S” version kit includes mainframe
and carry case and software
VPS510-x
Red, Green, Blue and Grey Voltage Probes
TRM50
50 Ohm Termination
1.7 ns rise time response accurately captures signals with
fast edges with signs of reflections.
Ordering information
Included accessories
Battery charger/mains adapter, li-ion battery pack,
voltage probe sets, 50 Ohm terminator, test leads, and
strap affixed to instrument, hangstrap (user selectable
for left- or righthand use), multilanguage users manuals
on CD-ROM, FlukeView® demo package (with restricted
functionality), USB interface cable for PC connectivity.
Models
FLUKE-190-502
FLUKE-190-502S
Color ScopeMeter, 500 MHz, 2 channels plus
DMM/Ext. input
Color ScopeMeter, 500 MHz, 2 channels plus
DMM/Ext. input, with SCC-290 kit included
Check price and availability at
www.fluke.com/wtb
47
ScopeMeter Test Tools
For more information, go to www.fluke.com/scopemeter