Catalogue Par-ky 2013

Installation
49
Perfect for underfloor heating
All our floors allow heat to radiate faster than other parquet
floors. This means they are ideally suited for installation over
radiant heat floor systems. You can find our handy installation
tips at www.par-ky.com/en/downloads.
Installation kit
Installing Par-ky is really very easy. With our
installation kit you have all the tools you need
to install your Par-ky floor quickly and without
damaging it: spacers to create expansion joints,
pull bar and tapping block.
Quality underlay
All veneer parquet floors must be protected from dampness in the substrate. You do this
by installing a moisture-proof underlayment beneath the floor. This ensures continued
enjoyment of your Par-ky floor.
Standard underlay
This underlay (2 mm- 5 /64 inch)
consists of foam and plastic, with
the plastic being slightly wider
than the foam. This allows you to
stick the rows together easily. We
recommend the use of waterproof
tape for this.
• 50 m² (538.19 sq.ft) or
20 m² (215.27 sq.ft) rolls
• For use with
Aluminium underlay
This underlay reduces reflected
noise and levels minor dips in
the subfloor. Always lay with the
aluminium side up and seal the
edges together with waterproof
tape. This prevents substrate
dampness damaging the floor.
• 15.07 m² (162.21 sq.ft) rolls
• For use with
Damp-proof foil
Use a damp-proof foil for floors with
an integrated cork layer. To prevent
subfloor dampness damaging your
floor, seal the edges together with
waterproof tape.
• 150 micron
25 m² (269.09 sq.ft) per pack
• For use with