Buffer QC - Qiagen
Buffer QC - Qiagen
Buffer QC - Qiagen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DR<br />
Material Safety Data Sheet<br />
acc. to ISO/DIS 11014<br />
Page 2/5<br />
Printing date 02/26/2013 Reviewed on 02/26/2013<br />
Trade name: <strong>Buffer</strong> <strong>QC</strong><br />
· Protective equipment: Do not inhale explosion gases or combustion gases.<br />
(Contd. of page 1)<br />
6 Accidental release measures<br />
· Person-related safety precautions: Ensure adequate ventilation<br />
· Measures for environmental protection: Do not allow to enter sewers/ surface or ground water.<br />
· Measures for cleaning/collecting:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
7 Handling and storage<br />
· Handling:<br />
· Information for safe handling: Ensure good ventilation/exhaustion at the workplace.<br />
· Information about protection against explosions and fires:<br />
Keep ignition sources away - Do not smoke.<br />
· Storage:<br />
· Requirements to be met by storerooms and receptacles: No special requirements.<br />
· Information about storage in one common storage facility: Not required.<br />
· Further information about storage conditions: Keep receptacle tightly sealed.<br />
8 Exposure controls and personal protection<br />
· Additional information about design of technical systems: No further data; see item 7.<br />
· Components with limit values that require monitoring at the workplace:<br />
· CAS No. Designation of material % Type Value Unit<br />
67-63-0 propan-2-ol<br />
PEL 980 mg/m³, 400 ppm<br />
REL Short-term value: 1225 mg/m³, 500 ppm<br />
Long-term value: 980 mg/m³, 400 ppm<br />
TLV Short-term value: 984 mg/m³, 400 ppm<br />
Long-term value: 492 mg/m³, 200 ppm<br />
· Personal protective equipment:<br />
· General protective and hygienic measures: Wash hands before breaks and at the end of work.<br />
· Protection of hands: Protective gloves<br />
· Material of gloves<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks<br />
of quality and varies from manufacturer to manufacturer.<br />
· Penetration time of glove material<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and<br />
has to be observed.<br />
· Eye protection: Tightly sealed goggles<br />
9 Physical and chemical properties<br />
· General Information<br />
Form:<br />
Color:<br />
Odor:<br />
Fluid<br />
Colorless<br />
Characteristic<br />
· Change in condition<br />
Melting point/Melting range: Undetermined.<br />
Boiling point/Boiling range: Undetermined.<br />
(Contd. on page 3)
Change language