Instructions for Cleaning, Sterilization, Inspection and ... - Stryker

More documents

Recommendations

Info

Appendix 3 Functional Check for Targeting Devices Description and Function: Target Devices to aim at the locking holes of implants (nails, plates) Potential Failure Modes: • Marks caused by hitting on the device • Cracks in the polymer • Damage of threads • Deformation of nail adapter • Displacement of connection pin Preventive Maintenance: Use an appropriate instrument spray for the mechanism of all moving parts and articulating surfaces. Handle with care. Do not hit on Target Devices. In case of failure, the instrument must be replaced and not be used. Marks on the metal part of the device Crack in the polymer Hit marks on functional surface Crack 24
Appendix 3 Deformation of nail adapter Damaged threads Connection pin displaced (should be flush with surface) 25
Page 1 and 2: Instructions for Cleaning, Steriliz
Page 3 and 4: 1. Introduction This document is in
Page 5 and 6: 3. Cleaning Two methods of cleaning
Page 7 and 8: 3. Cleaning Disinfection with the a
Page 9 and 10: 4. Sterilization Caution: Medical D
Page 11 and 12: 5. Storage before Use After sterili
Page 13 and 14: Appendix 2 Generic product groups d
Page 15 and 16: Appendix 2 Group VI - Storage trays
Page 17 and 18: Appendix 3 Drill Bit: Overview Dril
Page 19 and 20: Appendix 3 Functional Check for Scr
Page 21 and 22: Appendix 3 Connection rod of Gamma
Page 23: Appendix 3 Functional Check for Sci
Page 27 and 28: Appendix 3 Functional Check for For
Page 29 and 30: Notes 29
Page 31 and 32: Notes 31

Instructions for Cleaning, Sterilization, Inspection and ... - Stryker

Create successful ePaper yourself

Delete template?

Save as template?