Catalogue Hornady 2014
Catalogue Hornady - Munitions, Rechargement et Composants.
Catalogue Hornady - Munitions, Rechargement et Composants.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
.............................................................................................................................<br />
LOCK-N-LOAD® BULLET COMPARATOR<br />
Measuring cartridge lengths across the bullet tips is not a reliable (or repeatable) method for measuring<br />
loaded rounds. It’s common for variations of up to .025" to exist from one round to the next. Our Bullet<br />
Comparator solves that problem by measuring rounds from a reliable surface on the bullet – the ogive – to<br />
provide consistent, precise measurements. The Bullet Comparator is also used to check uniformity of<br />
bullets from base to ogive. Optional Anvil Base attaches to the caliper blade for this purpose.<br />
Anvil Base<br />
No. AB1<br />
Our Bullet Comparator easily attaches to the blade of your caliper with a thumbscrew and uses<br />
interchangeable bushings to measure from the bullet ogive. These bushings are available in fourteen sizes<br />
from 17 caliber to 45 caliber.<br />
Used in conjunction with the O.A.L. Gauge, the Bullet Comparator provides the ultimate in precision<br />
measurement. The Bullet Comparator will properly align the O.A.L. Gauge for precise measurement using<br />
a caliper. This method allows direct comparison of your loads as you set up your bullet seating die for any<br />
selected bullet free-travel (jump).<br />
LOCK-N-LOAD®<br />
HEADSPACE COMPARATOR<br />
The Lock-N-Load ® Headspace Comparator is the best<br />
method we’ve found to extend brass life, improve<br />
accuracy, and enhance safety. The gauge measures<br />
variations in your brass before and after firing or resizing.<br />
It allows for head space comparison between<br />
fire-formed brass and your re-sized brass. Any of five<br />
interchangeable bushings are attached to your caliper<br />
using the same body as found on our Bullet Comparator.<br />
The five bushings that come with the Lock-N-Load ®<br />
Headspace Comparator provide the ability to check<br />
most bottleneck cases, from 17 Rem through the<br />
belted magnums. Ackley Improved chambers use the<br />
same bushing size as the parent case. See chart provided<br />
or consult product instructions for cartridge/bushing<br />
size details.<br />
Body with 5 Bushing Set No. HK66<br />
5 Bushings Only No. HK55<br />
Determining the proper bushing<br />
diameter:If you add the neck diameter<br />
and the shoulder diameter and divide that<br />
number by two, you will use the bushing<br />
closest to that number.<br />
LOCK-N-LOAD®<br />
BULLET COMPARATOR<br />
Bullet Comparator – Basic Set<br />
No. B234<br />
Comparator body and 6 bullet inserts for bullet<br />
diameters: .224" (5.56mm), .243" (6mm), .257,"<br />
.277," .284" (7mm), .308" (7.62&8mm)<br />
Bullet Comparator – Complete Set<br />
No. B14<br />
Comparator body and all 14 bullet inserts for<br />
bullet diameters: .172," .204," .224" (5.56mm),<br />
.243" (6mm), .257," .264," .277," .284" (7mm),<br />
.3 0 8," .3 3 8," .3 5 8," .3 75," .416," .4 5 8"<br />
G<br />
.240"<br />
A<br />
.330"<br />
LOCK-N-LOAD® HEADSPACE BUSHINGS<br />
B<br />
.350"<br />
C<br />
.375"<br />
D<br />
.400"<br />
E<br />
.420"<br />
F<br />
.188"<br />
17 Hornet .17 Rem<br />
204 Ruger<br />
22PPC<br />
22/250 Rem<br />
6mm Rem<br />
257 Rob<br />
7.62x39 Brit<br />
6.5x55 Mauser<br />
223 WSSM<br />
243 Win<br />
6.5 x 284<br />
284 Win<br />
264 Win Mag<br />
7mm SAUM<br />
Bushing<br />
“blank” w/.188"<br />
diameter hole.<br />
221 FB 6PPC, 6BR Rem 25/06 Rem 7mm WSM 243 WSSM 7mm Rem Mag 7mm STW<br />
Drill and Ream<br />
for sizes not<br />
222 Rem 250 Sav 270 Win 30-40 Krag 260 Rem 7mm Ultra Mag 300 RSAUM listed.<br />
222 Rem Mag 7BR Rem 7 x 57mm 270 WSM 300 WSM 300 Win Mag<br />
223 Rem 280 Rem 7mm-08 Rem 300 Wby Mag 300 Ultra Mag<br />
220 Swift 30-30 Win 300 Sav 325 WSM 8mm Rem Mag<br />
30/06 308 Win 338 Win Mag 338 Ultra Mag<br />
300 H&H 35 Rem 350 Rem Mag 35 Whelan<br />
375 H&H Mag<br />
RIMFIRE THICKNESS GAUGE<br />
Sorting ammo by rim thickness will provide<br />
ammo with similar ignition qualities for improved<br />
accuracy. This proven technique is used by<br />
competitive shooters and varmint hunters.<br />
The rimfire gauge attaches to your caliper and<br />
includes bushings for use with all .17 and .22<br />
caliber rimfire ammo.<br />
No. RF17<br />
1-800-338-3220 RELOADING<br />
74