Timberlox Interior/Exterior Wiping Stain - Cloverdale Paint
Timberlox Interior/Exterior Wiping Stain - Cloverdale Paint
Timberlox Interior/Exterior Wiping Stain - Cloverdale Paint
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECHNICAL SPECIFICATIONS DATA SHEET<br />
16204<br />
<strong>Timberlox</strong> <strong>Interior</strong>/<strong>Exterior</strong> <strong>Wiping</strong> <strong>Stain</strong><br />
Product Description<br />
<strong>Timberlox</strong> <strong>Interior</strong>/<strong>Exterior</strong> <strong>Wiping</strong> <strong>Stain</strong> is a solvent base semi transparent wiping stain for use on interior or<br />
exterior unfinished wood work including furniture, doors, moldings and millwork. This product features<br />
excellent penetrating and grain definition properties and will not streak or leave lap lines. This is a pigmentbased<br />
stain which will last much longer than dye-based stains. May be applied by brush, spray, or wiping<br />
with a soft cloth. Best suited for use under solvent base and waterborne clear coats. Approved by the<br />
Master <strong>Paint</strong>er's Institute under category # 90.<br />
Intended Uses<br />
For the professional applicator as well as the do-it-yourselfer. This product is easy to apply by spray, brush,<br />
roll or wipe. Suitable for use under a wide variety of clear topcoats.<br />
Product Data<br />
Color:<br />
Drying Time: (@20 o C 50% Relative Humidity)<br />
Clear & Custom Tints<br />
Tack Free: 1 Hour<br />
Finish: Re-Coat: 4 - 8 Hours<br />
Penetrating<br />
Thinner:<br />
Bases:<br />
78001 Mineral Spirits<br />
Clear<br />
Flash Point (Tag Closed Cup):<br />
38 o C (100 o F)<br />
Vehicle Type:<br />
Alkyd<br />
Viscosity:<br />
N/A<br />
Solids by Volume:<br />
17% V.O.C. (Before Thinning):<br />
659 g/L or 5.48 lbs/gal<br />
Solids by Weight:<br />
20%<br />
Recommended Film Thickness<br />
(Per Coat):<br />
Wet: N/A<br />
Dry: N/A<br />
Theoretical Coverage (Per Coat):<br />
400 - 500 ft 2 /gal (9.8 - 12.3 m 2 /L)<br />
16204 Page 1 of 2<br />
70-0050
Surface Preparation<br />
All surfaces must be clean, dry and free of contaminants such as oils, grease, wax or sanding dust. For best<br />
results, moisture content should be below 18%. Wood should be sanded to a 120 - 220 grit smoothness<br />
before staining. This product requires constant agitation during application for consistant results. Failure to<br />
agitate may result in colorant settling out.<br />
Recommended Primer<br />
Drywall<br />
- N/A<br />
Method<br />
- Brush, spray, roll, wipe<br />
Wood<br />
- Self-Priming<br />
Thinning<br />
- Not Recommended<br />
Masonry<br />
- Not Recommended<br />
Cleanup<br />
- Use 78001 Mineral Spirits<br />
Steel<br />
- Not Recommended<br />
For detailed information please refer to MSDS<br />
Check for recent amendments to this data sheet at www.cloverdalepaint.com/html/catalog_recent_ar.asp<br />
Safety Precautions<br />
Warning<br />
CONTAINS PETROLEUM DISTILLATE. HARMFUL IF SWALLOWED. CAUSES EYE AND SKIN<br />
IRRITATION. VAPOUR HARMFUL. COMBUSTIBLE. KEEP OUT OF REACH OF CHILDREN. Keep away<br />
from heat, sparks, and open flame. Do not take internally. Avoid contact with eyes and skin, and breathing<br />
or vapour mist. Wear an air supplied mask when applying in enclosed areas. Wash thoroughly after<br />
handling. Close container after EACH use. USE WITH ADEQUATE VENTILATION.<br />
First Aid<br />
In case of eye contact, flush immediately with plenty of water for at least 15 minutes. Wash contaminated<br />
skin with soap and water. If ingested, call physician or the Poison Control Centre immediately.<br />
Warranty Disclaimer<br />
<strong>Cloverdale</strong> <strong>Paint</strong> manufactures quality products. In the event that this product is defective or in any way unsuitable for<br />
the application for which it is sold, <strong>Cloverdale</strong> <strong>Paint</strong> Inc. will replace the product free of charge. The warranty provided by<br />
this data sheet is the only warranty or guarantee of quality made in respect of this product by <strong>Cloverdale</strong> <strong>Paint</strong> Inc. By<br />
purchasing this product the customer accepts this warranty in lieu of all others, and waives all claims to any other<br />
remedy arising from any warranty or guarantee of quality, whether such warranty or guarantee of quality was made<br />
expressly to the customer or implied by any applicable law.<br />
6950 King George Hwy., Surrey, BC, V3W 4Z1<br />
Web Site: www.cloverdalepaint.com Email: helpdesk@cloverdalepaint.com<br />
Phone: (604) 596-6261 Fax: (604) 597-2677<br />
70-0050v2 2/7/05<br />
16204 Page 2 of 2<br />
70-0050