TS3P-6032 (3-piece) - Oasis Bath

VURSA kd SERIES
TUB/SHOWER
®
TS3P-6032R ABF / BP2-60 shown
MULTI-PIECE MODEL
TS3P-6032 (3-piece)
Rough-In Dimensions
60” wide x 33-1/4” deep x 77-1/2” high (w/ 16-inch apron)
Finished Dimensions
60” wide x 32” deep x 76-1/4” high (w/ 16-inch apron)
Unit Features
l Three - Piece Fiberglass Composite Construction
l Sanitary Grade Polyester Gelcoat Surface
l Front-Side Installation With Minimal Sealant Requirements
l 2” Dia. End Drain
l 2-1/2” Dia. Overflow
l Apron Drip Ledge Minimizes Water Migration
l Corner Accessory Ledge
l Generous, Multi-Level Back Wall Shelving
l Wall Design Accommodates Grab Bar Applications
l Textured Floor Pattern
l 1/2-inch Balsa Wood Core Floor Structure
Special Notes
l Optional ABF Unit (provides 3-inches of drain clearance)
l UL Listed Whirlpool System Available
l ‘QwikClic’ Technology (Patents Pending)
l 5-Year Module Warranty
l ANSI Standard Certification
l Bar Configurations Available Beyond Listed Packages
47

®
Order No.: TS3P-6032R (RH drain / 16” apron)
TS3P-6032L (LH drain / 16” apron)
Order No.: TS3P-6032R ABF (RH drain / 17-1/4” apron)
TS3P-6032L ABF (LH drain / 17-1/4” apron)
60” x 32”, 3-piece gelcoated fiberglass tub/shower with ‘QuikClic’, front side installation, multi-level back wall shelves, corner
accessory ledge, contoured neck rest, and drain on end indicated.
NOTE: Base unit provides 1-3/4” drain clearance, ABF unit provides 3” drain clearance.
TS3P-6032R
Shelf
Shelf
Base Unit ABF Unit
A 77-1/2” 78-3/4”
B 76-1/4” 77-1/2”
C 16” 17-1/4”
D 1-3/4” 3”
E 13-3/4” 15”
F 22-3/4” 24”
Shelf
2-1/2” Dia. Overflow
51”
2” Dia. Drain
9”
16-1/4”
33-1/4”
32”
15-3/4”
1-1/4”
1-5/8”
56-3/4”
60”
1-5/8”
Control Wall 1-1/4”
Back Wall
1-1/4”
Head End Wall
26-3/4”
Accessory
Ledge
Shelf
Shelf
Seam
Typical
Control
Area
A
26-3/4”
16”w x 3-1/4” d
Shelves
17”w x 3-1/2”d
Shelf
7”w x 3”d
Accessory
Ledge
60-1/4”
B
Seam
Shelf
Shelf
Shelf
Seam
17”w x 3”d Shelf
Seam
Shelf
E
F
C
Contouring
D3“ Drain Clearance
Enclosure Size:
56-3/4”w (max) x 60-1/4”h (max)
Package Order No.:
6P (whirlpool system)
Package includes: 6, adjustable jets, twin air injection controls, pneumatic on/off control, and 5.5 amp pump/motor.
NOTE: 6P system available with various reinforcement and component packages.
System
Options:
In-Line Heater (factory installed) (order code ILH)
Ozone Generator (factory installed) (order code OZG)
Air Control
A removable access panel is currently
not available for this model.
Std.
Pump
Position
Jets
Jets
Sump Dimensions: 51” long x 22” wide
Sump Depth: 13-1/4” (at tub center)
Sump Capacity: 42 gal. to overflow (unoccupied)
Jets
Air Control System Control
Suction
48

®
Package Order No.:
FH (Fair Housing wall reinforcement)
Dimension Tolerances
Package Includes: Factory applied, HUD-FHA compliant (Fair Housing), structurally reinforced wall areas (as shown) + 0 / -3/8-inch for the
independent field application of bars.
VURSA kd Series
NOTE: Factory installed stainless steel shower curtain rod available.
Model: TS3P-6032R ABF ABF / FH
(ABF Model)
(10/11/2010)
(12/28/2010)
®
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
6” w x 19-3/4” h
Reinforcement
6”
Shelf
6” w x 8-1/2” h
Reinforcement
31-1/4”
37-1/2”
Shelf
Shelf
37-1/2”
Shelf
Seam
2”
Seam
Shelf
Accessory
Ledge
Typical
Control
Area
24” w x 10” h
Reinforcement
10”
15”
Shelf
48”w x 15” h
Reinforcement
Accessory
Ledge
10”
24” w x 10” h
Reinforcement
Shelf
Shelf
Seam
38-3/4” (std)
40” (ABF)
Shelf
38-3/4” (std)
40” (ABF)
Seam
Shelf
Contouring
Package Order No.: 3SM (3-side, mid-level wall reinforcement)
Dimension Tolerances
Package Includes: Factory applied, 3-side, mid-level, structurally reinforced wall areas (as shown), exceeding ‘Fair + 0 / Housing’
-3/8-inch
(HUD/FHA) requirements.
VURSA kd Series
NOTE: Factory installed stainless steel shower curtain rod and bar packages available using 3SM reinforcement.
Model: Model: TS3P-6032R ABF ABF / 3SM
(ABF Model)
(10/11/2010)
(12/14/2010)
®
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
6” w x 19-3/4” h
Reinforcement
6”
26-3/4”
6”
6” w x 19-3/4” h
Reinforcement
Shelf
Shelf
Shelf
Shelf
Seam
2”
2”
Seam
Shelf
Accessory
Ledge
Typical
Control
Area
24” w x 25-1/2” h
Reinforcement
Alternate
Control Area
12-1/2”
12-3/4”
Reinforcement
Shelf
48”w x 12-3/4” h
Reinforcement
Reinforcement
Accessory
Ledge
24” w x 25-1/2” h
Reinforcement
Shelf
Shelf
Seam
Shelf
Seam
Shelf
Contouring
49

®
Package Order No.: 3SF (3-side, full-wall reinforcement)
Dimension Tolerances
+ 0 / -3/8-inch
Package Includes: Factory applied, 3-side, full-wrap, structurally reinforced wall areas (as shown), exceeding ‘Fair Housing’
(HUD/FHA) requirements, for the independent field application of bars.
VURSA kd Series
NOTE: Factory installed stainless steel shower curtain rod and bar packages available using 3SF reinforcement.
Model: Model: TS3P-6032R ABF ABF / 3SF
(ABF Model)
(10/11/2010)
(12/28/2010)
®
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
6”
6”
Shelf
24” w x 19-3/4” h
Reinforcement
26-3/4”
Shelf
48”w x 17” h
Reinforcement
Shelf
26-3/4”
24” w x 19-3/4” h
Reinforcement
Shelf
Seam
2”
2”
Seam
Shelf
Accessory
Ledge
Typical
Control
Area
24” w x 25-1/2” h
Reinforcement
Alternate
Control Area
12-1/2”
12-3/4”
Reinforcement
Shelf
48”w x 12-3/4” h
Reinforcement
Reinforcement
Accessory
Ledge
24” w x 25-1/2” h
Reinforcement
Shelf
Shelf
Seam
Shelf
Seam
Shelf
Contouring
Package Order No.:
Upgrade Package No.:
BP1-60 (1-1/2” dia., stainless steel, 2-bar only package)
BP1-60 WHT (1-1/4” dia., white powder coat, 2-bar only package)
BP1-60 OFW (1-1/4” dia., off-white powder coat, 2-bar only package)
BP1-60 SNK (1-1/4” dia., satin nickel, 2-bar only package)
VURSA kd Series
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 2-bar package with basic reinforcement Model: for components TS3P-6032R (as ABF shown). / BP1-60
NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
(ABF Model)
NOTE: Factory installed stainless steel shower curtain rod available.
(2/14/11)
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
Shelf
Shelf
Shelf
Shelf
Seam
Seam
Shelf
Accessory
Ledge
Typical
Control
Area
20” Bar
6”
Shelf
28” Bar
Accessory
Ledge
Shelf
17-1/2”
Shelf
Seam
33-1/2” (std model)
34-3/4” (ABF model)
Shelf
Seam
Shelf
16” (std model)
17-1/4” (ABF model)
Contouring
50

®
Package Order No.:
Upgrade Package No.:
BP2-60 (3-bar only package)
BP2-60 WHT (1-1/4” dia., white powder coat, 3-bar only package)
BP2-60 OFW (1-1/4” dia., off-white powder coat, 3-bar only package)
BP2-60 SNK (1-1/4” dia., satin nickel, 3-bar only package)
VURSA kd Series
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar package with basic reinforcement Model: for components TS3P-6032R (as ABF shown). / BP2-60
NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
(ABF Model)
NOTE: Factory installed stainless steel shower curtain rod available.
(2/14/11)
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
6”
24” Bar
Shelf
Shelf
Shelf
Shelf
Shelf
Accessory
Ledge
Seam
Typical
Control
Area
20” Bar
24” Bar
4”
Shelf
28” Bar
Accessory
Ledge
Seam
Shelf
17-1/2”
Shelf
Seam
33-1/2” (std model)
34-3/4” (ABF model)
Shelf
Seam
Shelf
16” (std model)
17-1/4” (ABF model)
Contouring
Package Order No.:
Upgrade Package No.:
4BAR (4-bar only package)
4BAR WHT (1-1/4” dia., white powder coat, 4-bar only package)
4BAR OFW (1-1/4” dia., off-white powder coat, 4-bar only package)
4BAR SNK (1-1/4” dia., satin nickel, 4-bar only package)
VURSA kd Series
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 4-bar package with basic reinforcement Model: for components TS3P-6032R (as ABF shown) / 4BAR
(replicates ADA94 bar configuration less seat and shower rod).
(ABF Model)
NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
(2/14/11)
NOTE: Factory installed stainless steel shower curtain rod available.
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
Shelf
Shelf
Shelf
Shelf
Seam
Seam
Shelf
Accessory
Ledge
Typical
Control
Area
20” Bar
6”
Shelf
28” Bar
Accessory
Ledge
6”
12 Bar”
Shelf
21-1/2”
24” Bar
Shelf
Seam
33-1/2” (std model)
34-3/4” (ABF model)
Shelf
9”
Seam
Shelf
16” (std model)
17-1/4” (ABF model)
Contouring
51

®
Package Order No.:
Upgrade Package No.:
5BAR (5-bar only package)
5BAR WHT (1-1/4” dia., white powder coat, 5-bar only package)
5BAR OFW (1-1/4” dia., off-white powder coat, 5-bar only package)
5BAR SNK (1-1/4” dia., satin nickel, 5-bar only package)
VURSA kd Series
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 5-bar package with basic reinforcement Model: for components TS3P-6032R (as ABF shown) / 5BAR
(replicates ADA03 bar configuration less seat and shower rod).
(ABF Model)
NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
(2/14/11)
NOTE: Factory installed stainless steel shower curtain rod available.
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
6”
24” Bar
Shelf
Shelf
Shelf
Shelf
Shelf
Accessory
Ledge
Seam
Typical
Control
Area
20” Bar
24” Bar
4”
Shelf
28” Bar
Accessory
Ledge
6”
Seam
12” Bar
Shelf
21-1/2”
24” Bar
Shelf
Seam
33-1/2” (std model)
34-3/4” (ABF model)
Shelf
9”
Seam
Shelf
16” (std model)
17-1/4” (ABF model)
Contouring
Package Order No.:
Fold-Up Seat
ADA94 (ADA compliant package)
Package Includes: Factory installed folding seat, 1-1/2” dia. stainless steel bars and shower curtain rod in compliance with
ANSI-A117.1-1994 (ADA) requirements.
VURSA kd Series
NOTE: ADA94 is a 4-bar package and may NOT meet site regulations . Check installation site
regulations for bar compliance requirements.
Model: TS3P-6032R ABF / ADA94
NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
(ABF Model Required
ADA
NOTE: Shower curtain rod may be deleted upon request without affecting compliance.
For ADA Compliance)
NOTE: Use of ABF unit is required for ADA compliance.
Compliant
(12/22/2010)
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
2”
2”
2” 2” 2”
Shower Curtain Rod
Shelf
Shelf
Shelf
Shelf
Seam
Seam
Shelf
Accessory
Ledge
Typical
Control
Area
24” Bar
2”
Shelf
28” Bar
Accessory
Ledge
2”
12 Bar”
Shelf
Control
Area
21-1/2”
24” Bar
Shelf
Seam
34-3/4” (ABF model)
4”
Shelf
9”
Seam
Shelf
Fold-Up Seat
17-1/4” (ABF model)
Contouring
52

®
Package Order No.:
ADA03 (ADA Compliant)
Fold-Up Seat
Package Includes: Factory installed folding seat, 1-1/2” dia. stainless steel bars and shower curtain rod in compliance with
ANSI-A117.1-2003 (ADA) requirements.
VURSA kd Series
NOTE: ADA03 is a 5-bar package and may exceed site regulations. Check installation site
regulations for bar compliance requirements.
Model: TS3P-6032R ABF / ADA03
NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
(ABF Model Required
NOTE: Shower curtain rod may be deleted upon request without affectiing compliance.
ADA
For ADA Compliance)
NOTE: Use of ABF unit is required for ADA compliance.
(12/27/2010)
Compliant
32” 1-1/4”
Control Wall
1-1/4”
60”
Back Wall
1-1/4”
Head End Wall
2”
2”
2” 2” 2”
Shower Curtain Rod
24” Bar
3-1/4”
Shelf
Shelf
Shelf
Shelf
Shelf
Accessory
Ledge
Seam
Typical
Control
Area
24” Bar
Control
Area
2”
24” Bar
4”
21-1/2”
Shelf
24” Bar
28” Bar
Accessory
Ledge
2”
Seam
12” Bar
Shelf
Shelf
Seam
34-3/4” (ABF model)
4”
Shelf
9”
Seam
Shelf
Fold-Up Seat
17-1/4” (ABF model)
Contouring
Photographic images may include optional components and appear different than actual product.
Dimensions shown are maximum. Due to the nature of the materials involved, actual unit dimensions can vary (tolerances: +0 / -3/8 inch).
Oasis reserves the right to modify or discontinue product and/or associated equipment without prior written or verbal notification or obligation.
SPTS-024.00 / 031811 53