IntelliTouch Expansion Center Installation Guide - Pentair
IntelliTouch Expansion Center Installation Guide - Pentair
IntelliTouch Expansion Center Installation Guide - Pentair
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<br />
Installing Auxiliary Relays (Model i10x only)<br />
Install additional <strong>Expansion</strong> <strong>Center</strong> axillary relays as needed. There may be as many as five<br />
additional relays.<br />
To install a relay:<br />
1. At the <strong>Expansion</strong> <strong>Center</strong>, install the relays below the pre-installed relays. Secure in place<br />
with two retaining screws.<br />
2. Route the relay cable plug up through the holes into the high voltage compartment to the<br />
Personality board.<br />
3. Insert each auxiliary relay plug into the one of the two-pin sockets, beginning with AUX6,<br />
AUX7, AUX8, AUX9 and AUX10 on the Personality board. For wiring details, refer to the<br />
System Wiring Diagrams for model i10X page 10.<br />
Personality Board<br />
Relay Retaining<br />
Screws<br />
Optional Relays (5x)<br />
<strong>IntelliTouch</strong> <strong>Expansion</strong> <strong>Center</strong> Kit <strong>Installation</strong> <strong>Guide</strong>
Change language