rotors - Pipelife

LOW VOLUME IRRIGATION
XERI-POP TM
micro spray
the Xeri-pop micro-spray makes it easy to
integrate a durable micro-spray into a lowvolume
irrigation design. the Xeri-pop is also
ideal for applications that require flexibility
and ease of installation
Xeri-pops can be installed and located in
nearly any location and are ideal for small,
odd-shaped planting beds.
perfect solution to vandal-prone areas
FEATURES
• Ease of service
- the Xeri-pop’s ¼” distribution tubing can
readily connect to ½” or ¾” polyethylene
tubing or to a multi-outlet manifold (emt-
6XeRi). connections to polyethylene tubing
are accomplished with an spB-025 ¼” selfpiercing
barb connector.
- the flexibility of ¼” tubing allows the Xeripop
to be easily located and relocated as
planting conditions dictate
- the Xeri-pop can operate with 1,4 to 3,4 bar
base pressure when water is supplied via ¼”
distribution tubing (dt 025).
- a durable, plastic snap-collar secures the ¼”
tubing to the outside of the Xeri-pop case.
• Design Solutions
- Xeri-pops work with Rain Bird’s 5’ and 8’ mpR
nozzles and Xeri pc nozzles (0,8 m and 1,2
m).
- available in 4” (10 cm) and 6” (30 cm) pop-up
heights
• Durability
- external parts are Uv-resistant
OPERATING RANGE
• Pressure: 1,4 to 3,4 bars
• Filtration: Depends on Nozzle used with
Xeri-pop
MODELS
Xp-400X: 4-inch pop-up
Xp-600X: 6-inch pop-up
NOZZLE OPTIONS
• Xeri PC nozzles
• 5 Series MPR nozzle (all configurations)
• 8 Series MPR nozzle (8H and 8Q)
¼˝distribution
tube snap collar
¼˝distribution
tube inlet
plant material
insert fitting:
¼self-piercing barb
connector spB-025
finish gradre
16 mm polyethylene tubing
snap collar
Xeri-pop Xp-400X
micro-tubing dt-025
¼’’ barbed inlet
protective flange
12˝Xeri-Pop in planting bed
www.rainbird.eu