You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ROCK CLIMBING<br />
Rappelling on multi-pitch routes<br />
On a rappel descent, the rope techniques require<br />
vigilance and organization. All maneuvers at the<br />
belay must be done while tethered to the belay.<br />
Installing the rope in the anchor<br />
1. Make sure that the rappel station consists of two connected<br />
points. Tie an overhand bend. Tighten the knot connecting the<br />
two rope ends well.<br />
30 cm<br />
minimum<br />
Install the self-jamming device and the<br />
descender<br />
2. The self-jamming device holds the user if he needs to<br />
release his hands during the rappel (falling rocks, knots in<br />
rope...). Installing the self-jamming device below the descender<br />
creates slack which allows easy installation of the descender.<br />
Attach the self-jamming device to the belay loop of the harness<br />
with a girth hitch, so it can not be lost.<br />
Note: A knot at the end of the rope is a necessary precaution<br />
in a variety of situations (long rappel, poor visibility, fatigue...).<br />
+<br />
+<br />
Information is non-exhaustive. Refer to the other pages as well as to the user instructions and technical manuals. Technical training is essential.<br />
© Lafouche<br />
18<br />
Contents
Change language