Solar System catalogue OKSOL-150 ENG - Orkli

8
REASONS TO CHOOSE AN
ALL-IN-ONE SOLAR SYSTEM
Outstandingly efficient,
super saver
It saves up to 65% of the energy used to
heat domestic water.
Aesthetically pleasing integration
Elegant design, in harmony with the
environment. All the components are
integrated into a single station.
Easily installed
Easily assembled, it only requires the water
inlet and outlet to be connected.
Roof-integrated
No visible tanks. The other components in
the system are below the collector.
Unbreakable
Impact-resistant, easily mounted materials,
safely preventing accidents (cuts).
Roof-integrated
In roof-mounted installations, the collector
integrates into the roof.
Autonomous
On roofs, in terraces or in gardens.
No work on the building required.
¿Cómo funciona?
COMPONENTS
1
2
3
Inlet.
Pump.
PV panel.
HOW DOES
IT WORK?
¿Cómo funciona?
1 2 3
4
Methacrylate cover.
7
5
2sqm stainless steel collector featuring
a blue selective surface.
9
10
6
5
4
6
7
8
Insulator.
Valve.
Outlet.
4
3
1
2
9
10
Exchanger.
150l tank made of corrosion-resistant
composite materials.
Solar radiation reaches the collector,
which concentrates the heat that is then
transferred to the heat transfer fluid that
circulates through the system.
> The selective treatment and the shape of the
surface, it uses a large proportion of incident
radiation. As it is filled with the heat transfer
fluid, it can use 100% of the surface.
The radiation on the surface is also
received on the PV panel, which generates
the power that drives the circulating pump.
The pump gets the hot fluid into the
exchanger.
The heat is transferred to the tank because
the hot fluid passes from the pump to the
exchanger.
> The tank will get hot whenever there is
sunlight up to the top limit set at 95 ºC.
5