Haltec catalogue - RLM Distributing

STANDARD BORE TOOLS
TL-610 Standard Bore
4-Way Valve Tool
Repairs and reconditions
inside and outside valve threads.
Inserts and removes cores.
Corrosion-resistant, cadmium-plated.
TL-685 Core Installation Tool
Fits Large Bore
➞
Fits Standard Bore
➞
ASP-1 Tube Standard Bore
Deflating Aspirator
Creates vacuum by screwing aspirator
onto valve mouth and applying
air chuck to threaded inlet. Fits
Standard Bore valves.
TL-615 Standard Bore 2-in-1 Valve Tool
Combination valve core remover and
deflator. Corrosion-resistant, cadmiumplated.
TL-620 Standard Bore Core Tool
Plastic handle provides firm grip for inserting and
removing valve cores.
TL-625 Standard Bore Valve Core Tool
How many times have you
pushed the valve core tool
through your pocket? Here's
a tool with a recessed probe that fits easily
in any pocket.
TL-635 Standard Bore Valve Core Tool
Haltec equivalent to Schrader 2688 and Eaton
5406. Tool is made from hex steel, making it very
sturdy, yet economical.
TL-665 Valve Stem Installation Tool
Rugged tool handles any length valve in any size rim.
Screws over valve threads and quickly installs valve
into valve hole by applying pulling pressure.
TL-645 Valve Fishing Tool
Combines valve core wrench and deflating pin
with flexible cable for fishing valve thru rim hole.
Available in 24" – TL-645-24.
TL-650 Fishing Tool
Guides, aligns and holds valve through
valve hole while mounting tire.
TL-612 Standard Bore Core Tool
With an overall length of 8" and oversized handle, the
Haltec TL-612 provides a firm grip for inserting and
removing valve cores.
TL-633 Valve Cap Tool
The TL-633 makes it easy to remove and install valve caps
on inside dual wheels. Designed for aluminum wheels
with small hand holes, it comes with a protective sleeve
to prevent scratching. Also works great at removing
tight or cross-threaded caps. Positive hold while valve is
serviced. Keeps cap in tool.
TL-632 Truck Extension Service Tool
This tool tightens both metric (European) and domestic
type extensions. This tool is broached to engage the
metric hex at the extension top and will reach the hex
on a 7" U.S.A.-type extension.
TL-630 Hex Nut Driver For 500 Series Truck Valves
Installation tool for tubeless clamp-in metal valves.
Accommodates all lengths of tubeless truck valves
including the TV-574.
39