Phoenix Contact COMBICON control - PCB Terminal ... - Power/mation

Connection cross-section of up to
COMBICON control
PCB terminal blocks with screw connection for wave soldering processes, currents of up to 32 A
0.5 mm 2 Technical data
Note:
The 2 and 3-position variants have a locating pin (1.5 mm long) to
support the mechanical load.
Drilling diagram and dimensional drawing MPT 0,5/...2,54, for no. of
pos. 2 to 3, see page 515.
MPT 0,5/...-2,54
MICRO PCB terminal block with screw connection with an IC pitch
Accessories
For all types Type Page
Marker cards
486
SK 2,54/2,8
u C
Dimensional drawing
6,2
a+3
– MICRO PCB terminal block with an
IC pitch of 2.54 mm
– Single-row type with horizontal
connection direction
– Application in miniature assemblies with
high contact density
Screwdriver
SZS 0,4 X 2,0
Order No.
1205202
3,5 8,5
3,1
1,5
2,54
a
Drilling diagram
4 to 12-pos. variants
1,5
a
2,54
3,1
1,1
Technical data in accordance with IEC / DIN VDE
Rated current / conductor cross-section [A] / [mm²] 6 / 0.5
Rated insulation voltage with pollution degree 2 [V] 160
Pitch [mm] 2.54
Connection capacity
Solid / stranded [mm²] / [mm²] / AWG 0.14 - 0.5 / 0.14 - 0.5 / 26 - 20
Stranded with ferrules without plastic sleeve [mm 2 ] 0.25 - 0.34
Stranded with ferrules with plastic sleeve [mm 2 ] 0.25 - 0.34
Multi-conductor connection capacity (2 cond. with the same cross section)
Solid / stranded [mm 2 ] 0.14 - 0.34 / 0.14 - 0.34
Stranded with ferrules without plastic sleeve [mm 2 ] -
Stranded with TWIN ferrules with plastic sleeve [mm 2 ] -
Insulation coordination
Surge voltage category / pollution degree III / 3 III / 2 II / 2
Rated insulation voltage [V] 63 160 320
Rated surge voltage [kV] 1.5 1.5 2.5
Approval data (UL/CUL) Use Group B C D
Nominal voltage [V] 125 - -
Nominal current [A] 6 - -
Connection capacity AWG AWG 30 - 20 - -
Approval data (CSA) Use Group B C D
Nominal voltage [V] 125 - -
Nominal current [A] 6 - -
Connection capacity AWG AWG 28 - 20 - -
General data
Stripping length [mm] 4.5
Screw thread M1,6
Tightening torque [Nm] 0.12 - 0.15
Type of insulation material / group of insulation material
PA / I
Inflammability class acc. to UL 94
V0
Bore hole diameter/ pin dimensions [mm] 1.1 / 0.5 x 0.9 mm
Ordering data
Type Order No. Pcs. / Pkt.
No. of pos. Dim. a 2.54 mm pitch, color: green
[mm]
2 2.54 MPT 0,5/ 2-2,54 1725656 50
3 5.08 MPT 0,5/ 3-2,54 1725669 50
4 7.62 MPT 0,5/ 4-2,54 1725672 50
5 10.16 MPT 0,5/ 5-2,54 1725685 50
6 12.70 MPT 0,5/ 6-2,54 1725698 50
7 15.24 MPT 0,5/ 7-2,54 1725708 50
8 17.78 MPT 0,5/ 8-2,54 1725711 50
9 20.32 MPT 0,5/ 9-2,54 1725724 50
10 22.86 MPT 0,5/10-2,54 1725737 50
11 25.40 MPT 0,5/11-2,54 1725740 50
12 27.94 MPT 0,5/12-2,54 1725753 50
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com
PHOENIX CONTACT
51