B-SERIES SWITCHES

More documents

Recommendations

Info

TEMPERATURE <strong>SWITCHES</strong> B-Series temperature switches feature a SAMA Class II vapor pressure thermal system. This system provides quick, accurate response to process temperature changes with negligible ambient temperature effects. This is inherent in the design due to the precise relationship that exists between temperature and pressure according to the vapor pressure laws. A wide selection of sensing bulb and armored capillary lengths is available. The vapor pressure system design features small bulb sizes, making installation easy and cost-effective. All models feature ±1.0% percent of span setpoint repeatability with very high overtemperature ratings. These standard designs perform well in applications where shock and vibration could be a problem and should be used with Ashcroft thermowells for bulb protection and ease of installation and maintenance. STANDARD TEMPERATURE RANGE SELECTION Nominal Range (1) Maximum Temperature Approximate Deadband (1) Switch Element °F °C °F 20, 26, 27 21, 24, 31 50 22 32 –40 to 60 –40 to 160 400 1.0-2.0 3.0-8.0 1.5-5.5 1.4-6.0 8.0-16.0 0 to 100 –20 to 400 400 1.5-3.0 5.0-12.0 2.2-8.5 1.5-7.5 9.0-20.0 75 to 205 20 to 95 400 1.5-3.5 8.0-16.0 2.5-12.0 2.0-9.0 10.0-24.0 150 to 260 65 to 125 400 1.5-3.0 5.0-12.0 2.2-8.5 2.0-9.0 10.0-24.0 235 to 375 110 to 190 500 1.5-3.5 5.0-12.0 2.5-8.5 2.0-9.0 10.0-24.0 350 to 525 (3) 175 to 275 700 2.0-4.5 8.0-16.0 3.2-12.0 2.5-10.0 15.0-34.0 500 to 750 (2) 260 to 400 900 4.0-8.0 16.0-30.0 7.2-24.0 5.0-23.0 30.0-50.0 NOTES: 1 All deadbands given in °F. 2 Available with remote mount thermal systems only. 3 Not available with 2 3 ⁄4˝ stem. 4 Dual switch element multiply single switch element value by 1.6 for approximate deadband. 5 Set and reset points must fall within the adjustable range. THERMOWELLS Thermowells must be used on any application where the bulb of the temperature switch may be exposed to pressure, corrosive fluids or high velocity. Additionally, the use of a thermowell permits instrument interchange or calibration check without disturbing or closing down the process. Ashcroft temperature switches have bulb diameters to match 3 ⁄8˝ nominal bore thermowells Is. The bulbs have a sensitive portion length of 2˝ which can be used with 2 1 ⁄2˝ “U” dimensioned thermowells or longer. For maximum accuracy a thermowells “U” dimension should be selected to permit complete immersion of the sensitive portion plus 1˝ when measuring the temperature of liquids; an extra 3˝ should be allowed when measuring the temperature of gases. Thermowell bushings should be used with remote mount temperature switches. We recommend the standard 3˝ bulb and code 69 Series bushings for use with any thermowell “U” dimension. A split rubber grommet allows easy installation and “S” dimension adjustment. To order a thermowell, refer to Price Sheet TH/PS-1 for complete information. 69 series (XBX) bushing Bushing slides along capillary “S” INSTRUMENT (SWITCH) CONNECTION Process connection 1/2" NPT “S” U˝ 3˝ 6
ORDER INFORMATION B-<strong>SERIES</strong> TEMPERATURE SWITCH MODEL NUMBER: To specify the exact switch desired, select entries from appropriate tables as shown in example below. 1 2 3 4 T 4 2 0 T 0 5 030 5 X N H 6 150° to 260°F T4 T7 1 – ENCLOSURE Temperature switch, type 400, watertight enclosure meets NEMA 3, 4, 4X, 13 and IP66 requirements. Temperature switch, type 700, explosion-proof enclosure meets Div. 1 & 2, NEMA 7, 9 and IP66 requirements. 2 – SWITCH ELEMENT SELECTION Order Switch Elements Code UL/CSA Listed SPDT 20 (7) Narrow deadband ac 15A, 125/250 Vac 21 Ammonia service 5A, 125/250 Vac 22 (6) Hermetically sealed switch, 5A, 125/250 Vac narrow deadband 23 Heavy duty ac 22A, 125/250 Vac 24 (1) General purpose 15A, 125/250/480 Vac 1 ⁄2A, 125 Vdc 1 ⁄4A, 250 Vdc; 6A, 30 Vdc 25 (2) Heavy duty dc 10A, 125 Vac or dc, 1 ⁄8 HP, 125 Vac or dc 26 (7) Sealed environment proof 15A, 125/250 Vac 27 High temperature 300°F 15A, 125/250 Vac 28 (5) Manual reset trip on 15A, 125/250 Vac increasing 29 (5) Manual reset trip on 15A, 125/250 Vac decreasing 31 Low level (gold) contacts 1A, 125 Vac 32 Hermetically sealed switch, 11A, 125/250 Vac general purpose 5A, 30 Vdc 50 Variable deadband 15A, 125/250 Vac UL/CSA Listed Dual (2 SPDT) 61 (7) Dual narrow deadband 15A, 125/250 Vac 62 (7) Dual sealed environment 15A, 125/250 Vac proof 63 Dual high temp. 300°F 15A, 125/250 Vac 64 Dual general purpose 15A, 125/250/480 Vac 1 ⁄2A, 125 Vdc 1 ⁄4A, 250 Vdc 65 Dual ammonia service 5A, 125/250 Vac 67 (4,6) Dual hermetically sealed 5A, 125/250 Vac switch, narrow deadband 68 (4) Dual hermetically sealed 11A, 125/250 Vac switch, general purpose 5A, 30 Vdc 71 Dual hermetically sealed 1A, 125 Vac switch, gold contacts 3 – THERMAL SYSTEM SELECTION Direct Mount Order Code System Material Style TS 3l6 SS Rigid Remote Mount Order Code System Material Line Length Style (9) T05 316 SS 5´ Capillary T10 316 SS 10´ with T15 316 SS 15´ 302 SS T20 316 SS 20´ Spring T25 316 SS 25´ Armor 4 – BULB LENGTH SELECTION Direct Mount Minimum Order “S” Thermowell Code Dimension “U” Dimension 027 (8) 2 3 ⁄4˝ – 040 4˝ 2 1 ⁄2˝ 060 6˝ 4 1 ⁄2˝ 090 9˝ 7 1 ⁄2˝ 120 12˝ 10 1 ⁄2˝ Remote Mount 030 (9) 3˝ 2 1 ⁄2˝ 6 – STANDARD TEMPERATURE RANGE SELECTION Adjustable Range °F °C –40 to 600 –40 to 160 0 to 100 –40 to 400 75 to 205 20 to 95 150 to 260 65 to 125 235 to 375 110 to 190 350 to 525 175 to 275 500 to 750 260 to 400 NOTES: 1 Standard switch. 2 Available with remote mount thermal systems only. 3 Dual switches are 2 SPDT snap-action switches, not independently adjustable. 4 Not available with type 400 enclosure. 5 Not available with type 700 enclosure. 5 – OPTIONS Use table on page 9 6 Estimated dc rating, 2.5A, 28 Vdc (not UL listed). 7 Estimated dc rating, 0.4A, 120 Vdc (not UL listed). 8 Not available on 350 to 525°F. 9 Consult factory on remote mount for bulb lengths other than 3.˝ 7
Page 1 and 2: YOUR PRESSURE AND TEMPERATURE SWITC
Page 3 and 4: Applications include: pumps, compre
Page 5: ORDER INFORMATION B-SERIES PRESSURE
Page 9 and 10: OPTIONAL FEATURES AND ACCESSORIES B
Page 11 and 12: PRODUCT SELECTION INFORMATION (sing
Page 13 and 14: ADDITIONAL PRESSURE AND TEMPERATURE
Page 15 and 16: FERMER MET TRE EN SERVICE. FERMER F

B-SERIES SWITCHES

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?