PX 527 Part A PX 226 Part B â PX 226L Part B
PX 527 Part A PX 226 Part B â PX 226L Part B
PX 527 Part A PX 226 Part B â PX 226L Part B
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PX</strong> <strong>527</strong> <strong>Part</strong> A<br />
<strong>PX</strong> <strong>226</strong> <strong>Part</strong> B – <strong>PX</strong> <strong>226</strong>L <strong>Part</strong> B<br />
Preliminary Technical Data Sheet<br />
CLEAR VACUUM CASTING POLYURETHANE<br />
FOR TECHNICAL PARTS AND PROTOTYPES<br />
FLEXURAL MODULUS 363,000 psi/(2,500 MPa) – Tg 194° F/(90° C)<br />
DESCRIPTION<br />
To be used by vacuum casting in silicon molds for making prototype parts and mock-ups with mechanical<br />
properties similar to thermoplastics like polystyrene and filled ABS.<br />
PROPERTIES<br />
• Fast demolding<br />
• Good impact and flexural resistance<br />
• Clear aspect<br />
• Can be easily colored with CP pigments<br />
PHYSICAL PROPERTIES<br />
<strong>PX</strong> <strong>527</strong><br />
PART A<br />
<strong>PX</strong> <strong>226</strong> – <strong>PX</strong> <strong>226</strong>L<br />
PART B<br />
Composition ISOCYANATE POLYOL MIXED<br />
Mix ratio by weight 100 55<br />
Aspect liquid liquid liquid<br />
Color transparent bluish transparent<br />
Viscosity at 77° F/(25° C) (mPa.s)<br />
Specific gravity at 77° F/(25° C) (g/cm 3 )<br />
Specific gravity of cured product at 73°<br />
F/(23° C)<br />
Pot life at 25°C on 100 g (min)<br />
Gel Timer TECAM<br />
BROOKFIELD<br />
LVT<br />
300 700 700<br />
ISO 1675 : 1985<br />
ISO 2781 : 1996<br />
<strong>PX</strong> <strong>226</strong> <strong>Part</strong> B<br />
<strong>PX</strong> <strong>226</strong>L <strong>Part</strong> B<br />
PROCESSING CASTING PROCESSING BY MACHINE<br />
• Heat both parts (isocyanate (1) and polyol) at 73° F/(23° C) in case of storage at lower temperature.<br />
• Weigh both 2 parts.<br />
• Mix for 1 minute minimum after degassing for 10 minutes under vacuum.<br />
• Cast under vacuum in silicone mold previously heated at 158° F/(70° C).<br />
• Demold after 45 minutes minimum at 158° F/70° C)<br />
(1) If <strong>PX</strong> <strong>527</strong> <strong>Part</strong> A Isocyanate is cloudy, please heat to 158°F/(70° C) until clear. Allow to cool to room<br />
temperature before proceeding.<br />
HANDLING PRECAUTIONS<br />
Normal health and safety precautions should be observed when handling these products :<br />
• Ensure good ventilation<br />
• Wear gloves, safety glasses and impervious clothes.<br />
For further information, please consult the product safety data sheet.<br />
1.19<br />
-<br />
1.10<br />
-<br />
-<br />
1.15<br />
4<br />
7.5<br />
Page 1/2- February 7, 2008<br />
AXSON France AXSON GmbH AXSON IBERICA AXSON BRASIL AXSON SHANGHAI AXSON JAPAN<br />
BP 40444 Dietzenbach Barcelona Sao Paulo Shanghai OKAZAKI CITY<br />
95005 Cergy Cedex Tél. (++49) 60 74 407110 Tel. (++34) 93 225 16 20 Tel. (++55) 11 5687 7331 Tel. (++86)-58 68 30 37 Tel.(++81) 564 26 2591<br />
FRANCE<br />
Tél. (++33) 1 34 40 34 60 AXSON Italie AXSON UK Limited AXSON MEXICO AXSON NA USA<br />
Fax (+33) 1 34 21 97 87 Saronno Newmarket Mexico DF Eaton Rapids<br />
Email : axson@axson.fr Tel. (++39) 02 96 70 23 36 Tel. (++44) 1638 660 062 Tel. (++52) 55 5264 49 22 Tel. (++1) 517 663 81 91
<strong>PX</strong> <strong>527</strong> <strong>Part</strong> A<br />
<strong>PX</strong> <strong>226</strong> <strong>Part</strong> B – <strong>PX</strong> <strong>226</strong>L <strong>Part</strong> B<br />
Preliminary Technical Data Sheet<br />
CLEAR VACUUM CASTING POLYURETHANE<br />
FOR TECHNICAL PARTS AND PROTOTYPES<br />
FLEXURAL MODULUS 363,000 psi/(2,500 MPa) – Tg 194° F/(90° C)<br />
MECHANICAL PROPERTIES at 23°C (1)<br />
Hardness ISO 868 : 2003 Shore D1 82<br />
Tensile strength ISO <strong>527</strong> : 1993 psi/(MPa) 10,600/(73)<br />
Elongation at break ISO <strong>527</strong> : 1993 % 8<br />
Flexural modulus ISO 178 : 2001 psi/(MPa) 363,000/(2,500)<br />
Flexural strength ISO 178 : 2001 psi/(MPa) 21,000/(117)<br />
Impact strength (CHARPY)<br />
Unnotched specimens<br />
ISO 179/1eU : 1994 ft-lb/in²/(kJ/m 2) > 48/(> 100)<br />
THERMAL AND SPECIFIC PROPERTIES (1)<br />
Glass transition temperature (Tg) ISO 11359 : 2002 ° F/(° C) 194/90<br />
Deflection temperature (HDT) ISO 75 : 2004 ° F/(° C) TBD<br />
Linear shrinkage (aluminum mold) - ppm TBD<br />
Maximal casting thickness - In/(mm) 0.2/5<br />
Demolding time at 158° F/(70° C) - min 45<br />
(1) Average values obtained on standard specimens / postcured 2 hours at 176° F/(80° C) after demolding<br />
STORAGE CONDITIONS<br />
Shelf life is 6 months for PART A (Isocyanate) and 12 months for PART B (Polyol) in a dry place and in original<br />
unopened containers at a temperature between 59 to 77° F/(15 to 25° C). Any open can must be tightly closed<br />
under dry nitrogen blanket.<br />
GUARANTEE<br />
The information contained in this technical data sheet result from research and tests conducted in our Laboratories under precise conditions. It<br />
is the responsibility of the user to determine the suitability of AXSON products, under their own conditions before commencing with the<br />
proposed application. AXSON guarantee the conformity of their products with their specifications but cannot guarantee the compatibility of a<br />
product with any particular application. AXSON disclaim all responsibility for damage from any incident which results from the use of these<br />
products. The responsibility of AXSON is strictly limited to reimbursement or replacement of products which do not comply with the published<br />
specifications<br />
Page 2/2- February 7, 2008