+48/58 677 81 00, Fax

HQ CPL veneer
White
Oak
Milano 1
Grey
Euroinvest
Oak
Milano 2
Beech
Porta
Oak
Milano 3
Mahogany Maple Walnut
Oak
Milano 4
Oak
Milano 5
DOOR LEAF CONSTRUCTION
The door leaf consists of a fi nger jointed softwood frame fi lled with a perforated
chipboard, reinforced with an internal plywood frame. The frame and the core
are covered, on both sides, with an HDF board.
LEAF EDGE PROFILE
“K” profi e leaf edge.
Both side edges and the upper edge of the leaf covered with leaf-colored skirting
tape.
FINISHING
The leaf is covered with 0.2 mm HQ CPL veneer (Continuous Pressure Laminate
High Quality).
MODELS
8 patterns: from „A” to „H”.
Door leaf is available in version for single sliding door without hinges and rebate
and with a groove for guiding element slot-milled in the bottom edge of the door
leaf (included in the system) 1 .
ACCESSORIES – included in the leaf price
• two standard pintle hinges
• three hinges for a leaf of dimension „100”
• lock: for regular key, bathroom lock or for cylinder insert
• preparation for shortening up to 60 mm
• round fl ush handle (for sliding doors)
LEAF SIZES (page 138, table 1)
Single leaf: „60“, „70“, „80“, „90“, „100“
Double leaf: „120“ ÷ „200“ 2
RECOMMENDED DOOR FRAMES (from page 116)
• Door frame, fi xed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Metal door frame
NOTES:
• Depending on the veneer color, we offer two grove colors: light brown or dark brown.
Door leaves – cross sections
1
A, F and H designs in the sliding door version – for an additional charge – require to be
ordered through the Contract Department.
2
Arbitrary selection of door leaf sizes for double doors.
perforated chipboard
Additional charges (option)
„100” size
ventilation undercut
third hinge for the leaf dimensions „60”, „70”, „80” or „90”
hook lock with side handles (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon
pattern H
37