Haltec catalogue - RLM Distributing

DIAL GAUGES
GA-280 Dial-Type Pressure Gauge For Truck Service
Calibrated 0-160 psi in 1 lb. increments and 0-1100 in kPa metric scale.
Recalibratible. Dial-type gauge with 12" flexible hose and CH-335 dual
foot air chuck. Can be used with liquid fill tires (tractor service). Packed
1 to a box.
N-1055 Dial Gauge
Calibrated 0-160 psi in 5 lb. increments and 0-1100 in kPa metric
scale. Holds pressure read out until released. Has 12" hose and
CH-335 dual foot air chuck. For truck service.
GA-274 Standard and Large Bore Air Liquid Gauge
Calibrated 0-160 lbs. in 5 lb. units and 0-1100 in kPa metric scale.
14" flexible hose. Holds pressure readout until released.
GA-285 Dial Gauge With
Rigid Extension
Calibrated 0-160 lbs. in 5 lb.
units and 0-1100 in kPa
metric scale. Features a
10" extension.
GA-289 Dial Gauge
Calibrated 0-160 lbs. in 5 lb. units
and 0-1100 in kPa metric scale.
N-1510 Cap Gauge
Fits Large Bore and Super Large
Bore valves. Calibrated 0 to 160
psi in 5 lb. increments. Allows
visual inspection of tire pressure.
See page 16 for the new
PT gauge.
GA-276 Standard and Large Bore Dial Gauge With Extension Handle
Extension handle makes tire pressure measurement easier. Straight-on air
chuck fits Standard and Large Bore valves. Overall length is 18".
Calibrated to 0-160 psi in 5 psi increments and 0-1100 kPa. Holds pressure
readout until released. Comes with a bleeder valve. Similar to GA-274
34
GA-290 Standard and Large Bore Air/Liquid Master Gauge
Straight-on air chuck fits both Standard and Large Bore valves.
Has 12" flexible hose to get to those hard-to-reach valves.
Calibration 0-160 psi in 1 lb. increments and 0-1100 in kPa
metric scale. Has recalibration feature and replaceable filters.
Packed 1 to a box. Haltec Posi-Seal washer.