command arms accessories catalog - Public Safety Equipment ...

More documents

Recommendations

Info

COMMAND ARMS ACCESSORIES MAGAZINE MANAGEMENT/MAGAZINE COUPLERS NEW Magazine Coupler MC16N CAA’s new and improved magazine coupler now comes with both small and large removable pouch pulls. The pouch pull automatically sets the height of the magazines, so they don’t interfere with the ejection port. The MC16N’s robust design with thicker walls provides more resistance to breakage. Based on the proven clamping design, the MC16N now has three adjustment screws for additional strength. The MC16N joins the CAA family of magazine couplers, along with the MCD16 for polymer AR15/M16 30 round magazines and the MC16 for aluminum 30 round magazine. • NEW AR15/M16 magazine coupler can be used with or without mag height regulator pouch pulls • Large and small removable pouch pulls, automatically stagger the magazines to the correct height, so they don’t interfere with the ejection port • Now with 3 screw tightening for extra rigidity • Robust design with thicker walls provides more resistance to breakage • Color: Black Green Khaki Part #: MC16N Fits: AR15/M16 30 Round Aluminum Magazine Length (in.): 3” Width (in.): 2.3” Made of: Polymer Weight (lb.): 0.09 Large pouch pull MC16N Shown with large pouch pull attached Small pouch pull Magazine Coupler MC16/MCD16/MC47 Magazine coupler doubles ammunition capacity and allows faster reloading saving precious seconds. • Wide gap between mags, makes reloads easy • Made of high density lightweight polymer • Will not scratch or deform magazines • Screw tightened. Clamps around magazine for secure, positive non slip hold • Color: Black Green Khaki Part #: MC16 AR15/M16 Aluminum Magazine Coupler/3” x 2.3”/0.09lb Part #: MCD16 AR15/M16 Magazine Polymer Coupler/ 3” x 2.3”/0.09lb Part #: MC47 AK47 Mag Coupler./3.065”x 2.39”/0.08lb MC16 MCD16 MC47 32 IN COMMAND OF INNOVATION • WWW.COMMANDARMS.COM • INFO@COMMANDARMS.COM • 1-866-611-9576 2012 CATALOG
COMMAND ARMS ACCESSORIES MAGAZINE MANAGEMENT/MAGAZINE ACCESSORIES. NEW Trigger Guard with Magazine Well Guide tgmg • Oversized trigger guard for gloved hands • No gunsmithing required • Magazine well guide facilitates quicker reloads • CNC from aviation grade aluminum for strength and lightweight • Color: Black Part #: TGMG Fits: AR15/M16 Made of: Aluminum Weight (lbs): .04 Length (in.): 2.75” Height (in.): 1” AK47 Magazine Release Extension AKMR Attaches securely to existing AK mag release with 2 set screws for 1 finger magazine removal. • Provides a larger surface area to release magazine • Wraps around trigger guard for easy access • One finger magazine release • Color: Black Part #: AKMR Fits: AK47/74 Made of: Polymer Weight (oz.): .64 Length (in.): 1.5” Height (in.): 1.375” Width (in.): 1.75” AR15/M16 Picatinny Magazine Holder MPS AR15/M16 magazine holder clamps onto any Picatinny rail allowing the operator to position a spare magazine for quick access, reducing reload time. • Ideal for use with our CBS collapsible stock or PRFCS Picatinny rail for existing collapsible stocks • No straps to contend with, MPS magazine holder retains mag firmly while allowing removal with the touch of a finger on the ergonomic lever • Fully ambidextrous design, accepts M16/AR15 style aluminum magazines • Can be belt mounted using RC1/RC2 belt clip • High density polymer construction • Color: Black Green Khaki AR15/M16 Magazine Loader ML556 Magazine loader for .223 cal/5.56mm ammunition. Designed to easily load magazines with speed and efficiency. • Lightweight and compact design • Thumb lever easily loads each round • Works with M16/AR15, Ruger Mini-14 and similar .223 magazines • Color: Black Part #: MPS Fits: AR15/M16 Made of: Polymer Weight (oz.): 2.1 Width (in.): 1.5” Length (in.): 4” Height (in.): 3” Magazine Dust Cover DC Rubber dust cover for AR15/M16, .223 magazine. Fits securely over top of magazine. • Keeps out dust and other foreign material • Works with M16/AR15, Ruger Mini 14, .223 and other magazines • Packaged individually, pairs or 4 pack • Color: Black DC1#: Single .223 Magazine Dust Cover DC2#: Two .223 Magazine Dust Covers DC4#: Set of Four .223 Magazine Dust Covers Part #: DC1 DC2 DC4 Fits: .223/5.56 Made of: Rubber Weight (oz.): .32 Length (in.): 2.625” Height (in.): .75” Width (in): 1.125” MP5 Magazine Coupler mc5 Expands ammunition capacity and saves precious reloading time by joining 2 magazines for the MP5 and 9mm UZI. • Each magazine can be staggered at a different height • Wide gap - makes it easy for reloading • Made of high density polymer and screw tightened • Will not scratch or deform magazines • Color: Black Part #: MC5 Fits: MP5/UZI 9mm Made of: Polymer Weight (oz.): 1.92 Width (in.): 1.875” Length (in.): 2.75” Height (in.): 2” ALL PRODUCTS ARE BUILT TO LAST OFFERING A LIFETIME WARRANTY AND 100% CUSTOMER SATISFACTION 33
Page 1 and 2: ALL PRODUCTS ARE BUILT TO LAST OFFE
Page 3 and 4: WWW.COMMANDARMS.COM Info@commandarm
Page 5 and 6: RONI RECON RONI R RONI advantages w
Page 7 and 8: Picatinny Quad Rail XM4S AR Carbine
Page 11 and 12: Step #1: Pull out both locking pins
Page 13 and 14: COMMAND ARMS ACCESSORIES RAIL SYSTE
Page 25 and 26: COMMAND ARMS ACCESSORIES BUTTSTOCKS
Page 29 and 30: COMMAND ARMS ACCESSORIES BUTTSTOCKS
Page 31: ALL PRODUCTS ARE BUILT TO LAST OFFE
Page 35 and 36: COMMAND ARMS ACCESSORIES RAIL MOUNT
Page 37 and 38: COMMAND ARMS ACCESSORIES REPLACEMEN
Page 39 and 40: COMMAND ARMS ACCESSORIES Remington
Page 41 and 42: COMMAND ARMS ACCESSORIES SHOTGUN AC
Page 43 and 44: COMMAND ARMS ACCESSORIES BOTTOM and
Page 45 and 46: COMMAND ARMS ACCESSORIES FLIP UP SI
Page 47 and 48: COMMAND ARMS ACCESSORIES LIGHT/LASE
Page 49 and 50: COMMAND ARMS ACCESSORIES SLING MOUN
Page 51 and 52: COMMAND ARMS ACCESSORIES CONCEALMEN
Page 53 and 54: COMMAND ARMS ACCESSORIES KNIVES Aff
Page 57 and 58: COMMAND ARMS ACCESSORIES PISTOL RAI
Page 59 and 60: WWW.COMMANDARMS.COM Info@commandarm

command arms accessories catalog - Public Safety Equipment ...

Create successful ePaper yourself

Delete template?

Save as template?