Basic design rules for laser sintering - Handling

More documents

Recommendations

Info

Useful links for EOS machines, materials and material properties — Overview of machines http://www.eos.info/produkte/systeme-zubehoer.html — Overview of materials http://www.eos.info/produkte/werkstoffe.html — Material properties for Plastics http://eos.materialdatacenter.com/eo/ EOS 2012 · Basic Design rules for laser sintering Page 2
Building Chamber — Formiga P100 • 200 x 250 x 330 Standard • 190 x 240 x 330 for PrimePart DC — Eosint P390 • 340 x 340 x 620 Standard • 310 x 310 x 620 PrimePart DC • 290 x 290 x 290 PA 2202 black — Eosint P730 • 700 x 380 x 580 — Attention: Building Chamber = Part + Scaling !!!!! • The possible part size is depending on the scaling factor • scaling of 3.2 means a possible part size of 329 mm in x direction • It is not possible to build a 340 x 340 x 620 mm part for P390 ! Source: EOS GmbH EOS 2012 · Basic Design rules for laser sintering Page 3
Page 1: Basic design rules for laser sinter
Page 5 and 6: Steps — if a plane is in an angle
Page 7 and 8: Font — minimum font size 14 suita
Page 9 and 10: lose connection — use 0.1 mm dist
Page 11 and 12: gap — the min size of a gap is de
Page 13 and 14: costs — costs depending on z- hei
Page 15 and 16: Data format — the interchange for

Basic design rules for laser sintering - Handling

Create successful ePaper yourself

Delete template?

Save as template?