Timing Belts and Pulleys - REIFF Technische Produkte
Timing Belts and Pulleys - REIFF Technische Produkte
Timing Belts and Pulleys - REIFF Technische Produkte
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TIMING BELTS/BELT PULLEYS AND CHAINS 3/49<br />
BRECO ® AT 10 DC / T 10 DC<br />
<strong>Timing</strong> belt lock for BRECO ® TIMING BELTS<br />
The main application area for the BRECO ® timing belt lock for the<br />
timing belt types AT10 DC <strong>and</strong> T10 DC <strong>and</strong> T10 DC is for drives with<br />
small loads. The lock provides the user with significant time <strong>and</strong><br />
thus cost benefits everywhere where the timing belt should not be<br />
combined to a continuous belt until after insertion in the machine<br />
for design reasons.<br />
Use as "emergency timing belt" for bridging shutdowns after<br />
malfunctions <strong>and</strong> thus possible associated belt failures is also<br />
possible. When using the lock for timing belts with welded on<br />
profiles, minimum profile clearance of 100 mm must be taken<br />
into account.<br />
AT 10 DC / T 10 DC timing belt lock<br />
Lock element material<br />
Carbon fibre reinforced<br />
high-strength polyamide<br />
AT 10 DC / T 10 DC timing belt lock (functional principle)<br />
Lock length<br />
(tooth centre to tooth centre)<br />
90 mm<br />
Number of connection elements 10<br />
Width of the back elements<br />
8 mm<br />
<strong>Timing</strong> belt overall thickness<br />
(design DC)<br />
5.5 mm<br />
Minimum number of teeth of the<br />
pulley (only use normal gaps)<br />
25<br />
<strong>Timing</strong> belt lock AT 10 DC / T 10 DC<br />
Lock widths (mm) 32 50 75 100<br />
Permitted tensile force (N) 550 750 1000 1500<br />
New in catalogue.<br />
Telephone hotline: +49 1803 00 26 22 12 / Fax hotline: +49 1803 00 26 22 13 9 cents/60 sec. from the German fixed network