Convertible tops interiors carpet sets - Klaus Hermann Mayer-KFZ ...

Computer aided pattern construction
Computerized softtop production
Conclusion:
From mostly new factory original tops we design our patterns
for production. The definition of these means not only optimizing
shapes of the single pieces, but also thread direction of the
material, drawing of all seams and marks for tension-free sewing
together of all parts of the top.
This technology, which we started using already in 1986 is transferred to our cutting machines, and allows
tolerances of less than 1/10mm (1/250 in.) is not only used for our softtop-production, but also for cutting
of headliners, hoodbags and carpet sets in the same precision. Further we do several technical textile
cuttings for industry purposes, mostly for the south German car manufacturers. But all this technology will
make no sense, if the quality is not controlled. So we have also our own trimshop, where we do daily
installations of our products on our customers cars from the local area. This allows us, to get better
wherever it should be necessary.
4
As soon as a new model is transferred into our
computer, it will be firstly test-installed in our own
trimshop and, if necessary, further developed in
details. So second and even third trials could become
necessary, before we will add a new model into our
standard production program.
With our marking and cutting devices we are not only
able to work with 1/10 millimeters tolerances, but we
get also a high flexibility, so that any order can be
processed within very short times after receipt, which
will allow very short delivery times.
This combination of craftmanship hightech and experience will allow us a very good quality for reasonable
prices, which is confirmed by so many customers, trim shops, re-sellers and enthusiasts all over the world.