TEST REPORT
TEST REPORT
TEST REPORT
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Harvester head<br />
H 762 C<br />
Overall mass<br />
1327 / 1270 kg<br />
(with/without rotator and swing brake)*<br />
required pump capacity* 220 l/min<br />
Cutting length(available) 700 mm<br />
Chain speed 40 m/s<br />
Saw chain lubricating oil consumption* n.a. l/operating hour<br />
Saw chain lubricating oil tank volume 5 l<br />
Feed roller diameter 480 mm<br />
Guide length 1210 mm<br />
Delimbing diameter 450 mm<br />
max. felling diameter 590 mm<br />
Arm function<br />
2 encircling delimbing knives at top and bottom of the unit; supported by feed rollers<br />
in necessary<br />
* Manufacturers declaration<br />
1 1 fixed top v-shaped delimbing knife<br />
2 2 top, encircling, moving delimbing knives attached to basic<br />
frame, diameter-dependant contact pressure<br />
3 2 swivelling hydrostatically driven feed rollers (steel rollers with<br />
elliptical spikes)<br />
4 2 lower movable delimbing knives<br />
5 Felling unit with electro-hydraulically operated and driven<br />
chainsaw, diameter-dependant cut control<br />
Figure 6 harvester head<br />
6 Spring-loaded length measuring wheel<br />
7 Diameter measurement by single angle gauge connected to<br />
control bar of the swivelling feed rollers (s. 4)<br />
8 Hydraulic chain tensioner<br />
Min.<br />
Akt.<br />
Max.<br />
Maximum felling diameter (cm)<br />
45,0<br />
59,0<br />
65,0<br />
0 10 20 30 40 50 60 70<br />
Figure 7: Comparison between the current test machine and the minimum and<br />
maximum values from the 8 machines tested to date in the same engine power class.<br />
6/9